- 19 Jun, 2014 7 commits
-
-
Kuninori Morimoto authored
Current usbhs gadget driver didn't complete STATUS stage after receiving. It wasn't problem for us before, because some USB class doesn't use DATA OUT stage in control transfer. But, it is required on some device. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Jeff Westfahl authored
When disconnecting, it's possible that another thread has already made it into eth_start_xmit before we call netif_stop_queue. This can lead to a crash as eth_start_xmit tries to use resources that gether_disconnect is freeing. Use netif_tx_lock/unlock around netif_stop_queue to ensure no threads are executing during the remainder of gether_disconnect. Signed-off-by:
Jeff Westfahl <jeff.westfahl@ni.com> Tested-by:
Jaeden Amero <jaeden.amero@ni.com> Signed-off-by:
-
George Cherian authored
The dwc3 wrapper driver should not be fiddling with the core interrupts. Disabling the core interrupts in prepare stops xhci from proper operation. So remove disable/enable of core interrupts from prepare/complete. Signed-off-by:
George Cherian <george.cherian@ti.com> Signed-off-by:
-
George Cherian authored
Following crash is seen on dwc3_omap removal Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = ec098000 [00000018] *pgd=ad1f9831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: usb_f_ss_lb g_zero usb_f_acm u_serial usb_f_ecm u_ether libcomposite configfs snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_hwdep snd_soc_omap snd_pcm_dmaengine snd_soc_core snd_compress snd_pcm snd_tim] CPU: 0 PID: 1296 Comm: rmmod Tainted: G W 3.15.0-rc4-02716-g95c4e18-dirty #10 task: ed05a080 ti: ec368000 task.ti: ec368000 PC is at release_resource+0x14/0x7c LR is at release_resource+0x10/0x7c pc : [<c0044724>] lr : [<c0044720>] psr: 60000013 sp : ec369ec0 ip : 60000013 fp : 00021008 r10: 00000000 r9 : ec368000 r8 : c000e7a4 r7 : 00000081 r6 : bf0062c0 r5 : ed7cd000 r4 : ed7d85c0 r3 : 00000000 r2 : 00000000 r1 : 00000011 r0 : c086d08c Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: ac098059 DAC: 00000015 Process rmmod (pid: 1296, stack limit = 0xec368248) Stack: (0xec369ec0 to 0xec36a000) 9ec0: 00000000 00000001 ed7cd000 c034de94 ed7cd010 ed7cd000 00000000 c034e194 9ee0: 00000000 bf0062cc ed7cd010 c03490b0 ed154cc0 ed4c2570 ed2b8410 ed156810 ed156810 bf006d24 c034db9c c034db84 c034c518 9f20: bf006d24 ed156810 bf006d24 c034cd2c bf006d24 bf006d68 00000800 c034c340 9f40: 00000000 c00a9e5c 00000020 00000000 bf006d68 00000800 ec369f4c 33637764 9f60: 616d6f5f 00000070 00000001 ec368000 ed05a080 c000e670 00000001 c0084010 9f80: 00021088 00000800 00021088 00000081 80000010 0000e6f4 00021088 00000800 9fa0: 00021088 c000e5e0 00021088 00000800 000210b8 00000800 e04f6d00 e04f6d00 9fc0: 00021088 00000800 00021088 00000081 00000001 00000000 be91de08 00021008 9fe0: 4d768880 be91dbb4 b6fc5984 4d76888c 80000010 000210b8 00000000 00000000 [<c0044724>] (release_resource) from [<c034de94>] (platform_device_del+0x6c/0x9c) [<c034de94>] (platform_device_del) from [<c034e194>] (platform_device_unregister+0xc/0x18) [<c034e194>] (platform_device_unregister) from [<bf0062cc>] (dwc3_omap_remove_core+0xc/0x14 [dwc3_omap]) [<bf0062cc>] (dwc3_omap_remove_core [dwc3_omap]) from [<c03490b0>] (device_for_each_child+0x34/0x74) [<c03490b0>] (device_for_each_child) from [<bf0062b4>] (dwc3_omap_remove+0x6c/0x78 [dwc3_omap]) [<bf0062b4>] (dwc3_omap_remove [dwc3_omap]) from [<c034db9c>] (platform_drv_remove+0x18/0x1c) [<c034db9c>] (platform_drv_remove) from [<c034c518>] (__device_release_driver+0x70/0xc8) [<c034c518>] (__device_release_driver) from [<c034cd2c>] (driver_detach+0xb4/0xb8) [<c034cd2c>] (driver_detach) from [<c034c340>] (bus_remove_driver+0x4c/0x90) [<c034c340>] (bus_remove_driver) from [<c00a9e5c>] (SyS_delete_module+0x10c/0x198) [<c00a9e5c>] (SyS_delete_module) from [<c000e5e0>] (ret_fast_syscall+0x0/0x48) Code: e1a04000 e59f0068 eb14505e e5943010 (e5932018) ---[ end trace 7e2a8746ff4fc811 ]--- Segmentation fault [ balbi@ti.com : add CONFIG_OF dependency ] Signed-off-by:
-
Dan Carpenter authored
This should be return -ENOMEM. The current code returns successs. Fixes: de7a8d2d ('usb: gadget: f_rndis: OS descriptors support') Acked-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michal Nazarewicz authored
Commit [ac8dde11: “usb: gadget: f_fs: Add flags to descriptors block”] which introduced a new descriptor format for FunctionFS removed the usb_functionfs_descs_head structure, which is still used by ffs-test. tool. Convert ffs-test by converting it to use the new header format. For testing kernels prior to 3.14 (when the new format was introduced) and parsing of the legacy headers in the new kernels, provide a compilation flag to make the tool use the old format. Finally, include information as to when the legacy FunctionFS headers format has been deprecated (which is also when the new one has been introduced). Reported-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Zhuang Jin Can authored
In ISOC transfers, when free_slot points to the last TRB (i.e. Link TRB), and all queued requests meet Missed Interval Isoc error, busy_slot points to trb0. busy_slot->trb0 trb1 ... free_slot->trb31(Link TRB) After end transfer and receiving the XferNotReady event, trb_left is caculated as 1 which is wrong, and no TRB will be primed to the endpoint. The root cause is free_slot is not increased the same way as busy_slot. When busy_slot is increased by one, it checks if points to a link TRB after increasement, but free_slot checks it before increasement. free_slot should behave the same as busy_slot to make the trb_left caculation correct. Reviewed-by:
Pratyush Anand <pratyush.anand@st.com> Signed-off-by:
Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by:
Jiebing Li <jiebing.li@intel.com> Signed-off-by:
-
- 16 Jun, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer -
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
-
git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds authored
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
-
- 15 Jun, 2014 11 commits
-
-
Daniel Borkmann authored
Commit 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by: -
Tom Herbert authored
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by:
-
Tom Herbert authored
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by:
-
Tom Herbert authored
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5 ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Tom Herbert authored
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is just a couple of drivers (hpsa and lpfc) that got left out for further testing in linux-next. We also have one fix to a prior submission (qla2xxx sparse)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch lpfc: Update lpfc version to driver version 10.2.8001.0 lpfc: Fix ExpressLane priority setup lpfc: mark old devices as obsolete lpfc: Fix for initializing RRQ bitmap lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries lpfc: Update lpfc version to driver version 10.2.8000.0 lpfc: Update Copyright on changed files from 8.3.45 patches lpfc: Update Copyright on changed files lpfc: Fixed locking for scsi task management commands lpfc: Convert runtime references to old xlane cfg param to fof cfg param lpfc: Fix FW dump using sysfs lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock lpfc: Fixed kernel panic in lpfc_abort_handler lpfc: Fix locking for postbufq when freeing lpfc: Fix locking for lpfc_hba_down_post lpfc: Fix dynamic transitions of FirstBurst from on to off hpsa: fix handling of hpsa_volume_offline return value hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id hpsa: remove messages about volume status VPD inquiry page not supported ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull more btrfs updates from Chris Mason: "This has a few fixes since our last pull and a new ioctl for doing btree searches from userland. It's very similar to the existing ioctl, but lets us return larger items back down to the app" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix error handling in create_pending_snapshot btrfs: fix use of uninit "ret" in end_extent_writepage() btrfs: free ulist in qgroup_shared_accounting() error path Btrfs: fix qgroups sanity test crash or hang btrfs: prevent RCU warning when dereferencing radix tree slot Btrfs: fix unfinished readahead thread for raid5/6 degraded mounting btrfs: new ioctl TREE_SEARCH_V2 btrfs: tree_search, search_ioctl: direct copy to userspace btrfs: new function read_extent_buffer_to_user btrfs: tree_search, copy_to_sk: return needed size on EOVERFLOW btrfs: tree_search, copy_to_sk: return EOVERFLOW for too small buffer btrfs: tree_search, search_ioctl: accept varying buffer btrfs: tree_search: eliminate redundant nr_items check
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio fix and cleanups from Ben LaHaise: "This consists of a couple of code cleanups plus a minor bug fix" * git://git.kvack.org/~bcrl/aio-next: aio: cleanup: flatten kill_ioctx() aio: report error from io_destroy() when threads race in io_destroy() fs/aio.c: Remove ctx parameter in kiocb_cancel
-
Al Viro authored
Tetsuo Handa wrote: "Commit 62a8067a ("bio_vec-backed iov_iter") introduced an unnamed union inside a struct which gcc-4.4.7 cannot handle. Name the unnamed union as u in order to fix build failure" Let's do this instead: there is only one place in the entire tree that steps into this breakage. Anon structs and unions work in older gcc versions; as the matter of fact, we have those in the tree - see e.g. struct ieee80211_tx_info in include/net/mac80211.h What doesn't work is handling their initializers: struct { int a; union { int b; char c; }; } x[2] = {{.a = 1, .c = 'a'}, {.a = 0, .b = 1}}; is the obvious syntax for initializer, perfectly fine for C11 and handled correctly by gcc-4.7 or later. Earlier versions, though, break on it - declaration is fine and so's access to fields (i.e. x[0].c = 'a'; would produce the right code), but members of the anon structs and unions are not inserted into the right namespace. Tellingly, those older versions will not barf on struct {int a; struct {int a;};}; - looks like they just have it hacked up somewhere around the handling of . and -> instead of doing the right thing. The easiest way to deal with that crap is to turn initialization of those fields (in the only place where we have such initializer of iov_iter) into plain assignment. Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Jun, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI build fixes from Sebastian Reichel: - tighten dependency between ssi-protocol and omap-ssi to fix build failures with randconfig. - use normal module refcounting in omap driver to fix build with disabled module support * tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: omap_ssi_port: use normal module refcounting HSI: fix omap ssi driver dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "A first GPIO fix for the v3.16 series, this was serious since it blocks the OMAP boot. Sending you this vital fix before leaving for a short vacation so it does not sit collecting dust in my tree for no good reason. Apart from this, our v3.16 cycle looks like a good start" * tag 'gpio-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: of: Fix handling for deferred probe for -gpio suffix
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vdso fixes from Peter Anvin: "Fixes for x86/vdso. One is a simple build fix for bigendian hosts, one is to make "make vdso_install" work again, and the rest is about working around a bug in Google's Go language -- two are documentation patches that improves the sample code that the Go coders took, modified, and broke; the other two implements a workaround that keeps existing Go binaries from segfaulting at least" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Fix vdso_install x86/vdso: Hack to keep 64-bit Go programs working x86/vdso: Add PUT_LE to store little-endian values x86/vdso/doc: Make vDSO examples more portable x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c x86, vdso: Remove one final use of htole16()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: - new driver for Sensirion SHTC1 humidity / temperature sensor - convert ltc4151 and vexpress drivers to use devm functions - drop generic chip detection from lm85 driver - avoid forward declarations in atxp1 driver - fix sign extensions in ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: vexpress: Use devm helper for hwmon device registration hwmon: (atxp1) Avoid forward declaration hwmon: add support for Sensirion SHTC1 sensor hwmon: (ltc4151) Convert to devm_hwmon_device_register_with_groups hwmon: (lm85) Drop generic detection hwmon: (ina2xx) Cast to s16 on shunt and current regs
-
- 13 Jun, 2014 14 commits
-
-
Eric Dumazet authored
Its too easy to add thousand of UDP sockets on a particular bucket, and slow down an innocent multicast receiver. Early demux is supposed to be an optimization, we should avoid spending too much time in it. It is interesting to note __udp4_lib_demux_lookup() only tries to match first socket in the chain. 10 is the threshold we already have in __udp4_lib_lookup() to switch to secondary hash. Fixes: 421b3885 ("udp: ipv4: Add udp early demux") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
David Held <drheld@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by:
-
Cong Wang authored
When we mirror packets from a vxlan tunnel to other device, the mirror device should see the same packets (that is, without outer header). Because vxlan tunnel sets dev->hard_header_len, tcf_mirred() resets mac header back to outer mac, the mirror device actually sees packets with outer headers Vxlan tunnel should set dev->needed_headroom instead of dev->hard_header_len, like what other ip tunnels do. This fixes the above problem. Cc: "David S. Miller" <davem@davemloft.net> Cc: stephen hemminger <stephen@networkplumber.org> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Dimitris Michailidis authored
Hari's been doing the patch submissions for a while now and he'll be taking over as maintainer. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
-
Andy Lutomirski authored
"make vdso_install" installs unstripped versions of the vdso objects for the benefit of the debugger. This was broken by checkin: 6f121e54 x86, vdso: Reimplement vdso.so preparation in build-time C The filenames are different now, so update the Makefile to cope. This still installs the 64-bit vdso as vdso64.so. We believe this will be okay, as the only known user is a patched gdb which is known to use build-ids, but if it turns out to be a problem we may have to add a link. Inspired by a patch from Sam Ravnborg. Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Tested-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/b10299edd8ba98d17e07dafcd895b8ecf4d99eff.1402586707.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@zytor.com>
-
Dan McLeran authored
This patch contains several fixes for Scsi START_STOP_UNIT. The previous code did not account for signed vs. unsigned arithmetic which resulted in an invalid lowest power state caculation when the device only supports 1 power state. The code for Power Condition == 2 (Idle) was not following the spec. The spec calls for setting the device to specific power states, depending upon Power Condition Modifier, without accounting for the number of power states supported by the device. The code for Power Condition == 3 (Standby) was using a hard-coded '0' which is replaced with the macro POWER_STATE_0. Signed-off-by:
Dan McLeran <daniel.mcleran@intel.com> Reviewed-by:
Vishal Verma <vishal.l.verma@linux.intel.com> Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com>
-
Eric Sandeen authored
fcebe456 cut and pasted some code to a later point in create_pending_snapshot(), but didn't switch to the appropriate error handling for this stage of the function. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Eric Sandeen authored
If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by:
-
Eric Sandeen authored
If tmp = ulist_alloc(GFP_NOFS) fails, we return without freeing the previously allocated qgroups = ulist_alloc(GFP_NOFS) and cause a memory leak. Signed-off-by:
-
Filipe Manana authored
Often when running the qgroups sanity test, a crash or a hang happened. This is because the extent buffer the test uses for the root node doesn't have an header level explicitly set, making it have a random level value. This is a problem when it's not zero for the btrfs_search_slot() calls the test ends up doing, resulting in crashes or hangs such as the following: [ 6454.127192] Btrfs loaded, debug=on, assert=on, integrity-checker=on (...) [ 6454.127760] BTRFS: selftest: Running qgroup tests [ 6454.127964] BTRFS: selftest: Running test_test_no_shared_qgroup [ 6454.127966] BTRFS: selftest: Qgroup basic add [ 6480.152005] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:5383] [ 6480.152005] Modules linked in: btrfs(+) xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc i2c_piix4 i2c_core pcspkr evbug psmouse serio_raw e1000 [last unloaded: btrfs] [ 6480.152005] irq event stamp: 188448 [ 6480.152005] hardirqs last enabled at (188447): [<ffffffff8168ef5c>] restore_args+0x0/0x30 [ 6480.152005] hardirqs last disabled at (188448): [<ffffffff81698e6a>] apic_timer_interrupt+0x6a/0x80 [ 6480.152005] softirqs last enabled at (188446): [<ffffffff810516cf>] __do_softirq+0x1cf/0x450 [ 6480.152005] softirqs last disabled at (188441): [<ffffffff81051c25>] irq_exit+0xb5/0xc0 [ 6480.152005] CPU: 0 PID: 5383 Comm: modprobe Not tainted 3.15.0-rc8-fdm-btrfs-next-33+ #4 [ 6480.152005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 6480.152005] task: ffff8802146125a0 ti: ffff8800d0d00000 task.ti: ffff8800d0d00000 [ 6480.152005] RIP: 0010:[<ffffffff81349a63>] [<ffffffff81349a63>] __write_lock_failed+0x13/0x20 [ 6480.152005] RSP: 0018:ffff8800d0d038e8 EFLAGS: 00000287 [ 6480.152005] RAX: 0000000000000000 RBX: ffffffff8168ef5c RCX: 000005deb8525852 [ 6480.152005] RDX: 0000000000000000 RSI: 0000000000001d45 RDI: ffff8802105000b8 [ 6480.152005] RBP: ffff8800d0d038e8 R08: fffffe12710f63db R09: ffffffffa03196fb [ 6480.152005] R10: ffff8802146125a0 R11: ffff880214612e28 R12: ffff8800d0d03858 [ 6480.152005] R13: 0000000000000000 R14: ffff8800d0d00000 R15: ffff8802146125a0 [ 6480.152005] FS: 00007f14ff804700(0000) GS:ffff880215e00000(0000) knlGS:0000000000000000 [ 6480.152005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6480.152005] CR2: 00007fff4df0dac8 CR3: 00000000d1796000 CR4: 00000000000006f0 [ 6480.152005] Stack: [ 6480.152005] ffff8800d0d03908 ffffffff810ae967 0000000000000001 ffff8802105000b8 [ 6480.152005] ffff8800d0d03938 ffffffff8168e57e ffffffffa0319c16 0000000000000007 [ 6480.152005] ffff880210500000 ffff880210500100 ffff8800d0d039b8 ffffffffa0319c16 [ 6480.152005] Call Trace: [ 6480.152005] [<ffffffff810ae967>] do_raw_write_lock+0x47/0xa0 [ 6480.152005] [<ffffffff8168e57e>] _raw_write_lock+0x5e/0x80 [ 6480.152005] [<ffffffffa0319c16>] ? btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa0319c16>] btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa02b2acb>] btrfs_lock_root_node+0x3b/0x50 [btrfs] [ 6480.152005] [<ffffffffa02b81a6>] btrfs_search_slot+0x916/0xa20 [btrfs] [ 6480.152005] [<ffffffff811a727f>] ? create_object+0x23f/0x300 [ 6480.152005] [<ffffffffa02b9958>] btrfs_insert_empty_items+0x78/0xd0 [btrfs] [ 6480.152005] [<ffffffffa036041a>] insert_normal_tree_ref.constprop.4+0xa2/0x19a [btrfs] [ 6480.152005] [<ffffffffa03605c3>] test_no_shared_qgroup+0xb1/0x1ca [btrfs] [ 6480.152005] [<ffffffff8108cad6>] ? local_clock+0x16/0x30 [ 6480.152005] [<ffffffffa035ef8e>] btrfs_test_qgroups+0x1ae/0x1d7 [btrfs] [ 6480.152005] [<ffffffffa03a69d2>] ? ftrace_define_fields_btrfs_space_reservation+0xfd/0xfd [btrfs] [ 6480.152005] [<ffffffffa03a6a86>] init_btrfs_fs+0xb4/0x153 [btrfs] [ 6480.152005] [<ffffffff81000352>] do_one_initcall+0x102/0x150 [ 6480.152005] [<ffffffff8103d223>] ? set_memory_nx+0x43/0x50 [ 6480.152005] [<ffffffff81682668>] ? set_section_ro_nx+0x6d/0x74 [ 6480.152005] [<ffffffff810d91cc>] load_module+0x1cdc/0x2630 (...) Therefore initialize the extent buffer as an empty leaf (level 0). Issue easy to reproduce when btrfs is built as a module via: $ for ((i = 1; i <= 1000000; i++)); do rmmod btrfs; modprobe btrfs; done Signed-off-by:Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Sasha Levin authored
Mark the dereference as protected by lock. Not doing so triggers an RCU warning since the radix tree assumed that RCU is in use. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Wang Shilong authored
Steps to reproduce: # mkfs.btrfs -f /dev/sd[b-f] -m raid5 -d raid5 # mkfs.ext4 /dev/sdc --->corrupt one of btrfs device # mount /dev/sdb /mnt -o degraded # btrfs scrub start -BRd /mnt This is because readahead would skip missing device, this is not true for RAID5/6, because REQ_GET_READ_MIRRORS return 1 for RAID5/6 block mapping. If expected data locates in missing device, readahead thread would not call __readahead_hook() which makes event @rc->elems=0 wait forever. Fix this problem by checking return value of btrfs_map_block(),we can only skip missing device safely if there are several mirrors. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Gerhard Heift authored
This new ioctl call allows the user to supply a buffer of varying size in which a tree search can store its results. This is much more flexible if you want to receive items which are larger than the current fixed buffer of 3992 bytes or if you want to fetch more items at once. Items larger than this buffer are for example some of the type EXTENT_CSUM. Signed-off-by:
Gerhard Heift <Gerhard@Heift.Name> Signed-off-by:
David Sterba <dsterba@suse.cz>
-
Matthew Wilcox authored
The nvme-scsi file defined its own Log Page constant. Use the newly-defined one from the header file instead. Signed-off-by: -
Matthew Wilcox authored
Taken from the 1.1a version of the spec Signed-off-by:
-
