- 21 Jan, 2013 40 commits
-
-
Amos Kong authored
We want to send vq command to set mac address in virtnet_set_mac_address(), so do this function moving. Fixed a little issue of coding style. Signed-off-by:
Amos Kong <akong@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Dichtel says: ==================== The goal of this serie is to add the support of proxy multicast, ie being able to build a static multicast tree. In other words, it adds the support of (*,G) mf[6]c entries. v2: use INADDR_ANY instead of 0 for IPv4 addresses ==================== Signed-off-by: -
Nicolas Dichtel authored
This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
Nicolas Dichtel authored
This will ease further addition of new MRT[6]_* values and avoid to update in6.h each time. Note that we reduce the maximum value from 210 to 209, but 210 does not match any known value in ip[6]_mroute_setsockopt(). Signed-off-by:
-
Paul Gortmaker authored
The original intent of this file was to list limitations in drivers/hardware relating to multicast use, back when some modest hardware from the early 1990s did not support things we might take for granted today. I was intending to delete some now-gone MCA/token ring entries in this file, but once I opened it, I found it only contained information on the earliest (pre-2000) linux networking drivers. Checking the git history shows that the file hasn't been touched since 2005. Clearly nobody is actively consulting this file as a meaningful reference. Rather than add a "YES YES YES" line for all of the drivers we currently have, lets just take advantage of the fact that nobody is using the file to delete it. This has the side benefit of not having to do a line-by-line deletion of the file content as each older driver is expired. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
David S. Miller authored
Merge s390 networking changes from Frank Blaschka. Signed-off-by: -
Stefan Raspl authored
Commit 46d3ceab "tcp: TCP Small Queues" has severly degraded performance for single connection RR workloads on HiperSockets with MTU >=16K due to a conflict of the TCP Small Queues approach with our buffer scan threshold which releases buffers not frequently enough yet. This fix restores performance to the same level as before cited commit. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
As of now, s390dbf entries for the cards are discarded as soon as the device is removed. However, this will also bar us of all chances of getting valuable debug information after a device has been removed. This patch will keep the s390dbf entries around until the qeth module is removed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
Refer to virtual NICs instead of GuestLANs. Signed-off-by:
-
Stefan Raspl authored
The existing port isolation mode 'forward' will now verify that the adjacent switch port supports the required reflective relay (RR) mode. This patch adds the required error handling for the cases where enabling port isolation mode 'forward' can now fail. Furthermore, once established, we never fall back from one of the port isolation modes to a non-isolated mode without further user-interaction. This includes cases where the isolation mode was enabled successfully, but ceases to work e.g. due to configuration changes at the switch port. Finally, configuring an isolation mode with the device being offline will make onlining the device fail permanently upon errors encountered until either errors are resolved or the isolation mode is changed by the user to a different mode. Signed-off-by:
-
Stefan Raspl authored
Remove exports that are not used anywhere else. Signed-off-by:
-
Stefan Raspl authored
The previous code did never retry any idx setup unless retries were done for device offline/online at the beginning of the function. Signed-off-by:
-
David S. Miller authored
YOSHIFUJI Hideaki says: ==================== This series of changes basically clean up NDISC logic, especially on sender side. We originally do For NS/NA/RS: 1) build temporary ICMPv6 header 2) ndisc_build_skb() with temporary ICMPv6 header and rather criptic arguments. - Calculate total length and allocate sk_buff - Build IPv6 header. - copy ICMPv6 header, additional data and ND options. - Fill-in ICMPv6 checksum. Here, structures defined for message format was not used at all, it is difficult to understand what is being sent, and it was not generic. 3) __ndisc_send() - Allocate temporary dst. - Send it. Several issues: - We could not defer decision if we should/can send some ND option. - It is hard to see the packet format at a glance. - ICMPv6 header was built as temporary variable, and then copied to the buffer. - Some code path for Redirect was not shared. With these patches, we do: 1) Calculate (or estimate) message length and option length. 2) Allocate skb (via new ndisc_skb_alloc()). 3) Fill-in ICMPv6 message directly using compound literals. 4) Fill-in ICMPv6 checksum 5) Build IPv6 header (including length) 6) Send the packet (via ndisc_send_skb()). - allocate temporary dst and send it. - We can defer calculating real length of the packet. For example, we can give up filling some option at when filling in. - Message is built directly without temporary buffer. - Structures defined for message format is easier to understand what is being built. - NS/NA/RS/Redirect share same logic. - Reduced code/data size: text data bss dec hex filename 265407 14133 3488 283028 45194 old/net/ipv6/ipv6.o 264955 14109 3488 282552 44fb8 new/net/ipv6/ipv6.o ==================== Signed-off-by: -
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Construct NS/NA/RS message directly using C99 compound literals. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Reuse dst if one is attached with skb. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
skb_transport_header() (thus icmp6_hdr()) is available here, use it. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Build ICMPv6 message first and make buffer management easier; we can use skb->len when filling checksum in ICMPv6 header, and then build IP header with length field. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Since we have skb->dev, use it. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
- move ip6_nd_hdr() to its users' source files. In net/ipv6/mcast.c, it will be called ip6_mc_hdr(). - make return type to void since this function never fails. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Suggested by Eric Dumazet <edumazet@google.com>. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
This also makes ndisc_opt_addr_data() and ndisc_fill_addr_option() use ndisc_opt_addr_space(). Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Add pointer to struct net_device (dev) and remove data_len (= dev->addr_len) and addr_type (= dev->type). Signed-off-by:
-
Thierry Reding authored
The correct name of the transmit DMA channel field in struct emac_priv is txchan, not txch. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
It is wrong to set skb->ip_summed to CHECKSUM_UNNECESSARY unless the device has already checked it. Signed-off-by:
-
Ming Lei authored
This patch calls device_set_wakeup_enable() inside set_wol callback, so that turning on WOL from user mode utility can make the 'wakeup' of pegasus device to be enabled, then remote wakeup may be enabled before putting into sleep. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Eric Dumazet authored
remove redundant code from build_inline_wqe() Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-By:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by:
-
