- 17 Jun, 2020 1 commit
-
-
Pierre-Louis Bossart authored
We already have two configurations for CometLake, and a third one coming. On other platforms, we used a single Kconfig option, so we should follow the same trend by merging the two cases in a backwards compatible way. The backwards compatibility is handled by overloading the COMETLAKE_LP kconfig as COMETLAKE. In practice we've never seen a case where COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one of the two is enough. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 16 Jun, 2020 1 commit
-
-
Shengjiu Wang authored
For mono channel, SSI will switch to Normal mode. In Normal mode and Network mode, the Word Length Control bits control the word length divider in clock generator, which is different with I2S Master mode (the word length is fixed to 32bit), it should be the value of params_width(hw_params). The condition "slots == 2" is not good for I2S Master mode, because for Network mode and Normal mode, the slots can also be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) to check if it is I2S Master mode. So we refine the formula for mono channel, otherwise there will be sound issue for S24_LE. Fixes: b0a7043d ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.comSigned-off-by:
-
- 15 Jun, 2020 9 commits
-
-
Mark Brown authored
Merge series "ASoC: topology: fix use-after-free when removing components" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset fixes a memory allocation issue and removes a 100% reproducible use-after-free report thrown by KASAN in automated module removal tests across multiple platforms. All the credit goes to Bard Liao for root-causing the issue. DAIs may be registered at the same time as a component, or when the topology is loaded. This two-step registration causes the memory for topology-based DAIs to allocated last, and conversely to be released first by devres, before the component is released and the DAIs removed from the component DAI list with snd_soc_unregister_dais(). When we remove a component, by the time we walk through its dai list to unregister all dais, the dais allocated by the topology have been freed already by devres and the list is corrupted with pointers that are no longer valid. The suggestion is to add an explicit devm_ based registration for topology-based dais, so that each dai is cleanly removed from the component dai list in the release operation before devres releases the allocated memory. Pierre-Louis Bossart (2): ASoC: soc-devres: add devm_snd_soc_register_dai() ASoC: soc-topology: use devm_snd_soc_register_dai() include/sound/soc.h | 4 ++++ sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++ sound/soc/soc-topology.c | 3 +-- 3 files changed, 42 insertions(+), 2 deletions(-) -- 2.20.1
-
Brent Lu authored
Port commit 6d011d50 ("ALSA: hda: Clear RIRB status before reading WP") from legacy HDA driver to fix the get response timeout issue. Current SOF driver does not suffer from this issue because sync write is enabled in hda_init. The issue will come back if the sync write is disabled for some reason. Signed-off-by:
Brent Lu <brent.lu@intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Jack Yu authored
Update rt1015 default register value according to spec modification. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200615032433.31061-1-jack.yu@realtek.comSigned-off-by:
-
Srinivas Kandagatla authored
Currently both FE and BE dai-links are configured bi-directional, However the DSP BE dais are only single directional, so set the directions as supported by the BE dais. Fixes: c25e295c (ASoC: qcom: Add support to parse common audio device nodes) Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
This patch adds support to q6afe_is_rx_port() to get direction of DSP BE dai port, this is useful for setting dailink directions correctly. Fixes: c25e295c (ASoC: qcom: Add support to parse common audio device nodes) Reported-by:
-
Pierre-Louis Bossart authored
soc_dpcm_fe_runtime_update() is called for all dailinks, and we want to first discard all back-ends, then deal with front-ends. The existing code first reports an error with multi-cpu front-ends, and that check needs to be moved after we know that we are dealing with a front-end. Fixes: 6e1276a5 ('ASoC: Return error if the function does not support multi-cpu') Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> BugLink: https://github.com/thesofproject/linux/issues/1970 Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
derek.fang authored
According to ideal rt5682 CCF, the root clk is mclk. But in some platforms, mclk is not exported to CCF. In this condition, rt5682_register_dai_clks will not be called. This patch lets dai clks could be registered whether mclk exists or not. Signed-off-by:
derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.comSigned-off-by:
-
Pierre-Louis Bossart authored
Use devm_ to avoid use-after-free KASAN reports and simplify error handling. Signed-off-by:
-
Pierre-Louis Bossart authored
The registration of DAIs may be done at two distinct times, once during a component registration and later when loading a topology. Since devm_ managed resources are freed in the reverse order they were allocated, when a component starts unregistering DAIs by walking through the DAI list, the memory allocated for the topology-registered DAIs was freed already, which leads to 100% reproducible KASAN use-after-free reports. This patch suggests a new devm_ function to force the DAI list to be updated prior to freeing the memory chunks referenced by the list pointers. Suggested-by:
-
- 12 Jun, 2020 4 commits
-
-
Shengjiu Wang authored
With EDMA, there is two dma channels can be used for dev_to_dev, one is from ASRC, one is from another peripheral (ESAI or SAI). If we select the dma channel of ASRC, there is an issue for ideal ratio case, the speed of copy data is faster than sample frequency, because ASRC output data is very fast in ideal ratio mode. So it is reasonable to use the dma channel of Back-End peripheral. then copying speed of DMA is controlled by data consumption speed in the peripheral FIFO, Signed-off-by:
-
Shengjiu Wang authored
The dma channel has been requested by Back-End cpu dai driver already. If fsl_asrc_dma requests dma chan with same dma:tx symlink, then there will be below warning with SDMA. [ 48.174236] fsl-esai-dai 2024000.esai: Cannot create DMA dma:tx symlink So if we can reuse the dma channel of Back-End, then the issue can be fixed. In order to get the dma channel which is already requested in Back-End. we use the exported two functions (snd_soc_lookup_component_nolocked and soc_component_to_pcm). If we can get the dma channel, then reuse it, if can't, then request a new one. Signed-off-by:
-
Shengjiu Wang authored
In DPCM case, Front-End needs to get the dma chan which has been requested by Back-End and reuse it. Signed-off-by:
-
Shengjiu Wang authored
snd_soc_lookup_component_nolocked can be used for the DPCM case that Front-End needs to get the unused platform component but added by Back-End cpu dai driver. If the component is gotten, then we can get the dma chan created by Back-End component and reused it in Front-End. Signed-off-by:
-
- 11 Jun, 2020 2 commits
-
-
Srinivas Kandagatla authored
Successful send of EOS command does not indicate that EOS is actually finished, correct event to wait EOS is finished is EOS_RENDERED event. EOS_RENDERED means that the DSP has finished processing all the buffers for that particular session and stream. This patch fixes EOS handling! Fixes: 68fd8480 ("ASoC: qdsp6: q6asm: Add support to audio stream apis") Signed-off-by:
-
Steve Lee authored
Update max98390_readable_register and max98390_volatile_reg Signed-off-by:
Steve Lee <steves.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20200611094800.18422-1-steves.lee@maximintegrated.comSigned-off-by:
-
- 09 Jun, 2020 8 commits
-
-
Mark Brown authored
Merge series "ASoC: Fix dailink checks for DPCM" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: We've had a couple of changes that introduce regressions with the multi-cpu DAI solutions, and while trying to fix them we found additional inconsistencies that should also go to stable branches. Bard Liao (1): ASoC: core: only convert non DPCM link to DPCM link Pierre-Louis Bossart (3): ASoC: soc-pcm: dpcm: fix playback/capture checks ASoC: Intel: boards: replace capture_only by dpcm_capture ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +- sound/soc/soc-core.c | 22 ++++++++-- sound/soc/soc-pcm.c | 44 ++++++++++++++----- sound/soc/sof/nocodec.c | 6 ++- 7 files changed, 62 insertions(+), 20 deletions(-) base-commit: 8a9144c1 -- 2.20.1
-
Hans de Goede authored
The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted. Add a DMI quirk with the correct settings for this model. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Hans de Goede authored
The Toshiba Encore WT10-A tablet almost fully works with the default settings for Bay Trail CR devices. The only issue is that it uses a digital mic. connected the the DMIC1 input instead of an analog mic. Add a quirk for this model using the default settings with the input-map replaced with BYT_RT5640_DMIC1_MAP. Signed-off-by:
-
Pierre-Louis Bossart authored
With additional checks on dailinks, we see errors such as [ 3.000418] sof-nocodec sof-nocodec: CPU DAI DMIC01 Pin for rtd NoCodec-6 does not support playback It's not clear why we set the dpcm_playback and dpcm_capture flags unconditionally, add a check on number of channels for each direction to avoid invalid configurations. Fixes: 8017b8fd ('ASoC: SOF: Add Nocodec machine driver support') Signed-off-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Pierre-Louis Bossart authored
It's not clear why specific FE dailinks use capture_only flags, likely blind copy/paste from Chromebook driver to the other. Replace by dpcm_capture, this will make future alignment and removal of flags easier. Signed-off-by:
-
Bard Liao authored
Additional checks for valid DAIs expose a corner case, where existing BE dailinks get modified, e.g. HDMI links are tagged with dpcm_capture=1 even if the DAIs are for playback. This patch makes those changes conditional and flags configuration issues when a BE dailink is has no_pcm=0 but dpcm_playback or dpcm_capture=1 (which makes no sense). As discussed on the alsa-devel mailing list, there are redundant flags for dpcm_playback, dpcm_capture, playback_only, capture_only. This will have to be cleaned-up in a future update. For now only correct and flag problematic configurations. Fixes: 218fe9b7 ("ASoC: soc-core: Set dpcm_playback / dpcm_capture") Suggested-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Recent changes in the ASoC core prevent multi-cpu BE dailinks from being used. DPCM does support multi-cpu DAIs for BE Dailinks, but not for FE. Handle the FE checks first, and make sure all DAIs support the same capabilities within the same dailink. Fixes: 9b5db059 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") Signed-off-by:
-
Pavel Machek (CIP) authored
free_irq() is missing in case of error, fix that. Signed-off-by:
Pavel Machek (CIP) <pavel@denx.de> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200606153103.GA17905@amdSigned-off-by:
-
- 05 Jun, 2020 2 commits
-
-
Dan Murphy authored
Fix the spelling of 'specified'. Also fix grammarical issue with the use of 'a' over 'an' Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200602193524.30309-1-dmurphy@ti.comSigned-off-by:
-
Colin Ian King authored
Currently if the allocation of ldata fails the error return path does not kfree the allocated links object. Fix this by adding an error exit return path that performs the necessary kfree'ing. Fixes: 7864a79f ("ASoC: meson: add axg sound card support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Resource leak") Link: https://lore.kernel.org/r/20200604171216.60043-1-colin.king@canonical.comSigned-off-by:
-
- 04 Jun, 2020 4 commits
-
-
Steve Lee authored
malformed firmware file can cause out-of-bound access and crash during dsm_param bin loading. - add MIN/MAX param size to avoid out-of-bound access. - read start addr and size of param and check bound. - add condition that fw->size > param_size + _PAYLOAD_OFFSET to confirm enough data. Signed-off-by: -
Takashi Iwai authored
This patch addresses a compile warning: sound/soc/codecs/max98390.c:781:3: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘size_t {aka const unsigned int}’ [-Wformat=] Fixes: a6e3f4f3 ("ASoC: max98390: Added Amplifier Driver") Signed-off-by: -
Shengjiu Wang authored
Defer probe when fail to find codec device, because the codec device maybe probed later than machine driver. Signed-off-by:
-
Oder Chiou authored
Some DMIC components will not work correctly in the clock rate 3.072MHz. We recommend the clock rate 1.536MHz in the gerenal case. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200604071016.3981-1-oder_chiou@realtek.comSigned-off-by:
-
- 01 Jun, 2020 1 commit
-
-
John Stultz authored
Fixes the following kCFI crash seen on db845c, caused by the function prototypes not matching the callback function prototype. [ 82.585661] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001 [ 82.595387] Mem abort info: [ 82.599463] ESR = 0x96000005 [ 82.602658] EC = 0x25: DABT (current EL), IL = 32 bits [ 82.608177] SET = 0, FnV = 0 [ 82.611829] EA = 0, S1PTW = 0 [ 82.615369] Data abort info: [ 82.618751] ISV = 0, ISS = 0x00000005 [ 82.622641] CM = 0, WnR = 0 [ 82.625774] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000174259000 [ 82.632292] [0000000000000001] pgd=0000000000000000, pud=0000000000000000 [ 82.639167] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 82.644795] Modules linked in: hci_uart btqca xhci_plat_hcd xhci_pci_renesas xhci_pci xhci_hcd wcn36xx wcnss_ctrl wcd934x vctrl_regulator ufs_qcom syscon_reboot_e [ 82.644927] qcom_apcs_ipc_mailbox q6asm_dai q6routing q6asm q6afe_dai q6adm q6afe q6core q6dsp_common pm8941_pwrkey pm8916_wdt platform_mhu pinctrl_spmi_mpp pine [ 82.812982] CPU: 3 PID: 240 Comm: kworker/u16:4 Tainted: G W 5.6.0-rc7-mainline-00960-g0c34353d11b9-dirty #1 [ 82.824201] Hardware name: Thundercomm Dragonboard 845c (DT) [ 82.829937] Workqueue: qcom_apr_rx apr_rxwq [apr] [ 82.834698] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 82.839553] pc : __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.844754] lr : __cfi_check+0x3a8/0x3b0 [q6asm_dai] [ 82.849767] sp : ffffffc0105f3c20 [ 82.853123] x29: ffffffc0105f3c30 x28: 0000000000000020 [ 82.858489] x27: ffffff80f4588400 x26: ffffff80f458ec94 [ 82.863854] x25: ffffff80f458ece8 x24: ffffffe3670c7000 [ 82.869220] x23: ffffff8094bb7b34 x22: ffffffe367137000 [ 82.874585] x21: bd07909b332eada6 x20: 0000000000000001 [ 82.879950] x19: ffffffe36713863c x18: ffffff80f8df4430 [ 82.885316] x17: 0000000000000001 x16: ffffffe39d15e660 [ 82.890681] x15: 0000000000000001 x14: 0000000000000027 [ 82.896047] x13: 0000000000000000 x12: ffffffe39e6465a0 [ 82.901413] x11: 0000000000000051 x10: 000000000000ffff [ 82.906779] x9 : 000ffffffe366c19 x8 : c3c5f18762d1ceef [ 82.912145] x7 : 0000000000000000 x6 : ffffffc010877698 [ 82.917511] x5 : ffffffc0105f3c00 x4 : 0000000000000000 [ 82.922877] x3 : 0000000000000000 x2 : 0000000000000001 [ 82.928243] x1 : ffffffe36713863c x0 : 0000000000000001 [ 82.933610] Call trace: [ 82.936099] __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.940955] q6asm_srvc_callback+0x22c/0x618 [q6asm] [ 82.945973] apr_rxwq+0x1a8/0x27c [apr] [ 82.949861] process_one_work+0x2e8/0x54c [ 82.953919] worker_thread+0x27c/0x4d4 [ 82.957715] kthread+0x144/0x154 [ 82.960985] ret_from_fork+0x10/0x18 [ 82.964603] Code: a8c37bfd f85f8e5e d65f03c0 b40000a0 (39400008) [ 82.970762] ---[ end trace 410accb839617143 ]--- [ 82.975429] Kernel panic - not syncing: Fatal exception Signed-off-by:
-
- 30 May, 2020 8 commits
-
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. This patch adds missing return when error case. Signed-off-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. card has "card->probe" and "card->late_probe" callbacks, and "late_probe" callback is called after "probe". This means, we can set "card->probed" flag afer "late_probe" for all cases. Signed-off-by:
-
Kuninori Morimoto authored
Card related function should be implemented at soc-card now. This patch adds it. One note here is that card has "card->probe" and "card->late_probe" callbacks. Because it needs to care "late_probe", "card->probed" flag is set under if (card->probe) at snd_soc_card_probe(). Signed-off-by:
-
Kuninori Morimoto authored
We already have bit field to control snd_soc_card. Let's add "probed" field on it instead of local variable. One note here is that soc_cleanup_card_resources() will be called as (A) formal cleanup or as (B) error handling, thus, it needs to distinguish these. In (A) case, card will have "instantiated" flag if all probe callback functions were called without error. Thus, snd_soc_unbind_card() is using it to judging card was probed. But this this patch removes it, because it is no longer needed. Signed-off-by:
-
