Starting the conversion:
	* internal dev_t made 32bit.
	* new helpers - new_encode_dev(), new_decode_dev(), huge_encode_dev(),
huge_decode_dev(), new_valid_dev().  They do encoding/decoding of 32bit and
64bit values; for now huge_... are aliases for new_... and new_valid_dev()
is always true.  We do 12:20 for 32bit; representation is compatible with
16bit one - we have major in bits 19--8 and minor in 31--20,7--0.  That's
what the userland sees; internally we have (major << 20)|minor, of course.
	* MKDEV(), MAJOR() and MINOR() updated.
	* several places used to handle Missed'em'V dev_t (14:18 split)
manually; that stuff had been taken into common helpers.
	Now we can start replacing old_... with new_... and huge_..., depending
on the width available.  MKDEV() callers should (for now) make sure that major
and minor are within 12:20.  That's what the next chunk will do.

	Added old_encode_dev() to assorted stat() variants.
	Fixed bug in s390 emulation on s390x: stat64() should never truncate
UID and GID.
	Ditto for i386 emulation on x86_64.
	Replaced dev_t in various struct stat with explicit integer type.
	Replaced __kernel_dev_t with __old_kernel_dev_t in dm-ioctl-v1.h
	Now we are free to change dev_t in any way we want - on all boundaries
we have explicit conversions.
	Took __kernel_dev_t definition to linux/types.h and changed it with
__u16.  We are ready to proceed to 32bit now.

	Added old_encode_dev()/old_decode_dev() in CODA code - on assignments
to/from ->va_rdev.

	Added old_encode_dev() in loop.c

	Changed sys_mknod() prototype to have unsigned int passed to it
instead of current dev_t.  Added old_decode_dev() in sys_mknod() and
made sure that its callers are passing it old_encode_dev(<value>)
	Switched sys_ustat() and its variants from dev_t to unsigned (and
added old_decode_dev()).
	Took care of assignments to ROOT_DEV - again, old_decode_dev().
	Late-boot search in devfs (call sys_newstat() and compare with
st_rdev) also updated.

	Added old_encode_dev()/old_decode_dev() in dm-ioctl-*.c

	Minor cleanups in md.c + added old_decode_dev() on ioctl argument in
there.

	Minor cleanup of jffs2 fill_super.

	Added missing old_encode_dev() in JFS.

	NFS made dev_t-agnostic.  Aside of minor fixes in debugging printks,
and adding old_encode_dev()/old_decode_dev(), the main part is in handling
of exports with large dev_t.  New fhandle format introduced, fh_verify(),
fh_compose() and exports cache taught to deal with it.  Format is used when
->s_dev of exported fs doesn't fit into 256:256; in that case we put major
and minor in separate words in fhandle; ->fh_fsid_type is set to 2.

	tty->device had been used only in a couple of places and can be
calculated by tty->index and tty->driver.  Field removed, its users switched
to static inline dev_t tty_devnum(tty).

	sanitized dev_t use in debugging printks in XFS, switched their
bhash to use of struct block_device, added old_encode_dev() in XFS statfs()
(it had stored dev_t in ->fs_id[0])

	added old_encode_dev() in drm debugging printks, so they won't change
when we go for bigger dev_t.

	fs/reiserfs/procfs.c made sane.  It used to store dev_t of filesystem
in the proc_dir_entry->data (which is void *) and played very odd games after
that.
	Switched to seq_file, stores pointer to superblock, uses sget() to
validate it, avoids use of dev_t completely.

K8 can run with a 32bit kernel too.  If that's the case we have to tell
user space about it.  Remove the unneeded ifdef.

In that case the CPU is called "x86-64/hammer" even on 32bit.  This is
not strictly true on i386, but it's the named used by the current
oprofile user space for K8 performance counters and it would complicate
things to use different names between 32bit and 64bit.

 - Fix -funit-at-a-time compilation and enable it when possible
 - Remove -finline-limit as it should not be needed anymore.
 - Update defconfig
 - Fix Makefile bug that caused a recompilation of vsyscall.so on
   every make (thanks to Sam Ravnborg)
 - Add beginning of asm/dwarf2.h to support assembler CFI directives
   (not complete yet)
 - Remove old PDAREF macro from entry.S
 - Remove clever and buggy code in sys_ioperm/set_bitmap and replace it
   by simple and working code
 - Don't make acpi_disabled __initdata.  It is referenced after boot.
 - Fix TLB size reporting in /proc/cpuinfo
 - Cleanup oops printing a bit
 - Add "executive summary" at end of oopses
 - Reenable interrupts on oopses before calling do_exit
 - Remove some unneeded prefetches.  Just two are enough to kickstart
   the hardware prefetcher.
 - Add prefetch workaround (based on code from Richard Brunner)
 - Clean up signal checking in do_page_fault
 - Don't allow modify_ldt to set 64bit codesegments
 - Readd SIGEV_PAD_SIZE (Stephen Rothwell)
 - Add some likelys to uaccess.h (idea from Manfred Spraul)

into samba.org:/home/paulus/kernel/for-linus-ppc

into samba.org:/home/paulus/kernel/for-linus-ppc

Support an arbitrary number of target parameters.  [Alasdair Kergon]

Fix error message when linear targets gets handed more than 2 arguments.
[Alasdair Kergon]

dev_wait was meant to return table status not dev status.  [Alasdair Kergon]

Move retrieve_status up so dev_wait() can use it.

When multiple load ioctls are issued the reference count on older
'new_tables' wasn't being dropped.  [Christophe Saout]

Use the format_dev_t function for target status functions.

From: "William A.(Andy) Adamson" <andros@citi.umich.edu>

This implments the LOCKU operation.  These all pass the connectathon
lock test suite against the solaris nfsv4 client.

From: "William A.(Andy) Adamson" <andros@citi.umich.edu>

This implements the LOCKT operation.

From: "William A.(Andy) Adamson" <andros@citi.umich.edu>

This implements the nfsv4 LOCK operation.

From: "William A.(Andy) Adamson" <andros@citi.umich.edu>

This renames some structures and functions that can be used for
byte-range locking as well as for the exiting open share locks, and does
some cleanup.

This implements the idempotent replay cache need for NFSv4 OPEN state.
each state owner (open owner or lock owner) is required to store the
last sequence number mutating operation, and retransmit it when replayed
sequence number is presented for the operation.

I've implemented the cache as a static buffer of size 112 bytes
(NFSD4_REPLAY_ISIZE) which is large enough to hold the OPEN, the largest
of the sequence mutation operations.  This implements the cache for
OPEN, OPEN_CONFIRM, OPEN_DOWNGRADE, and CLOSE.  LOCK and UNLOCK will be
added when byte-range locking is done (soon!).

There is a warning because of calling return with an argument on a void
function.  The root cause is putting a return statement in a macro (evil
side effect).

Change ENCODE_SEQID_OP_TAIL to be a more proper macro, change all
calling functions to return void.

From: Trond Myklebust <trond.myklebust@fys.uio.no>

... see the code in ip_sockglue.c + the macros in socket.h....
AFAICS the control messages have wierd alignment requirements.

Silly typo.

From: Rusty Russell <rusty@rustcorp.com.au>

Also revert to md_fail_request before stopping an array.

The ->stop method can never fail, so there is not point checking it.

into home.osdl.org:/home/torvalds/v2.5/linux

Found by checker (David Yu Chen @Stanford)

into kroah.com:/home/greg/linux/BK/i2c-2.6

> That's what you are going to have to set the name file to in the
> i2c_client structure, much like your patch did.  Then look at the
> different name files in each device directory to see what kind of device
> it is (chip, subclient, etc.)

OK attached patch sets all names to just chip name for chips themselves and
"chipname subclient" when subclient ios registered.