- 19 Mar, 2014 5 commits
-
-
Marcel Holtmann authored
In Secure Connections Only mode, it is required that Secure Connections is used for pairing and that the link key is encrypted with AES-CCM using a P-256 authenticated combination key. If this is not the case, then new connection shall be refused or existing connections shall be dropped. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
It is possible that pairing fails after we've already received remote identity information. One example of such a situation is when re-encryption using the LTK fails. In this case the hci_conn object has already been updated with the identity address but user space does not yet know about it (since we didn't notify it of the new IRK yet). To ensure user space doesn't get a Pair Device command response with an unknown address always use the same address in the response as was used for the original command. Signed-off-by:
-
Johan Hedberg authored
When performing SMP pairing with MITM protection one side needs to enter the passkey while the other side displays to the user what needs to be entered. Nowhere in the SMP specification does it say that the displaying side needs to any kind of confirmation of the passkey, even though a code comment in smp.c implies this. This patch removes the misleading comment and converts the code to use the passkey notification mgmt event instead of the passkey confirmation mgmt event. Signed-off-by:
-
Johan Hedberg authored
In some cases the current 250ms delay is not enough for the remote to receive the keys, as can be witnessed by the following log: > ACL Data RX: Handle 64 flags 0x02 dlen 21 [hci1] 231.414217 SMP: Signing Information (0x0a) len 16 Signature key: 555bb66b7ab3abc9d5c287c97fe6eb29 < ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci1] 231.414414 SMP: Encryption Information (0x06) len 16 Long term key: 2a7cdc233c9a4b1f3ed31dd9843fea29 < ACL Data TX: Handle 64 flags 0x00 dlen 15 [hci1] 231.414466 SMP: Master Identification (0x07) len 10 EDIV: 0xeccc Rand: 0x322e0ef50bd9308a < ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci1] 231.414505 SMP: Signing Information (0x0a) len 16 Signature key: bbda1b2076e2325aa66fbcdd5388f745 > HCI Event: Number of Completed Packets (0x13) plen 5 [hci1] 231.483130 Num handles: 1 Handle: 64 Count: 2 < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 [hci1] 231.664211 Handle: 64 Random number: 0x5052ad2b75fed54b Encrypted diversifier: 0xb7c2 Long term key: a336ede66711b49a84bde9b41426692e > HCI Event: Command Status (0x0f) plen 4 [hci1] 231.666937 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Number of Completed Packets (0x13) plen 5 [hci1] 231.712646 Num handles: 1 Handle: 64 Count: 1 > HCI Event: Disconnect Complete (0x05) plen 4 [hci1] 232.562587 Status: Success (0x00) Handle: 64 Reason: Remote User Terminated Connection (0x13) As can be seen, the last key (Signing Information) is sent at 231.414505 but the completed packets event for it comes only at 231.712646, i.e. roughly 298ms later. To have a better margin of error this patch increases the delay to 500ms. Signed-off-by: -
Johan Hedberg authored
This is a trivial coding style simplification by instead of having an extra early return to instead revert the if condition and do the single needed queue_work() call there. Signed-off-by:
-
- 18 Mar, 2014 3 commits
-
-
Johan Hedberg authored
The pairing process initiated through mgmt sets the conn->auth_type value regardless of BR/EDR or LE pairing. This value will contain the MITM flag if the local IO capability allows it. When sending the SMP pairing request we should check the value and ensure that the MITM bit gets correctly set in the bonding flags. Signed-off-by:
-
Johan Hedberg authored
The SMP specification is written with the assumption that both key information, plaintextData and encryptedData follow the same little endian byte ordering as the rest of SMP. Since the kernel crypto routines expect big endian data the code has had to do various byte swapping tricks to make the behavior as expected, however the swapping has been scattered all around the place. This patch centralizes the byte order swapping into the smp_e function by making its public interface match what the other SMP functions expect as per specification. The benefit is vastly simplified calls to smp_e. Signed-off-by:
-
Johan Hedberg authored
To make it possible to (correctly) pass data declared as const as the src parameter to the swap56 and swap128 functions declare this parameter also as const. Signed-off-by:
-
- 14 Mar, 2014 1 commit
-
-
Johan Hedberg authored
When performing pairing using SMP the remote may clear any key distribution bits it wants in its pairing response. We must therefore update our local variable accordingly, otherwise we might get stuck waiting for keys that will never come. Signed-off-by:
-
- 13 Mar, 2014 1 commit
-
-
Arnd Bergmann authored
Commit 97550887 "Bluetooth: make bluetooth 6lowpan as an option" ensures that 6LOWPAN_IPHC is turned on when we have BT_6LOWPAN enabled in Kconfig, but it allows building the IPHC code as a loadable module even if the entire Bluetooth stack is built-in, and that causes a link error. We can solve that by moving the 'select' statement into CONFIG_BT, which is a "tristate" option to enforce that 6LOWPAN_IPHC can only be a module if BT also is a module. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 12 Mar, 2014 1 commit
-
-
Joe Perches authored
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 11 Mar, 2014 3 commits
-
-
Andre Guedes authored
To avoid flooding the host with useless advertising reports during background scan, we enable the duplicates filter from controller. However, enabling duplicates filter requires a small change in background scan routine in order to fix the following scenario: 1) Background scan is running. 2) A device disconnects and starts advertising. 3) Before host gets the disconnect event, the advertising is reported to host. Since there is no pending LE connection at that time, nothing happens. 4) Host gets the disconnection event and adds a pending connection. 5) No advertising is reported (since controller is filtering) and the connection is never established. So, to address this scenario, we should always restart background scan to unsure we don't miss any advertising report (due to duplicates filter). Signed-off-by:Andre Guedes <andre.guedes@openbossa.org> Signed-off-by:
-
Andrew Earl authored
Add additional error case to attempt alternative configuration for SCO. Error occurs with Intel BT controller where fallback is not attempted as the error 0x20 Unsupported LMP Parameter value is not included in the list of errors where a retry should be attempted. The problem also affects PTS test case TC_HF_ACS_BV_05_I. See the HCI log below for details: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 5 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x20 handle 0 bdaddr 00:80:98:09:0B:19 type eSCO Error: Unsupported LMP Parameter Value < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 00:80:98:09:0B:19 type eSCO Air mode: CVSD See btmon log for further details: > HCI Event (0x0f) plen 4 [hci0] 44.888063 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event (0x1b) plen 3 [hci0] 44.893064 Handle: 256 Max slots: 1 > HCI Event (0x2c) plen 17 [hci0] 44.942080 Status: Unsupported LMP Parameter Value (0x20) Handle: 0 Address: 00:1B:DC:06:04:B0 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x01 RX packet length: 0 TX packet length: 0 Air mode: CVSD (0x02) > HCI Event (0x1b) plen 3 [hci0] 44.948054 Handle: 256 Max slots: 5 Signed-off-by:Andrew Earl <andrewx.earl@intel.com> Signed-off-by:
-
Alexander Aring authored
Currently you can have bluetooth 6lowpan without ipv6 enabled. This doesn't make any sense. With this patch you can disable/enable bluetooth 6lowpan support at compile time. The current bluetooth 6lowpan implementation doesn't check the return value of 6lowpan function. Nevertheless I added -EOPNOTSUPP as return value if 6lowpan bluetooth is disabled. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
- 10 Mar, 2014 1 commit
-
-
Marcel Holtmann authored
In case the pairable option has been disabled, the pairing procedure does not create keys for bonding. This means that these generated keys should not be stored persistently. For LTK and CSRK this is important to tell userspace to not store these new keys. They will be available for the lifetime of the device, but after the next power cycle they should not be used anymore. Inform userspace to actually store the keys persistently only if both sides request bonding. Signed-off-by:
-
- 09 Mar, 2014 1 commit
-
-
Marcel Holtmann authored
The connection signature resolving key (CSRK) is used for attribute protocol signed write procedures. This change generates a new local key during pairing and requests the peer key as well. Newly generated key and received key will be provided to userspace using the New Signature Resolving Key management event. The Master CSRK can be used for verification of remote signed write PDUs and the Slave CSRK can be used for sending signed write PDUs to the remote device. Signed-off-by:
-
- 07 Mar, 2014 3 commits
-
-
Gustavo Padovan authored
vtable's method alloc_skb() needs to return a ERR_PTR in case of err and not a NULL. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Peng Chen authored
The version is always in little endian format. This patch makes the driver work on both little and big endian CPUs. Signed-off-by:
Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by:
-
Johan Hedberg authored
The debug logs for reporting a discrepancy between the expected amount of keys and the actually received amount of keys got these value mixed up. This patch fixes the issue. Signed-off-by:
-
- 05 Mar, 2014 3 commits
-
-
Peng Chen authored
usb devices info: T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e005 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Valentin Ilie authored
Remove assignment in if-statements to be consistent with the coding style. Signed-off-by:
Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by:
-
Claudio Takahasi authored
This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by:Claudio Takahasi <claudio.takahasi@openbossa.org> Cc: stable@vger.kernel.org Signed-off-by:
-
- 04 Mar, 2014 1 commit
-
-
Michael Knudsen authored
When stopping BCSP/H5, stop the retransmission timer before proceeding to clean up packet queues. The previous code had a race condition where the timer could trigger after the packet lists and protocol structure had been removed which led to dereferencing NULL or use-after-free bugs. Signed-off-by:
Michael Knudsen <m.knudsen@samsung.com> Reported-by:
Kirill Tkhai <ktkhai@parallels.com> Signed-off-by:
-
- 28 Feb, 2014 17 commits
-
-
Johan Hedberg authored
The stop_scan_complete function was used as an intermediate step before doing the actual connection creation. Since we're using hci_request there's no reason to have this extra function around, i.e. we can simply put both HCI commands into the same request. The single task that the intermediate function had, i.e. indicating discovery as stopped is now taken care of by a new HCI_LE_SCAN_INTERRUPTED flag which allows us to do the discovery state update when the stop scan command completes. Signed-off-by:
-
Johan Hedberg authored
The discovery process has a timer for disabling scanning, however scanning might be disabled through other means too like the auto-connect process. We should therefore ensure that the timer is never active after sending a HCI command to disable scanning. There was some existing code in stop_scan_complete trying to avoid the timer when a connect request interrupts a discovery procedure, but the other way around was not covered. This patch covers both scenarios by canceling the timer as soon as we get a successful command complete for the disabling HCI command. Signed-off-by:
-
Johan Hedberg authored
Some devices may refuse to re-encrypt with the LTK if they haven't received all our keys yet. This patch adds a 250ms delay before attempting re-encryption with the LTK. Signed-off-by:
-
Johan Hedberg authored
It's not strictly speaking required to re-encrypt a link once we receive an LTK since the connection is already encrypted with the STK. However, re-encrypting with the LTK allows us to verify that we've received an LTK that actually works. This patch updates the SMP code to request encrypting with the LTK in case we're in master role and waits until the key refresh complete event before notifying user space of the distributed keys. A new flag is also added for the SMP context to ensure that we re-encryption only once in case of multiple calls to smp_distribute_keys. Signed-off-by:
-
Johan Hedberg authored
LE connection attempts do not have a controller side timeout in the same way as BR/EDR has (in form of the page timeout). Since we always do scanning before initiating connections the attempts are always expected to succeed in some reasonable time. This patch adds a timer which forces a cancellation of the connection attempt within 20 seconds if it has not been successful by then. This way we e.g. ensure that mgmt_pair_device times out eventually and gives an error response. Signed-off-by:
-
Johan Hedberg authored
This patch adds defines for the initiator filter policy parameter values of the HCI_LE_Create_Connection command. They will be used in a subsequent patch to check whether we should have a timeout for the connection attempt or not. Signed-off-by:
-
Johan Hedberg authored
Now that we have nicely tracked values of the initiator and responder address information we can pass that directly to the smp_c1 function without worrying e.g. about who initiated the connection. This patch updates the two places in smp.c to use the new variables. Signed-off-by:
-
Johan Hedberg authored
For SMP we need the local and remote addresses (and their types) that were used to establish the connection. These may be different from the Identity Addresses or even the current RPA. To guarantee that we have this information available and it is correct track these values separately from the very beginning of the connection. For outgoing connections we set the values as soon as we get a successful command status for HCI_LE_Create_Connection (for which the patch adds a command status handler function) and for incoming connections as soon as we get a LE Connection Complete HCI event. Signed-off-by:
-
Johan Hedberg authored
We shouldn't update the hci_conn state to BT_CONNECT until the moment that we're ready to send the initiating HCI command for it. If the connection has the BT_CONNECT state too early the code responsible for updating the local random address may incorrectly think there's a pending connection in progress and refuse to update the address. Signed-off-by:
-
Johan Hedberg authored
Different controllers behave differently when HCI_Set_Random_Address is called while they are advertising or have a HCI_LE_Create_Connection in progress. Some take the newly written address into use for the pending operation while others use the random address that we had at the time that the operation started. Due to this undefined behavior and for the fact that we want to reliably determine the initiator address of all connections for the sake of SMP it's best to simply prevent the random address update if we have these problematic operations in progress. This patch adds a set_random_addr() helper function for the use of hci_update_random_address which contains the necessary checks for advertising and ongoing LE connections. One extra thing we need to do is to clear the HCI_ADVERTISING flag in the enable_advertising() function before sending any commands. Since re-enabling advertising happens by calling first disable_advertising() and then enable_advertising() all while having the HCI_ADVERTISING flag set. Clearing the flag lets the set_random_addr() function know that it's safe to write a new address at least as far as advertising is concerned. Signed-off-by:
-
Johan Hedberg authored
If SMP fails we should not leave any keys (LTKs or IRKs) hanging around the internal lists. This patch adds the necessary code to smp_chan_destroy to remove any keys we may have in case of pairing failure. Signed-off-by:
-
Marcel Holtmann authored
The random numbers in Bluetooth Low Energy are 64-bit numbers and should also be little endian since the HCI specification is little endian. Change the whole Low Energy pairing to use __le64 instead of a byte array. Signed-off-by:
-
Johan Hedberg authored
If some of the cleanup commands caused by mgmt_set_powered(off) never complete we should still force the adapter to be powered down. This is rather easy to do since hdev->power_off is already a delayed work struct. This patch schedules this delayed work if at least one HCI command was sent by the cleanup procedure. Signed-off-by:
-
Johan Hedberg authored
When powering off and disconnecting devices we should also consider connections which have not yet reached the BT_CONNECTED state. They may not have a valid handle yet and simply sending a HCI_Disconnect will not work. This patch updates the code to either disconnect, cancel connection creation or reject incoming connection creation based on the current conn->state value as well as the link type in question. When the power off procedure results in canceling connection attempts instead of disconnecting connections we get a connection failed event instead of a disconnection event. Therefore, we also need to have extra code in the mgmt_connect_failed function to check if we should proceed with the power off or not. Signed-off-by:
-
Marcel Holtmann authored
When the LE white list gets changed via HCI commands make sure that the internal storage of the white list entries gets updated. Signed-off-by:
-
Marcel Holtmann authored
The current LE white list entries require storing in the HCI controller structure. So provide a storage and access functions for it. In addition export the current list via debugfs. Signed-off-by:
-
Marcel Holtmann authored
When starting up a controller make sure that all LE white list entries are cleared. Normally the HCI Reset takes care of this. This is just in case no HCI Reset has been executed. Signed-off-by:
-
