1. 17 Jan, 2017 9 commits
    • Martin KaFai Lau's avatar
      bpf: Fix test_lru_sanity5() in test_lru_map.c · 3fbfadce
      Martin KaFai Lau authored
      test_lru_sanity5() fails when the number of online cpus
      is fewer than the number of possible cpus.  It can be
      reproduced with qemu by using cmd args "--smp cpus=2,maxcpus=8".
      
      The problem is the loop in test_lru_sanity5() is testing
      'i' which is incorrect.
      
      This patch:
      1. Make sched_next_online() always return -1 if it cannot
         find a next cpu to schedule the process.
      2. In test_lru_sanity5(), the parent process does
         sched_setaffinity() first (through sched_next_online())
         and the forked process will inherit it according to
         the 'man sched_setaffinity'.
      
      Fixes: 5db58faf ("bpf: Add tests for the LRU bpf_htab")
      Reported-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3fbfadce
    • Lance Richardson's avatar
      vxlan: fix byte order of vxlan-gpe port number · d5ff72d9
      Lance Richardson authored
      vxlan->cfg.dst_port is in network byte order, so an htons()
      is needed here. Also reduced comment length to stay closer
      to 80 column width (still slightly over, however).
      
      Fixes: e1e5314d ("vxlan: implement GPE")
      Signed-off-by: default avatarLance Richardson <lrichard@redhat.com>
      Acked-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5ff72d9
    • Julia Lawall's avatar
      stmmac: add missing of_node_put · a249708b
      Julia Lawall authored
      The function stmmac_dt_phy provides several possibilities for initializing
      plat->mdio_node, all of which have the effect of increasing the reference
      count of the assigned value.  This field is not updated elsewhere, so the
      value is live until the end of the lifetime of plat (devm_allocated), just
      after the end of stmmac_remove_config_dt.  Thus, add an of_node_put on
      plat->mdio_node in stmmac_remove_config_dt.  It is possible that the field
      mdio_node is never initialized, but of_node_put is NULL-safe, so it is also
      safe to call of_node_put in that case.
      Signed-off-by: default avatarJulia Lawall <Julia.Lawall@lip6.fr>
      Acked-by: default avatarAlexandre TORGUE <alexandre.torgue@st.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a249708b
    • Rolf Neugebauer's avatar
      virtio: don't set VIRTIO_NET_HDR_F_DATA_VALID on xmit · 501db511
      Rolf Neugebauer authored
      This patch part reverts fd2a0437 and e858fae2 which introduced a
      subtle change in how the virtio_net flags are derived from the SKBs
      ip_summed field.
      
      With the above commits, the flags are set to VIRTIO_NET_HDR_F_DATA_VALID
      when ip_summed == CHECKSUM_UNNECESSARY, thus treating it differently to
      ip_summed == CHECKSUM_NONE, which should be the same.
      
      Further, the virtio spec 1.0 / CS04 explicitly says that
      VIRTIO_NET_HDR_F_DATA_VALID must not be set by the driver.
      
      Fixes: fd2a0437 ("virtio_net: introduce virtio_net_hdr_{from,to}_skb")
      Fixes: e858fae2 (" virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
      Signed-off-by: default avatarRolf Neugebauer <rolf.neugebauer@docker.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      501db511
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4b19a9e2
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Handle multicast packets properly in fast-RX path of mac80211, from
          Johannes Berg.
      
       2) Because of a logic bug, the user can't actually force SW
          checksumming on r8152 devices. This makes diagnosis of hw
          checksumming bugs really annoying. Fix from Hayes Wang.
      
       3) VXLAN route lookup does not take the source and destination ports
          into account, which means IPSEC policies cannot be matched properly.
          Fix from Martynas Pumputis.
      
       4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.
      
       5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.
      
       6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
          construction properly in fib_dump_info(), from David Ahern.
      
       7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
          Schmidt.
      
       8) Openvswitch conntack actions need to maintain a correct checksum,
          fix from Lance Richardson.
      
       9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
          fact it already checks this, but not in all of the necessary spots.
          Fix from Basil Gunn.
      
      10) Action GET operations in the packet scheduler can erroneously bump
          the reference count of the entry, making it unreleasable. Fix from
          Jamal Hadi Salim. Jamal gives a great set of example command lines
          that trigger this in the commit message.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
        net sched actions: fix refcnt when GETing of action after bind
        net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
        net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
        net/mlx4_core: Fix racy CQ (Completion Queue) free
        net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
        net/mlx5e: Fix a -Wmaybe-uninitialized warning
        ax25: Fix segfault after sock connection timeout
        bpf: rework prog_digest into prog_tag
        tipc: allocate user memory with GFP_KERNEL flag
        net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
        ip6_tunnel: Account for tunnel header in tunnel MTU
        mld: do not remove mld souce list info when set link down
        be2net: fix MAC addr setting on privileged BE3 VFs
        be2net: don't delete MAC on close on unprivileged BE3 VFs
        be2net: fix status check in be_cmd_pmac_add()
        cpmac: remove hopeless #warning
        ravb: do not use zero-length alignment DMA descriptor
        mlx4: do not call napi_schedule() without care
        openvswitch: maintain correct checksum state in conntrack actions
        tcp: fix tcp_fastopen unaligned access complaints on sparc
        ...
      4b19a9e2
    • Linus Torvalds's avatar
      Merge branch 'stable/for-linus-4.10' of... · 203f80f1
      Linus Torvalds authored
      Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
      
      Pull swiotlb fix from Konrad Rzeszutek Wilk:
       "A tiny fix to make sure that page-sized mappings are page-aligned (and
        not say straddle two pages). This is important for some drivers (such
        as NVME)"
      
      * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
        swiotlb: ensure that page-sized mappings are page-aligned
      203f80f1
    • Linus Torvalds's avatar
      Merge tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · 7e84b303
      Linus Torvalds authored
      Pull MMC fixes from Ulf Hansson:
       "MMC core:
         - fix regressions detecting HS/HS DDR eMMC cards related to CMD6
      
        MMC host:
         - mmc: mxs-mmc: Fix additional cycles after transmission stop
         - sdhci-acpi: Only powered up enabled acpi child devices
         - meson: avoid possible NULL dereference"
      
      * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
        mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
        mmc: mxs-mmc: Fix additional cycles after transmission stop
        mmc: sdhci-acpi: Only powered up enabled acpi child devices
        MMC: meson: avoid possible NULL dereference
      7e84b303
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd · 7d8b8c09
      Linus Torvalds authored
      Pull MTD fixes from Brian Norris:
       "Just NAND updates from Boris:
      
         - avoid compiling xway NAND controller driver as a module (which
           didn't work)
      
         - fix tango NAND DT binding and make sure the controller is in a
           clean state at probe time
      
         - add dependency on HAS_IOMEM to the oxnas NAND driver
      
         - fix irq number validity check in the lpc32xx driver"
      
      * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd:
        mtd: nand: lpc32xx: fix invalid error handling of a requested irq
        mtd: nand: tango: Reset pbus to raw mode in probe
        mtd: nand: tango: Update DT binding description
        mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
        mtd: nand: xway: fix build because of module functions
        mtd: nand: xway: disable module support
      7d8b8c09
    • Jamal Hadi Salim's avatar
      net sched actions: fix refcnt when GETing of action after bind · 0faa9cb5
      Jamal Hadi Salim authored
      Demonstrating the issue:
      
      .. add a drop action
      $sudo $TC actions add action drop index 10
      
      .. retrieve it
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 0 installed 29 sec used 29 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      ... bug 1 above: reference is two.
          Reference is actually 1 but we forget to subtract 1.
      
      ... do a GET again and we see the same issue
          try a few times and nothing changes
      ~$ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 0 installed 31 sec used 31 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      ... lets try to bind the action to a filter..
      $ sudo $TC qdisc add dev lo ingress
      $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
        u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
      
      ... and now a few GETs:
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 3 bind 1 installed 204 sec used 204 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 4 bind 1 installed 206 sec used 206 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 5 bind 1 installed 235 sec used 235 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      .... as can be observed the reference count keeps going up.
      
      After the fix
      
      $ sudo $TC actions add action drop index 10
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 1 bind 0 installed 4 sec used 4 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 1 bind 0 installed 6 sec used 6 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC qdisc add dev lo ingress
      $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
        u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 1 installed 32 sec used 32 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      $ sudo $TC -s actions get action gact index 10
      
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 10 ref 2 bind 1 installed 33 sec used 33 sec
       	Action statistics:
      	Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
      	backlog 0b 0p requeues 0
      
      Fixes: aecc5cef ("net sched actions: fix GETing actions")
      Signed-off-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0faa9cb5
  2. 16 Jan, 2017 26 commits
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 5cf7a0f3
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
      
       - fix invalid fget()/fput() calls when doing file locking
      
       - fix multiple directory cache invalidation issues due to the client
         failing to recognise that the directory wasn't changed
      
       - fix client recovery when server reboots multiple times
      
      * tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        NFSv4: Fix client recovery when server reboots multiple times
        NFSv4: update_changeattr should update the attribute timestamp
        NFSv4: Don't call update_changeattr() unless the unlink is successful
        NFSv4: Don't apply change_info4 twice on rename within a directory
        NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created
        nfs: Don't take a reference on fl->fl_file for LOCK operation
      5cf7a0f3
    • David S. Miller's avatar
      Merge branch 'mlx4-core-fixes' · 617125e7
      David S. Miller authored
      Tariq Toukan says:
      
      ====================
      mlx4 core fixes
      
      This patchset contains bug fixes from Jack to the mlx4 Core driver.
      
      Patch 1 solves a race in the flow of CQ free.
      Patch 2 moves some qp context flags update to the correct qp transition.
      Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log,
      and keeps them only in the path of SRQ_CATAS_ERROR.
      
      Series generated against net commit:
      1a717fcf Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      617125e7
    • Jack Morgenstein's avatar
      net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV · 9577b174
      Jack Morgenstein authored
      When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's
      message log when (correct, normally operating) apps use SRQ LIMIT events
      as a trigger to post WQEs to SRQs.
      
      Add more information to the existing debug printout for SRQ_LIMIT, and
      output the warning messages only for the SRQ CATAS ERROR event.
      
      Fixes: acba2420 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs")
      Fixes: e0debf9c ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9577b174
    • Jack Morgenstein's avatar
      net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions · 7c3945bc
      Jack Morgenstein authored
      Save the qp context flags byte containing the flag disabling vlan stripping
      in the RESET to INIT qp transition, rather than in the INIT to RTR
      transition. Per the firmware spec, the flags in this byte are active
      in the RESET to INIT transition.
      
      As a result of saving the flags in the incorrect qp transition, when
      switching dynamically from VGT to VST and back to VGT, the vlan
      remained stripped (as is required for VST) and did not return to
      not-stripped (as is required for VGT).
      
      Fixes: f0f829bf ("net/mlx4_core: Add immediate activate for VGT->VST->VGT")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7c3945bc
    • Jack Morgenstein's avatar
      net/mlx4_core: Fix racy CQ (Completion Queue) free · 291c566a
      Jack Morgenstein authored
      In function mlx4_cq_completion() and mlx4_cq_event(), the
      radix_tree_lookup requires a rcu_read_lock.
      This is mandatory: if another core frees the CQ, it could
      run the radix_tree_node_rcu_free() call_rcu() callback while
      its being used by the radix tree lookup function.
      
      Additionally, in function mlx4_cq_event(), since we are adding
      the rcu lock around the radix-tree lookup, we no longer need to take
      the spinlock. Also, the synchronize_irq() call for the async event
      eliminates the need for incrementing the cq reference count in
      mlx4_cq_event().
      
      Other changes:
      1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
         we no longer take this spinlock in the interrupt context.
         The spinlock here, therefore, simply protects against different
         threads simultaneously invoking mlx4_cq_free() for different cq's.
      
      2. In function mlx4_cq_free(), we move the radix tree delete to before
         the synchronize_irq() calls. This guarantees that we will not
         access this cq during any subsequent interrupts, and therefore can
         safely free the CQ after the synchronize_irq calls. The rcu_read_lock
         in the interrupt handlers only needs to protect against corrupting the
         radix tree; the interrupt handlers may access the cq outside the
         rcu_read_lock due to the synchronize_irq calls which protect against
         premature freeing of the cq.
      
      3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.
      
      4. We leave the cq reference count mechanism in place, because it is
         still needed for the cq completion tasklet mechanism.
      
      Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
      Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
      Signed-off-by: default avatarJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: default avatarMatan Barak <matanb@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      291c566a
    • Heiner Kallweit's avatar
      net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered · b618ab45
      Heiner Kallweit authored
      Don't use netdev_info and friends before the net_device is registered.
      This avoids ugly messages like
      "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized):
      Enable RX Mitigation via HW Watchdog Timer"
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b618ab45
    • Arnd Bergmann's avatar
      net/mlx5e: Fix a -Wmaybe-uninitialized warning · abeffce9
      Arnd Bergmann authored
      As found by Olof's build bot, we gain a harmless warning about a
      potential uninitialized variable reference in mlx5:
      
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions':
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized]
      drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here
      
      This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair
      that gcc is unfortunately unable to completely figure out.
      
      The problem being gcc cannot tell that if(IS_ERR()) in
      mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later,
      so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'.
      
      The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect
      by gcc, so it can't get that wrong, so it no longer warns.
      
      Hadar Hen Zion already attempted to fix the warning earlier by adding fake
      initializations, but that ended up not fully addressing all warnings, so
      I'm reverting it now that it is no longer needed.
      
      Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/
      Fixes: a42485eb ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes")
      Fixes: a757d108 ("net/mlx5e: Fix kbuild warnings for uninitialized parameters")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      abeffce9
    • Basil Gunn's avatar
      ax25: Fix segfault after sock connection timeout · 8a367e74
      Basil Gunn authored
      The ax.25 socket connection timed out & the sock struct has been
      previously taken down ie. sock struct is now a NULL pointer. Checking
      the sock_flag causes the segfault.  Check if the socket struct pointer
      is NULL before checking sock_flag. This segfault is seen in
      timed out netrom connections.
      
      Please submit to -stable.
      Signed-off-by: default avatarBasil Gunn <basil@pacabunga.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a367e74
    • Daniel Borkmann's avatar
      bpf: rework prog_digest into prog_tag · f1f7714e
      Daniel Borkmann authored
      Commit 7bd509e3 ("bpf: add prog_digest and expose it via
      fdinfo/netlink") was recently discussed, partially due to
      admittedly suboptimal name of "prog_digest" in combination
      with sha1 hash usage, thus inevitably and rightfully concerns
      about its security in terms of collision resistance were
      raised with regards to use-cases.
      
      The intended use cases are for debugging resp. introspection
      only for providing a stable "tag" over the instruction sequence
      that both kernel and user space can calculate independently.
      It's not usable at all for making a security relevant decision.
      So collisions where two different instruction sequences generate
      the same tag can happen, but ideally at a rather low rate. The
      "tag" will be dumped in hex and is short enough to introspect
      in tracepoints or kallsyms output along with other data such
      as stack trace, etc. Thus, this patch performs a rename into
      prog_tag and truncates the tag to a short output (64 bits) to
      make it obvious it's not collision-free.
      
      Should in future a hash or facility be needed with a security
      relevant focus, then we can think about requirements, constraints,
      etc that would fit to that situation. For now, rework the exposed
      parts for the current use cases as long as nothing has been
      released yet. Tested on x86_64 and s390x.
      
      Fixes: 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Cc: Andy Lutomirski <luto@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1f7714e
    • Parthasarathy Bhuvaragan's avatar
      tipc: allocate user memory with GFP_KERNEL flag · 57d5f64d
      Parthasarathy Bhuvaragan authored
      Until now, we allocate memory always with GFP_ATOMIC flag.
      When the system is under memory pressure and a user tries to send,
      the send fails due to low memory. However, the user application
      can wait for free memory if we allocate it using GFP_KERNEL flag.
      
      In this commit, we use allocate memory with GFP_KERNEL for all user
      allocation.
      Reported-by: default avatarRune Torgersen <runet@innovsys.com>
      Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57d5f64d
    • Karicheri, Muralidharan's avatar
      net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types · 34c55cf2
      Karicheri, Muralidharan authored
      Currently dp83867 driver returns error if phy interface type
      PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal
      delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID.
      Fix this by checking also the interface type if a particular delay
      value is missing in the phy dt bindings. Also update the DT document
      accordingly.
      Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34c55cf2
    • Jakub Sitnicki's avatar
      ip6_tunnel: Account for tunnel header in tunnel MTU · 02ca0423
      Jakub Sitnicki authored
      With ip6gre we have a tunnel header which also makes the tunnel MTU
      smaller. We need to reserve room for it. Previously we were using up
      space reserved for the Tunnel Encapsulation Limit option
      header (RFC 2473).
      
      Also, after commit b05229f4 ("gre6: Cleanup GREv6 transmit path,
      call common GRE functions") our contract with the caller has
      changed. Now we check if the packet length exceeds the tunnel MTU after
      the tunnel header has been pushed, unlike before.
      
      This is reflected in the check where we look at the packet length minus
      the size of the tunnel header, which is already accounted for in tunnel
      MTU.
      
      Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions")
      Signed-off-by: default avatarJakub Sitnicki <jkbs@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02ca0423
    • Hangbin Liu's avatar
      mld: do not remove mld souce list info when set link down · 1666d49e
      Hangbin Liu authored
      This is an IPv6 version of commit 24803f38 ("igmp: do not remove igmp
      souce list..."). In mld_del_delrec(), we will restore back all source filter
      info instead of flush them.
      
      Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since
      we should not remove source list info when set link down. Remove
      igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in
      ipv6_mc_down().
      
      Also clear all source info after igmp6_group_dropped() instead of in it
      because ipv6_mc_down() will call igmp6_group_dropped().
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1666d49e
    • Linus Torvalds's avatar
      Merge tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux · 2eabb8b8
      Linus Torvalds authored
      Pull nfsd fixes from Bruce Fields:
       "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for
        older bugs"
      
      * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux:
        svcrdma: avoid duplicate dma unmapping during error recovery
        sunrpc: don't call sleeping functions from the notifier block callbacks
        svcrpc: don't leak contexts on PROC_DESTROY
        nfsd: fix supported attributes for acl & labels
      2eabb8b8
    • Ivan Vecera's avatar
      be2net: fix MAC addr setting on privileged BE3 VFs · 34393529
      Ivan Vecera authored
      During interface opening MAC address stored in netdev->dev_addr is
      programmed in the HW with exception of BE3 VFs where the initial
      MAC is programmed by parent PF. This is OK when MAC address is not
      changed when an interfaces is down. In this case the requested MAC is
      stored to netdev->dev_addr and later is stored into HW during opening.
      But this is not done for all BE3 VFs so the NIC HW does not know
      anything about this change and all traffic is filtered.
      
      This is the case of bonding if fail_over_mac == 0 where the MACs of
      the slaves are changed while they are down.
      
      The be2net behavior is too restrictive because if a BE3 VF has
      the FILTMGMT privilege then it is able to modify its MAC without
      any restriction.
      
      To solve the described problem the driver should take care about these
      privileged BE3 VFs so the MAC is programmed during opening. And by
      contrast unpriviled BE3 VFs should not be allowed to change its MAC
      in any case.
      
      Cc: Sathya Perla <sathya.perla@broadcom.com>
      Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
      Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
      Cc: Somnath Kotur <somnath.kotur@broadcom.com>
      Signed-off-by: default avatarIvan Vecera <cera@cera.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34393529
    • Ivan Vecera's avatar
      be2net: don't delete MAC on close on unprivileged BE3 VFs · 6d928ae5
      Ivan Vecera authored
      BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC,
      VLAN table and UC/MC lists. So don't try to delete MAC on such VFs.
      
      Cc: Sathya Perla <sathya.perla@broadcom.com>
      Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
      Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
      Cc: Somnath Kotur <somnath.kotur@broadcom.com>
      Signed-off-by: default avatarIvan Vecera <cera@cera.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d928ae5
    • Ivan Vecera's avatar
      be2net: fix status check in be_cmd_pmac_add() · fe68d8bf
      Ivan Vecera authored
      Return value from be_mcc_notify_wait() contains a base completion status
      together with an additional status. The base_status() macro need to be
      used to access base status.
      
      Fixes: e3a7ae2c be2net: Changing MAC Address of a VF was broken
      Cc: Sathya Perla <sathya.perla@broadcom.com>
      Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
      Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
      Cc: Somnath Kotur <somnath.kotur@broadcom.com>
      Signed-off-by: default avatarIvan Vecera <cera@cera.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe68d8bf
    • Arnd Bergmann's avatar
      cpmac: remove hopeless #warning · d43e6fb4
      Arnd Bergmann authored
      The #warning was present 10 years ago when the driver first got merged.
      As the platform is rather obsolete by now, it seems very unlikely that
      the warning will cause anyone to fix the code properly.
      
      kernelci.org reports the warning for every build in the meantime, so
      I think it's better to just turn it into a code comment to reduce
      noise.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d43e6fb4
    • Masaru Nagai's avatar
      ravb: do not use zero-length alignment DMA descriptor · 8ec3e8a1
      Masaru Nagai authored
      Due to alignment requirements of the hardware transmissions are split into
      two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length
      followed by a descriptor for rest of the packet.
      
      In the case of IP packets the first descriptor will never be zero due to
      the way that the stack aligns buffers for IP packets. However, for non-IP
      packets it may be zero.
      
      In that case it has been reported that timeouts occur, presumably because
      transmission stops at the first zero-length DMA descriptor and thus the
      packet is not transmitted. However, in my environment a BUG is triggered as
      follows:
      
      [   20.381417] ------------[ cut here ]------------
      [   20.386054] kernel BUG at lib/swiotlb.c:495!
      [   20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
      [   20.395805] Modules linked in:
      [   20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162
      [   20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT)
      [   20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000
      [   20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec
      [   20.424625] LR is at map_single+0x4c/0x98
      [   20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5
      [   20.436019] sp : ffff80063a71f9b0
      [   20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500
      [   20.444636] x27: ffff000008ed5000 x26: 0000000000000000
      [   20.449944] x25: 000000067abe2adc x24: 0000000000000000
      [   20.455252] x23: 0000000000200000 x22: 0000000000000001
      [   20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010
      [   20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20
      [   20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70
      [   20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14
      [   20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2
      [   20.487098] x11: ffff000008096360 x10: ffff80063abe2adc
      [   20.492407] x9 : 0000000000000000 x8 : 0000000000000000
      [   20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0
      [   20.503028] x5 : 0000000000000000 x4 : 0000000000000001
      [   20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc
      [   20.513648] x1 : 00000000bafff000 x0 : 0000000000000000
      [   20.518958]
      [   20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000)
      [   20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000)
      [   20.532543] f9a0:                                   ffff80063a71fa30 ffff00000839c680
      [   20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000
      [   20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000
      [   20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000
      [   20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10
      [   20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc
      [   20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000
      [   20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770
      [   20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140
      [   20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000
      [   20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00
      [   20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000
      [   20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000
      [   20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8
      [   20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500
      [   20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000
      [   20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500
      [   20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400
      [   20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c
      [   20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24
      [   20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea
      [   20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0
      [   20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240
      [   20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000
      [   20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015
      [   20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900
      [   20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4
      [   20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e
      [   20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000
      [   20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300
      [   20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
      [   20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20
      [   20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000
      [   20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232
      [   20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001
      [   20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000
      [   20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
      [   20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00
      [   20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c
      [   20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000
      [   20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015
      [   20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000
      [   20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000
      [   20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000
      [   20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588
      [   20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010
      [   20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f
      [   20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000
      [   20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0
      [   20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce
      [   20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff
      [   20.931867] Call trace:
      [   20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910)
      [   20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0
      [   20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448
      [   20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458
      [   20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001
      [   20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4
      [   20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000
      [   20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000
      [   20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360
      [   21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588
      [   21.011219] f900: ffff0000087c8b70 0000ffffa09ba018
      [   21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec
      [   21.022362] [<ffff00000839c680>] map_single+0x4c/0x98
      [   21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138
      [   21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c
      [   21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668
      [   21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120
      [   21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0
      [   21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc
      [   21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18
      [   21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220
      [   21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c
      [   21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0
      [   21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28
      [   21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000)
      [   21.094611] ---[ end trace 5bc544ad491f3814 ]---
      [   21.099234] Kernel panic - not syncing: Fatal exception in interrupt
      [   21.105587] Kernel Offset: disabled
      [   21.109073] Memory Limit: none
      [   21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
      
      Fixes: 2f45d190 ("ravb: minimize TX data copying")
      Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com
      Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
      Acked-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ec3e8a1
    • Eric Dumazet's avatar
      mlx4: do not call napi_schedule() without care · 8cf699ec
      Eric Dumazet authored
      Disable BH around the call to napi_schedule() to avoid following warning
      
      [   52.095499] NOHZ: local_softirq_pending 08
      [   52.421291] NOHZ: local_softirq_pending 08
      [   52.608313] NOHZ: local_softirq_pending 08
      
      Fixes: 8d59de8f ("net/mlx4_en: Process all completions in RX rings after port goes up")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Erez Shitrit <erezsh@mellanox.com>
      Cc: Eugenia Emantayev <eugenia@mellanox.com>
      Cc: Tariq Toukan <tariqt@mellanox.com>
      Acked-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8cf699ec
    • David S. Miller's avatar
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth · 50719195
      David S. Miller authored
      Johan Hedberg says:
      
      ====================
      pull request: bluetooth 2017-01-16
      
      Here are a couple of important 802.15.4 driver fixes for the 4.10
      kernel.
      
      Please let me know if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50719195
    • Ulf Hansson's avatar
      mmc: core: Restore parts of the polling policy when switch to HS/HS DDR · ee6ff743
      Ulf Hansson authored
      Regressions for not being able to detect an eMMC HS DDR mode card has been
      reported for the sdhci-esdhc-imx driver, but potentially other sdhci
      variants may suffer from the similar problem.
      
      The commit e173f891 ("mmc: core: Update CMD13 polling policy when
      switch to HS DDR mode"), is causing the problem. It seems that change moved
      one step to far, regarding changing the host's timing before polling for a
      busy card.
      
      To fix this, let's move back to the behaviour when the host's timing is
      updated after the polling, but before the switch status is fetched and
      validated.
      
      In cases when polling with CMD13, we keep validating the switch status at
      each attempt. However, to align with the other card busy detections
      mechanism, let's fetch and validate the switch status also after the host's
      timing is updated.
      Reported-by: default avatarClemens Gruber <clemens.gruber@pqgruber.com>
      Reported-by: default avatarGary Bisson <gary.bisson@boundarydevices.com>
      Fixes: e173f891 ("mmc: core: Update CMD13 polling policy when switch..")
      Cc: Shawn Lin <shawn.lin@rock-chips.com>
      Cc: Dong Aisheng <aisheng.dong@nxp.com>
      Cc: Haibo Chen <haibo.chen@nxp.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Tested-by: default avatarClemens Gruber <clemens.gruber@pqgruber.com>
      Tested-by: default avatarJagan Teki <jagan@amarulasolutions.com>
      Reviewed-by: default avatarShawn Lin <shawn.lin@rock-chips.com>
      Tested-by: default avatarHaibo Chen <haibo.chen@nxp.com>
      Reviewed-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
      ee6ff743
    • David S. Miller's avatar
      Merge tag 'mac80211-for-davem-2017-01-13' of... · 1a717fcf
      David S. Miller authored
      Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      
      Johannes Berg says:
      
      ====================
      We have a number of fixes, in part because I was late
      in actually sending them out - will try to do better in
      the future:
       * handle VHT opmode properly when hostapd is controlling
         full station state
       * two fixes for minimum channel width in mac80211
       * don't leave SMPS set to junk in HT capabilities
       * fix headroom when forwarding mesh packets, recently
         broken by another fix that failed to take into account
         frame encryption
       * fix the TID in null-data packets indicating EOSP (end
         of service period) in U-APSD
       * prevent attempting to use (and then failing which
         results in crashes) TXQs on stations that aren't added
         to the driver yet
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a717fcf
    • Lance Richardson's avatar
      openvswitch: maintain correct checksum state in conntrack actions · 75f01a4c
      Lance Richardson authored
      When executing conntrack actions on skbuffs with checksum mode
      CHECKSUM_COMPLETE, the checksum must be updated to account for
      header pushes and pulls. Otherwise we get "hw csum failure"
      logs similar to this (ICMP packet received on geneve tunnel
      via ixgbe NIC):
      
      [  405.740065] genev_sys_6081: hw csum failure
      [  405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G          I     4.10.0-rc3+ #1
      [  405.740108] Call Trace:
      [  405.740110]  <IRQ>
      [  405.740113]  dump_stack+0x63/0x87
      [  405.740116]  netdev_rx_csum_fault+0x3a/0x40
      [  405.740118]  __skb_checksum_complete+0xcf/0xe0
      [  405.740120]  nf_ip_checksum+0xc8/0xf0
      [  405.740124]  icmp_error+0x1de/0x351 [nf_conntrack_ipv4]
      [  405.740132]  nf_conntrack_in+0xe1/0x550 [nf_conntrack]
      [  405.740137]  ? find_bucket.isra.2+0x62/0x70 [openvswitch]
      [  405.740143]  __ovs_ct_lookup+0x95/0x980 [openvswitch]
      [  405.740145]  ? netif_rx_internal+0x44/0x110
      [  405.740149]  ovs_ct_execute+0x147/0x4b0 [openvswitch]
      [  405.740153]  do_execute_actions+0x22e/0xa70 [openvswitch]
      [  405.740157]  ovs_execute_actions+0x40/0x120 [openvswitch]
      [  405.740161]  ovs_dp_process_packet+0x84/0x120 [openvswitch]
      [  405.740166]  ovs_vport_receive+0x73/0xd0 [openvswitch]
      [  405.740168]  ? udp_rcv+0x1a/0x20
      [  405.740170]  ? ip_local_deliver_finish+0x93/0x1e0
      [  405.740172]  ? ip_local_deliver+0x6f/0xe0
      [  405.740174]  ? ip_rcv_finish+0x3a0/0x3a0
      [  405.740176]  ? ip_rcv_finish+0xdb/0x3a0
      [  405.740177]  ? ip_rcv+0x2a7/0x400
      [  405.740180]  ? __netif_receive_skb_core+0x970/0xa00
      [  405.740185]  netdev_frame_hook+0xd3/0x160 [openvswitch]
      [  405.740187]  __netif_receive_skb_core+0x1dc/0xa00
      [  405.740194]  ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe]
      [  405.740197]  __netif_receive_skb+0x18/0x60
      [  405.740199]  netif_receive_skb_internal+0x40/0xb0
      [  405.740201]  napi_gro_receive+0xcd/0x120
      [  405.740204]  gro_cell_poll+0x57/0x80 [geneve]
      [  405.740206]  net_rx_action+0x260/0x3c0
      [  405.740209]  __do_softirq+0xc9/0x28c
      [  405.740211]  irq_exit+0xd9/0xf0
      [  405.740213]  do_IRQ+0x51/0xd0
      [  405.740215]  common_interrupt+0x93/0x93
      
      Fixes: 7f8a436e ("openvswitch: Add conntrack action")
      Signed-off-by: default avatarLance Richardson <lrichard@redhat.com>
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      75f01a4c
    • Linus Torvalds's avatar
      Linux 4.10-rc4 · 49def185
      Linus Torvalds authored
      49def185
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace · 99421c1c
      Linus Torvalds authored
      Pull namespace fixes from Eric Biederman:
       "This tree contains 4 fixes.
      
        The first is a fix for a race that can causes oopses under the right
        circumstances, and that someone just recently encountered.
      
        Past that are several small trivial correct fixes. A real issue that
        was blocking development of an out of tree driver, but does not appear
        to have caused any actual problems for in-tree code. A potential
        deadlock that was reported by lockdep. And a deadlock people have
        experienced and took the time to track down caused by a cleanup that
        removed the code to drop a reference count"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
        sysctl: Drop reference added by grab_header in proc_sys_readdir
        pid: fix lockdep deadlock warning due to ucount_lock
        libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
        mnt: Protect the mountpoint hashtable with mount_lock
      99421c1c
  3. 15 Jan, 2017 5 commits
    • Linus Torvalds's avatar
      Merge tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · c9281627
      Linus Torvalds authored
      Pull char/misc driver fixes from Greg KH:
       "Here are some small char/misc driver fixes for 4.10-rc4 that resolve
        some reported issues.
      
        The MEI driver issue resolves a lot of problems that people have been
        having, as does the mem driver fix. The other minor fixes resolve
        other reported issues.
      
        All of these have been in linux-next for a while"
      
      * tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        vme: Fix wrong pointer utilization in ca91cx42_slave_get
        auxdisplay: fix new ht16k33 build errors
        ppdev: don't print a free'd string
        extcon: return error code on failure
        drivers: char: mem: Fix thinkos in kmem address checks
        mei: bus: enable OS version only for SPT and newer
      c9281627
    • Linus Torvalds's avatar
      Merge tag 'driver-core-4.10-rc4' of... · 2d5a7101
      Linus Torvalds authored
      Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
      
      Pull driver core fix from Greg KH:
       "Here is a single patch being reverted to remove a feature that was
        added in 4.10-rc1 that isn't quite ready for release.
      
        It will be redone as a debugfs file instead of a sysfs file in the
        future"
      
      * tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        Revert "driver core: Add deferred_probe attribute to devices in sysfs"
      2d5a7101
    • Linus Torvalds's avatar
      Merge tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 7f138b97
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a
        number of reported issues.
      
        Nothing major here at all, one revert of a problematic patch, and some
        other tiny bugfixes. Full details are in the shortlog below.
      
        All have been in linux-next with no reported issues"
      
      * tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        sysrq: attach sysrq handler correctly for 32-bit kernel
        Revert "tty: serial: 8250: add CON_CONSDEV to flags"
        Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
        8250_pci: Fix potential use-after-free in error path
        tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
        tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
      7f138b97
    • Linus Torvalds's avatar
      Merge tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 793e039e
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a few small USB driver fixes for 4.10-rc4 to resolve some
        reported issues.
      
        The "largest" here is a number of bugs being fixed in the ch341
        usb-serial driver, to hopefully resolve the mess of different devices
        floating around that use this driver that have been having problems
        with the 4.10-rc1 release.
      
        There's also a tiny musb fix that I missed in the last pull request,
        as well as the traditional xhci fix rounding out the batch.
      
        All have been in linux-next with no reported issues"
      
      * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        xhci: fix deadlock at host remove by running watchdog correctly
        USB: serial: ch341: fix control-message error handling
        usb: musb: fix runtime PM in debugfs
        wusbcore: Fix one more crypto-on-the-stack bug
        USB: serial: kl5kusb105: fix line-state error handling
        USB: serial: ch341: fix baud rate and line-control handling
        USB: serial: ch341: fix line settings after reset-resume
        USB: serial: ch341: fix resume after reset
        USB: serial: ch341: fix open error handling
        USB: serial: ch341: fix modem-control and B0 handling
        USB: serial: ch341: fix open and resume after B0
        USB: serial: ch341: fix initial modem-control state
      793e039e
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · aa2797b3
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "Bugfixes for I2C. Mostly core this time which is a bit unusual but
        nothing really scary in there"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: piix4: Avoid race conditions with IMC
        i2c: fix spelling mistake: "insufficent" -> "insufficient"
        i2c: print correct device invalid address
        i2c: do not enable fall back to Host Notify by default
        i2c: fix kernel memory disclosure in dev interface
      aa2797b3