The wireless core has removed the ssid variables, so also remove
them from the agnx driver so that it builds properly.

Cc: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This driver is for the Airgo AGNX00 wireless chip.

From: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This should make the driver use request_firmware() instead of a static
firmware.
Some obvious things are missing:
1) The unneeded header files are not removed yet. This is to keep the
   patch size small.
2) The .bin files are missing so the driver doesn't have what to load.
3) Testing. None of this was tested. It does compiles OK though :)
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix sizeof to use the right type
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch uses kzalloc() where really applicable.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

No argument named @regs in stub_complete(), remove it.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The 'pPacket' variable is assigned, but never used. Remove it.
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix build failure in et131x driver - missing \ in multiline macro

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch cleans up the et131x_debug.h defines as well as fix the
checkpatch warnings
Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that the v4l2 tree is merged with mainline, enable some of
the compiled out functions.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

small cleanup of go7007:

- prepare for urb->status conversion
- micro optimization
- use kzalloc
- fix free of memory in use in go7007_usb_disconnect
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Comment out some functions that we aren't using yet, in anticipation
of using them when the v4l core merges are changed upstream.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

They are treated as __le16 everywhere, annotate as such.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

go7007: Convert driver to use video_ioctl2

go7007 driver were using the old method of having a big switch for handling
ioctls. Use instead the new video_ioctl2 method.

This patch also adds support for the 2.6.19 new ioctls to enumberate video
formats and intervals.

Still lacking the implementation of compression ioctls needed on go7007.

This patch weren't tested, due to the lack of a hardware with me.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the driver for the Sensoray 2250/2251 USB devices added to
go7007 driver.
Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

- Added documentation including README files from the original go7007
  driver package.
- Added Video4Linux2 MPEG controls.
- Added Video4Linux2 audio ioctls, which pass thru to the i2c driver.
- Improved saa7134 interface, to pass thru controls and video settings.
- Fixed a bug in sony tuner, as reported by Bifferos on the Go7007 wiki.
Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Lindent drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove typedefs in drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update readme in drivers/staging/sxg

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove ugly 'Stop Comilation;' statement in sxghif, replace with an
error macro.

This should never be hit as we are only building for x86 boxes at the
moment.

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove typedefs in the sxg driver

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Lock only the portion of code that does register access.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Always set the user space offset from kernel space, to indicate group
transmitted/received.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Added Rx control register definition. Flush Rx FIFO on init, and set
continuous DMA mode.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Removed out printing of DMA address, that causes warnings during
build.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Unmap PCI bars on remove().
Validate sysfs values before using them.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Accurately calculate the no. of pages from the bytes.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update TODO list.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Block size is to be expressed in no. of 64 bit transfers. But the code
specifies the block size in bytes. Fix this issue.
Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

- no DMA on stack
- cleanup unclear endianness issue
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's now a "clean" driver.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 functions are now not used, remove them.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The previous patch broke the at76_usb driver due to some other
wireless core api changes.  This patch fixes the driver to build
properly again.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This updates drivers/staging/at76_usb to correspond with the latest
version previously available in wireless-testing.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

payload_length is unsigned, check before subtraction
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>

This fixes some compiler warnings in teh wlan-ng driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/staging/wlan-ng/p80211conv.c
  drivers/staging/wlan-ng/p80211req.c
  drivers/staging/wlan-ng/p80211wext.c
  drivers/staging/wlan-ng/prism2mgmt.c

This patch removes the said #include <version.h>.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

allow card to correctly receive network packets,
without this change all incoming packets are dropped.
code copied from the latest wlan-ng-devel tree.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>