Currently, all users of is module that use the default (*io) function
pass an 'iobase' to subdev_8255_init() of the form:

  dev->iobase + OFFSET_TO_8255_BASE_REG

Now that the (*io) callback includes the comedi_device 'dev' pointer
the 'dev->iobase' does not need to be included.

Modify the default (*io) function, subdev_8255_io(), to automatically
add the dev->iobase to the address when reading/writing the port.

For aesthetics, rename the subdevice private data member to 'regbase'.
Also, rename the local variables in this module that are used to
access this member.

Add a comment in dev_8255_attach() about the 'iobase' that is passed
to subdev_8255_init(). For manually attached 8255 devices the io
region is requested with __comedi_request_region() which does not
set dev->iobase. For these devices the 'regbase' is actually the
'iobase'.

Remove the, now unnecessary, dev->iobase from all the callers of
subdev_8255_init(). There are a couple drivers that only passed the
dev->iobase. For those drivers pass a 'regbase' of 0x00.

Note that the das16m1 driver is a bit goofy. The devpriv->extra_iobase
is requested using __comedi_request_region() which does not set the
dev->iobase. But the starting address passed is dev->iobase + DAS16M1_82C55
so a 'regbase' of DAS16M1_82C55 is passed to subdev_8255_init().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (i * 4).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (I8255_4020_REG).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (DIO_8255_OFFSET).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (dioP2ExpansionIO8Bit).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (DIO_BASE_REG).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (Port_A).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 8255 driver uses an (*io) callback to read/write the registers
of the 8255 device. The default callback provided by the driver uses
inb()/outb() calls to access to registers based on an 'iobase' that
was initialized during the subdev_8255_init() and a 'port' value.

The users of this module can optionally provide a custom (*io) callback
to handle the read/write in another manner.

Make the (*io) callback a bit more flexible by also passing the
comedi_device pointer as a parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 2 is saved in the private data as
'iobase1' and the address in PCI bar 3 is saved in the comedi_device
as the 'iobase'. The 'iobase' is the base address of the daq
registers (ai/ao) of the board. The 'iobase1' address is the base
address of the 8255, 8254, configuration, and interrupt registers.

Flip the saving of these base addresses. Save the address from PCI
bar 2 in the comedi_device 'iobase' and the address from PCI bar 3
in the private data as 'daqio'.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 3 is saved in the comedi_device as
the 'iobase' and the one in PCI bar 2 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Save the PCI bar 3 address in the private data as 'daqio' and the
address from PCI bar 2 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver uses three iobase addresses, found in PCI bars 2, 3, and 4.
Currently, the address in PCI bar 2 is saved in the comedi_device as
the 'iobase', the PCI bar 3 address is saved in the private data as
'BADR3' and the one in PCI bar 4 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Flip the saving of the PCI bar 2 and 4 base addresses. Save the address
from PCI bar 2 in the private data as the 'daqio' and the address from
PCI bar 4 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the base address of the 8254 and 8255 devices, found in
PCI bar 3, is saved in the private data as 'pacer_counter_dio'.
The 'iobase' in the comedi_device is currently unused.

Save the address from PCI bar 3 in the comedi_device and remove
the unnecessary member from the private data.

This will help with some cleanup of the 8255 module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This exported function just does a free_irq() to release the interrupt
handler for the legacy and PCI dio200 drivers.

The legacy driver also calls comedi_legacy_detach() which would also
do the free_irq(). For that driver the just use comedi_legacy_detach()
directly for the (*detach).

For the PCI driver, add the free_irq() to the private (*datach) function.

Remove the, then unused, dio200_common_detach() function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by amplc_dio200_common_attach() and it
can never fail. For aesthetics, absorb it into that function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is only set for the PCIE boards. Use the
'is_pcie' flag to determine if the offset needs to be shifted when
reading/writing the registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.

For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the switch (context_model).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function names provide enough description. The extra comments are not
necessary. Remove them.

Also, tidy up some of the function declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This struct is used to provide part of the boardinfo data. Using the extra
indirection does not provide any additional clarity to the driver.

Absorb the members from dio200_layout into dio200_board and remove the
extra 'layout' indirection.

For aesthetics, rename all the local variables used for the boardinfo
pointer to 'board'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to these declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit performs a final tidying of the register map defines, bringing
them to a state that is ready for merging into addi_apci_1564.c when the
time comes.  Actions performed include:

*Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used.
*Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE}
macros to shorter names which are more consistent with the digital input
interrupt macros.
*Fixes a typo in a comment (dev>iobase changed to dev->iobase).
*Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more
accurately reflect that they are only offsets to counter registers (since
only the counters are offset from dev->iobase).
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengraver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with commit 1496e596 ("staging: comedi: addi_apci_1564: use
addi_watchdog module to init watchdog subdevice"), this driver uses the
addi_watchdog module to provide support for the watchdog subdevice.  Any
remaining watchdog code in-driver can and should be removed.

This will also make future work on the timer and counter subdevices easier.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DO config function served the purpose of configuring the diagnostic
interrupts for the board.  As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the vendorspecificextn.c that fixes coding style
warning message line over 80 characters found by checkpatch.pl script.
I am submitting this patch as required by Eudyptula Challenge.
Signed-off-by: Ramesh Basukala <basukalaramesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix checkpatch.pl warning
Tested by compilation only.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes some unneeded code.
1) kzalloc() allocates 4 extra bytes so that we can align the return
   value.  But actually the return value is already aligned so we can
   remove the + 4 and the call to N_BYTE_ALIGMENT().
2) The memset() isn't needed because kzalloc() zeroes the allocation.
Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188e_IOL_exec_cmds_sync() is a unused function.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>