Skip to content

L
linux
Switch branch/tag
  1. 13 Mar, 2019 24 commits
  3. 10 Mar, 2019 16 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.28 · 6a31767f
      Greg Kroah-Hartman authored
      6a31767f
    • Daniel Borkmann's avatar
      bpf: fix sanitation rewrite in case of non-pointers · ca490a98
      Daniel Borkmann authored 
      commit 3612af78 upstream.

Marek reported that he saw an issue with the below snippet in that
timing measurements where off when loaded as unpriv while results
were reasonable when loaded as privileged:

    [...]
    uint64_t a = bpf_ktime_get_ns();
    uint64_t b = bpf_ktime_get_ns();
    uint64_t delta = b - a;
    if ((int64_t)delta > 0) {
    [...]

Turns out there is a bug where a corner case is missing in the fix
d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar
type from different paths"), namely fixup_bpf_calls() only checks
whether aux has a non-zero alu_state, but it also needs to test for
the case of BPF_ALU_NON_POINTER since in both occasions we need to
skip the masking rewrite (as there is nothing to mask).

Fixes: d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
Reported-by: default avatarMarek Majkowski <marek@cloudflare.com>
Reported-by: default avatarArthur Fabre <afabre@cloudflare.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/Acked-by: default avatarSong Liu <songliubraving@fb.com>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ca490a98
    • Martin Wilck's avatar
      scsi: core: reset host byte in DID_NEXUS_FAILURE case · ebfb07e8
      Martin Wilck authored 
      commit 4a067cf8 upstream.

Up to 4.12, __scsi_error_from_host_byte() would reset the host byte to
DID_OK for various cases including DID_NEXUS_FAILURE.  Commit
2a842aca ("block: introduce new block status code type") replaced this
function with scsi_result_to_blk_status() and removed the host-byte
resetting code for the DID_NEXUS_FAILURE case.  As the line
set_host_byte(cmd, DID_OK) was preserved for the other cases, I suppose
this was an editing mistake.

The fact that the host byte remains set after 4.13 is causing problems with
the sg_persist tool, which now returns success rather then exit status 24
when a RESERVATION CONFLICT error is encountered.

Fixes: 2a842aca "block: introduce new block status code type"
Signed-off-by: default avatarMartin Wilck <mwilck@suse.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ebfb07e8
    • YueHaibing's avatar
      exec: Fix mem leak in kernel_read_file · b60d90b2
      YueHaibing authored 
      commit f612acfa upstream.

syzkaller report this:
BUG: memory leak
unreferenced object 0xffffc9000488d000 (size 9195520):
  comm "syz-executor.0", pid 2752, jiffies 4294787496 (age 18.757s)
  hex dump (first 32 bytes):
    ff ff ff ff ff ff ff ff a8 00 00 00 01 00 00 00  ................
    02 00 00 00 00 00 00 00 80 a1 7a c1 ff ff ff ff  ..........z.....
  backtrace:
    [<000000000863775c>] __vmalloc_node mm/vmalloc.c:1795 [inline]
    [<000000000863775c>] __vmalloc_node_flags mm/vmalloc.c:1809 [inline]
    [<000000000863775c>] vmalloc+0x8c/0xb0 mm/vmalloc.c:1831
    [<000000003f668111>] kernel_read_file+0x58f/0x7d0 fs/exec.c:924
    [<000000002385813f>] kernel_read_file_from_fd+0x49/0x80 fs/exec.c:993
    [<0000000011953ff1>] __do_sys_finit_module+0x13b/0x2a0 kernel/module.c:3895
    [<000000006f58491f>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
    [<00000000ee78baf4>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<00000000241f889b>] 0xffffffffffffffff

It should goto 'out_free' lable to free allocated buf while kernel_read
fails.

Fixes: 39d637af ("vfs: forbid write access when reading a file into memory")
Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Cc: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b60d90b2
    • Matthias Kaehlcke's avatar
      Bluetooth: Fix locking in bt_accept_enqueue() for BH context · 8d368fc5
      Matthias Kaehlcke authored 
      commit c4f5627f upstream.

With commit e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket
atomically") lock_sock[_nested]() is used to acquire the socket lock
before manipulating the socket. lock_sock[_nested]() may block, which
is problematic since bt_accept_enqueue() can be called in bottom half
context (e.g. from rfcomm_connect_ind()):

[<ffffff80080d81ec>] __might_sleep+0x4c/0x80
[<ffffff800876c7b0>] lock_sock_nested+0x24/0x58
[<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth]
[<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm]

Add a parameter to bt_accept_enqueue() to indicate whether the
function is called from BH context, and acquire the socket lock
with bh_lock_sock_nested() if that's the case.

Also adapt all callers of bt_accept_enqueue() to pass the new
parameter:

- l2cap_sock_new_connection_cb()
  - uses lock_sock() to lock the parent socket => process context

- rfcomm_connect_ind()
  - acquires the parent socket lock with bh_lock_sock() => BH
    context

- __sco_chan_add()
  - called from sco_chan_add(), which is called from sco_connect().
    parent is NULL, hence bt_accept_enqueue() isn't called in this
    code path and we can ignore it
  - also called from sco_conn_ready(). uses bh_lock_sock() to acquire
    the parent lock => BH context

Fixes: e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket atomically")
Signed-off-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8d368fc5
    • Kai-Heng Feng's avatar
      Bluetooth: btrtl: Restore old logic to assume firmware is already loaded · 43593a30
      Kai-Heng Feng authored 
      commit 00df214b upstream.

Realtek bluetooth may not work after reboot:
[   12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008

This is a regression introduced by commit 26503ad2 ("Bluetooth:
btrtl: split the device initialization into smaller parts"). The new
logic errors out early when no matching IC info can be found, in this
case it means the firmware is already loaded.

So let's assume the firmware is already loaded when we can't find
matching IC info, like the old logic did.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921
Fixes: 26503ad2 ("Bluetooth: btrtl: split the device initialization into smaller parts")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      43593a30
    • Luis Chamberlain's avatar
      selftests: firmware: fix verify_reqs() return value · cd61d473
      Luis Chamberlain authored 
      commit 344c0152 upstream.

commit a6a9be92 ("selftests: firmware: return Kselftest Skip code
for skipped tests") by Shuah modified failures to return the special
error code of $ksft_skip (4). We have a corner case issue where we
*do* want to verify_reqs().

Cc: <stable@vger.kernel.org> # >= 4.18
Fixes: a6a9be92 ("selftests: firmware: return Kselftest Skip code for for skipped tests")
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cd61d473
    • Karoly Pados's avatar
      USB: serial: cp210x: fix GPIO in autosuspend · 9765ec7f
      Karoly Pados authored 
      commit 7b0b644b upstream.

Current GPIO code in cp210x fails to take USB autosuspend into account,
making it practically impossible to use GPIOs with autosuspend enabled
without user configuration. Fix this like for ftdi_sio in a previous patch.
Tested on a CP2102N.
Signed-off-by: default avatarKaroly Pados <pados@pados.hu>
Fixes: cf5276ce ("USB: serial: cp210x: Adding GPIO support for CP2105")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9765ec7f
    • Johan Hovold's avatar
      gnss: sirf: fix premature wakeup interrupt enable · 09675c2f
      Johan Hovold authored 
      commit 82f844c2 upstream.

Make sure the receiver is powered (and booted) before enabling the
wakeup interrupt to avoid spurious interrupts due to a floating input.

Similarly, disable the interrupt before powering off on probe errors and
on unbind.

Fixes: d2efbbd1 ("gnss: add driver for sirfstar-based receivers")
Cc: stable <stable@vger.kernel.org>	# 4.19
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      09675c2f
    • Max Filippov's avatar
      xtensa: fix get_wchan · c426de69
      Max Filippov authored 
      commit d90b88fd upstream.

Stack unwinding is implemented incorrectly in xtensa get_wchan: instead
of extracting a0 and a1 registers from the spill location under the
stack pointer it extracts a word pointed to by the stack pointer and
subtracts 4 or 3 from it.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c426de69
    • Bart Van Assche's avatar
      aio: Fix locking in aio_poll() · f5e66cdb
      Bart Van Assche authored 
      commit d3d6a18d upstream.

wake_up_locked() may but does not have to be called with interrupts
disabled. Since the fuse filesystem calls wake_up_locked() without
disabling interrupts aio_poll_wake() may be called with interrupts
enabled. Since the kioctx.ctx_lock may be acquired from IRQ context,
all code that acquires that lock from thread context must disable
interrupts. Hence change the spin_trylock() call in aio_poll_wake()
into a spin_trylock_irqsave() call. This patch fixes the following
lockdep complaint:

=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.0.0-rc4-next-20190131 #23 Not tainted
-----------------------------------------------------
syz-executor2/13779 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000098ac1230 (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:329 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1772 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: __io_submit_one fs/aio.c:1875 [inline]
0000000098ac1230 (&fiq->waitq){+.+.}, at: io_submit_one+0xedf/0x1cf0 fs/aio.c:1908

and this task is already holding:
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908
which would create a new lock dependency:
 (&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}

but this new dependency connects a SOFTIRQ-irq-safe lock:
 (&(&ctx->ctx_lock)->rlock){..-.}

... which became SOFTIRQ-irq-safe at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
  __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
  _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
  spin_lock_irq include/linux/spinlock.h:354 [inline]
  free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
  percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
  percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
  percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
  percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
  __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
  rcu_do_batch kernel/rcu/tree.c:2486 [inline]
  invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
  rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
  __do_softirq+0x266/0x95a kernel/softirq.c:292
  run_ksoftirqd kernel/softirq.c:654 [inline]
  run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
  smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
  kthread+0x357/0x430 kernel/kthread.c:247
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

to a SOFTIRQ-irq-unsafe lock:
 (&fiq->waitq){+.+.}

... which became SOFTIRQ-irq-unsafe at:
...
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
  spin_lock include/linux/spinlock.h:329 [inline]
  flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
  fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
  fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
  fuse_send_init fs/fuse/inode.c:989 [inline]
  fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
  mount_nodev+0x68/0x110 fs/super.c:1392
  fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
  legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
  vfs_get_tree+0x123/0x450 fs/super.c:1481
  do_new_mount fs/namespace.c:2610 [inline]
  do_mount+0x1436/0x2c40 fs/namespace.c:2932
  ksys_mount+0xdb/0x150 fs/namespace.c:3148
  __do_sys_mount fs/namespace.c:3162 [inline]
  __se_sys_mount fs/namespace.c:3159 [inline]
  __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
  do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&fiq->waitq);
                               local_irq_disable();
                               lock(&(&ctx->ctx_lock)->rlock);
                               lock(&fiq->waitq);
  <Interrupt>
    lock(&(&ctx->ctx_lock)->rlock);

 *** DEADLOCK ***

1 lock held by syz-executor2/13779:
 #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline]
 #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline]
 #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline]
 #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908

the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&(&ctx->ctx_lock)->rlock){..-.} {
   IN-SOFTIRQ-W at:
                    lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
                    __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
                    _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
                    spin_lock_irq include/linux/spinlock.h:354 [inline]
                    free_ioctx_users+0x2d/0x4a0 fs/aio.c:610
                    percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline]
                    percpu_ref_put include/linux/percpu-refcount.h:301 [inline]
                    percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline]
                    percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158
                    __rcu_reclaim kernel/rcu/rcu.h:240 [inline]
                    rcu_do_batch kernel/rcu/tree.c:2486 [inline]
                    invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline]
                    rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780
                    __do_softirq+0x266/0x95a kernel/softirq.c:292
                    run_ksoftirqd kernel/softirq.c:654 [inline]
                    run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646
                    smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164
                    kthread+0x357/0x430 kernel/kthread.c:247
                    ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
   INITIAL USE at:
                   lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
                   __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline]
                   _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160
                   spin_lock_irq include/linux/spinlock.h:354 [inline]
                   __do_sys_io_cancel fs/aio.c:2052 [inline]
                   __se_sys_io_cancel fs/aio.c:2035 [inline]
                   __x64_sys_io_cancel+0xd5/0x5a0 fs/aio.c:2035
                   do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
                   entry_SYSCALL_64_after_hwframe+0x49/0xbe
 }
 ... key      at: [<ffffffff8a574140>] __key.52370+0x0/0x40
 ... acquired at:
   lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
   __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
   _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
   spin_lock include/linux/spinlock.h:329 [inline]
   aio_poll fs/aio.c:1772 [inline]
   __io_submit_one fs/aio.c:1875 [inline]
   io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
   __do_sys_io_submit fs/aio.c:1953 [inline]
   __se_sys_io_submit fs/aio.c:1923 [inline]
   __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
   do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

the dependencies between the lock to be acquired
 and SOFTIRQ-irq-unsafe lock:
-> (&fiq->waitq){+.+.} {
   HARDIRQ-ON-W at:
                    lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
                    __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
                    _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
                    spin_lock include/linux/spinlock.h:329 [inline]
                    flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
                    fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
                    fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
                    fuse_send_init fs/fuse/inode.c:989 [inline]
                    fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
                    mount_nodev+0x68/0x110 fs/super.c:1392
                    fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
                    legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
                    vfs_get_tree+0x123/0x450 fs/super.c:1481
                    do_new_mount fs/namespace.c:2610 [inline]
                    do_mount+0x1436/0x2c40 fs/namespace.c:2932
                    ksys_mount+0xdb/0x150 fs/namespace.c:3148
                    __do_sys_mount fs/namespace.c:3162 [inline]
                    __se_sys_mount fs/namespace.c:3159 [inline]
                    __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
                    do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
   SOFTIRQ-ON-W at:
                    lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
                    __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
                    _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
                    spin_lock include/linux/spinlock.h:329 [inline]
                    flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
                    fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
                    fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
                    fuse_send_init fs/fuse/inode.c:989 [inline]
                    fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
                    mount_nodev+0x68/0x110 fs/super.c:1392
                    fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
                    legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
                    vfs_get_tree+0x123/0x450 fs/super.c:1481
                    do_new_mount fs/namespace.c:2610 [inline]
                    do_mount+0x1436/0x2c40 fs/namespace.c:2932
                    ksys_mount+0xdb/0x150 fs/namespace.c:3148
                    __do_sys_mount fs/namespace.c:3162 [inline]
                    __se_sys_mount fs/namespace.c:3159 [inline]
                    __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
                    do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
   INITIAL USE at:
                   lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
                   __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
                   _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
                   spin_lock include/linux/spinlock.h:329 [inline]
                   flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415
                   fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676
                   fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687
                   fuse_send_init fs/fuse/inode.c:989 [inline]
                   fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214
                   mount_nodev+0x68/0x110 fs/super.c:1392
                   fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239
                   legacy_get_tree+0xf2/0x200 fs/fs_context.c:590
                   vfs_get_tree+0x123/0x450 fs/super.c:1481
                   do_new_mount fs/namespace.c:2610 [inline]
                   do_mount+0x1436/0x2c40 fs/namespace.c:2932
                   ksys_mount+0xdb/0x150 fs/namespace.c:3148
                   __do_sys_mount fs/namespace.c:3162 [inline]
                   __se_sys_mount fs/namespace.c:3159 [inline]
                   __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159
                   do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
                   entry_SYSCALL_64_after_hwframe+0x49/0xbe
 }
 ... key      at: [<ffffffff8a60dec0>] __key.43450+0x0/0x40
 ... acquired at:
   lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
   __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
   _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
   spin_lock include/linux/spinlock.h:329 [inline]
   aio_poll fs/aio.c:1772 [inline]
   __io_submit_one fs/aio.c:1875 [inline]
   io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
   __do_sys_io_submit fs/aio.c:1953 [inline]
   __se_sys_io_submit fs/aio.c:1923 [inline]
   __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
   do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

stack backtrace:
CPU: 0 PID: 13779 Comm: syz-executor2 Not tainted 5.0.0-rc4-next-20190131 #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_bad_irq_dependency kernel/locking/lockdep.c:1573 [inline]
 check_usage.cold+0x60f/0x940 kernel/locking/lockdep.c:1605
 check_irq_usage kernel/locking/lockdep.c:1650 [inline]
 check_prev_add_irq kernel/locking/lockdep_states.h:8 [inline]
 check_prev_add kernel/locking/lockdep.c:1860 [inline]
 check_prevs_add kernel/locking/lockdep.c:1968 [inline]
 validate_chain kernel/locking/lockdep.c:2339 [inline]
 __lock_acquire+0x1f12/0x4790 kernel/locking/lockdep.c:3320
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:329 [inline]
 aio_poll fs/aio.c:1772 [inline]
 __io_submit_one fs/aio.c:1875 [inline]
 io_submit_one+0xedf/0x1cf0 fs/aio.c:1908
 __do_sys_io_submit fs/aio.c:1953 [inline]
 __se_sys_io_submit fs/aio.c:1923 [inline]
 __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Fixes: e8693bcf ("aio: allow direct aio poll comletions for keyed wakeups") # v4.19
Signed-off-by: default avatarMiklos Szeredi <miklos@szeredi.hu>
[ bvanassche: added a comment ]
Reluctantly-Acked-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f5e66cdb
    • Liu Xiang's avatar
      MIPS: irq: Allocate accurate order pages for irq stack · 88793c03
      Liu Xiang authored 
      commit 72faa7a7 upstream.

The irq_pages is the number of pages for irq stack, but not the
order which is needed by __get_free_pages().
We can use get_order() to calculate the accurate order.
Signed-off-by: default avatarLiu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Fixes: fe8bd18f ("MIPS: Introduce irq_stack")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      88793c03
    • Gustavo A. R. Silva's avatar
      applicom: Fix potential Spectre v1 vulnerabilities · 5691b93f
      Gustavo A. R. Silva authored 
      commit d7ac3c6e upstream.

IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)

Fix this by sanitizing IndexCard before using it to index apbs.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5691b93f
    • Balaji Manoharan's avatar
      usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI · 9d53e36c
      Balaji Manoharan authored 
      commit 8fde481e upstream.

This fix enables USB role feature on intel commercial nuc
platform which is based on Kabylake chipset.
Signed-off-by: default avatarBalaji Manoharan <m.balaji@intel.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9d53e36c
    • Pavel Tikhomirov's avatar
      tracing: Fix event filters and triggers to handle negative numbers · 690e939d
      Pavel Tikhomirov authored 
      commit 6a072128 upstream.

Then tracing syscall exit event it is extremely useful to filter exit
codes equal to some negative value, to react only to required errors.
But negative numbers does not work:

[root@snorch sys_exit_read]# echo "ret == -1" > filter
bash: echo: write error: Invalid argument
[root@snorch sys_exit_read]# cat filter
ret == -1
        ^
parse_error: Invalid value (did you forget quotes)?

Similar thing happens when setting triggers.

These is a regression in v4.17 introduced by the commit mentioned below,
testing without these commit shows no problem with negative numbers.

Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com

Cc: stable@vger.kernel.org
Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: default avatarPavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      690e939d
    • Kirill A. Shutemov's avatar
      x86/boot/compressed/64: Do not read legacy ROM on EFI system · 51c53180
      Kirill A. Shutemov authored 
      commit 6f913de3 upstream.

EFI systems do not necessarily provide a legacy ROM. If the ROM is missing
the memory is not mapped at all.

Trying to dereference values in the legacy ROM area leads to a crash on
Macbook Pro.

Only look for values in the legacy ROM area for non-EFI system.

Fixes: 3548e131 ("x86/boot/compressed/64: Find a place for 32-bit trampoline")
Reported-by: default avatarPitam Mitra <pitamm@gmail.com>
Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Tested-by: default avatarBockjoo Kim <bockjoo@phys.ufl.edu>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190219075224.35058-1-kirill.shutemov@linux.intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202351Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      51c53180
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7