- 20 Nov, 2014 2 commits
-
-
Jianhua Xie authored
This patch adds [2.5|20|40|56] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jianhua Xie authored
Port Key was determined as 16 bits according to the link speed, duplex and user key (which is yet not supported). In the old speed field, 5 bits are for speed [1|10|100|1000|10000]Mbps as below: -------------------------------------------------------------- Port key :| User key | Speed | Duplex| -------------------------------------------------------------- 16 6 1 0 This patch keeps the old layout, but changes AD_LINK_SPEED_BITMASK from bit type to an enum type. In this way, the speed field can expand speed type from 5 to 32. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 19 Nov, 2014 10 commits
-
-
Alexei Starovoitov authored
- fix NULL pointer dereference: kernel/bpf/arraymap.c:41 array_map_alloc() error: potential null dereference 'array'. (kzalloc returns null) kernel/bpf/arraymap.c:41 array_map_alloc() error: we previously assumed 'array' could be null (see line 40) - integer overflow check was missing in arraymap (hashmap checks for overflow via kmalloc_array()) - arraymap can round_up(value_size, 8) to zero. check was missing. - hashmap was missing zero size check as well, since roundup_pow_of_two() can truncate into zero - found a typo in the arraymap comment and unnecessary empty line Fix all of these issues and make both overflow checks explicit U32 in size. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Markus Elfring authored
The __module_get() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The proc_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Sudip Mukherjee authored
remove unused variable Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac: update driver documentation Recently many changes have been done inside the driver so this patch updates the driver's doc for example reviewing information for the rx and tx processes that are managed by napi method, adding new information for missing glue-logic files etc. Also this reviews and fixes what is reported when run kernel-doc script. ==================== Signed-off-by: -
Giuseppe CAVALLARO authored
When run ./scripts/kernel-doc several warnings are reported so this patch fix them. Also it reviews many comments and adds new ones. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch adds some useful comments inside the common header file to provide information about the APIs exposed by the driver. Signed-off-by:
-
Giuseppe CAVALLARO authored
Recently many changes have been done inside the driver so this patch updates the driver's doc for example reviewing information for the rx and tx processes that are managed by napi method, adding new information for missing glue-logic files etc. Signed-off-by:
-
Eric Dumazet authored
While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Jason Wang authored
After commit 5d097109 ("tun: only queue packets on device"), NETDEV_TX_OK was returned for dropped packets. This will confuse pktgen since dropped packets were counted as sent ones. Fixing this by returning NET_XMIT_DROP to let pktgen count it as error packet. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
- 18 Nov, 2014 28 commits
-
-
Rick Jones authored
If icmp_rcv() has successfully processed the incoming ICMP datagram, we should use consume_skb() rather than kfree_skb() because a hit on the likes of perf -e skb:kfree_skb is not called-for. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Fabian Frederick authored
Also remove spaces after cast. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
See Documentation/CodingStyle chapter 6. Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== this is a pull request of 9 patches for net-next/master. All 9 patches are by Roger Quadros and update the c_can platform driver. First by improving the initialization sequence of the message RAM, making use of syscon/regmap. In the later patches support for various TI SoCs is added. ==================== Signed-off-by: -
David S. Miller authored
Lothar Waßmann says: ==================== net: fec: assorted cleanup patches This patch series is a followup to: <1415350967-2238-1-git-send-email-LW@KARO-electronics.de> [PATCHv4 1/1] net: fec: fix regression on i.MX28 introduced by rx_copybreak support to apply the cleanup patches that were originally sent along with the bugfix patch. ==================== Signed-off-by: -
Lothar Waßmann authored
The return value of swap_buffer() is not used by any caller, thus remove it. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
Lothar Waßmann authored
Eliminate the DIV_ROUND_UP() and change the loop counter increment to 4 instead. This results in saving 6 instructions in the functions assembly code. Signed-off-by:
-
Lothar Waßmann authored
when swap_buffer() is being called, we know for sure, that we need to byte swap the data. Furthermore, this function is called for swapping data in both directions. Thus cpu_to_be32() is semantically not correct for all use cases. Use swab32s() to reflect this. Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
fep->bufdesc_ex is treated as a boolean value, thus declare it as such. Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
consistently use TABs for indentation Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== implementation of eBPF maps v1->v2: renamed flags for MAP_UPDATE_ELEM command to be more concise, clarified commit logs and improved comments in patches 1,3,7 per discussions with Daniel Old v1 cover: this set of patches adds implementation of HASH and ARRAY types of eBPF maps which were described in manpage in commit b4fc1a46("Merge branch 'bpf-next'") The difference vs previous version of these patches from August: - added 'flags' attribute to BPF_MAP_UPDATE_ELEM - in HASH type implementation removed per-map kmem_cache. I was doing kmem_cache_create() for every map to enable selective slub debugging to check for overflows and leaks. Now it's not needed, so just use normal kmalloc() for map elements. - added ARRAY type which was mentioned in manpage, but wasn't public yet - added map testsuite and removed temporary bits from test_stubs Note, eBPF programs cannot be attached to events yet. It will come in the next set. ==================== Signed-off-by:
-
Alexei Starovoitov authored
proper types and function helpers are ready. Use them in verifier testsuite. Remove temporary stubs Signed-off-by:
-
Alexei Starovoitov authored
expose bpf_map_lookup_elem(), bpf_map_update_elem(), bpf_map_delete_elem() map accessors to eBPF programs Signed-off-by:
-
Alexei Starovoitov authored
. check error conditions and sanity of hash and array map APIs . check large maps (that kernel gracefully switches to vmalloc from kmalloc) . check multi-process parallel access and stress test Signed-off-by:
-
Alexei Starovoitov authored
fix errno of BPF_MAP_LOOKUP_ELEM command as bpf manpage described it in commit b4fc1a46("Merge branch 'bpf-next'"): ----- BPF_MAP_LOOKUP_ELEM int bpf_lookup_elem(int fd, void *key, void *value) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), .value = ptr_to_u64(value), }; return bpf(BPF_MAP_LOOKUP_ELEM, &attr, sizeof(attr)); } bpf() syscall looks up an element with given key in a map fd. If element is found it returns zero and stores element's value into value. If element is not found it returns -1 and sets errno to ENOENT. and further down in manpage: ENOENT For BPF_MAP_LOOKUP_ELEM or BPF_MAP_DELETE_ELEM, indicates that element with given key was not found. ----- In general all BPF commands return ENOENT when map element is not found (including BPF_MAP_GET_NEXT_KEY and BPF_MAP_UPDATE_ELEM with flags == BPF_MAP_UPDATE_ONLY) Subsequent patch adds a testsuite to check return values for all of these combinations. Signed-off-by:
-
Alexei Starovoitov authored
add new map type BPF_MAP_TYPE_ARRAY and its implementation - optimized for fastest possible lookup() . in the future verifier/JIT may recognize lookup() with constant key and optimize it into constant pointer. Can optimize non-constant key into direct pointer arithmetic as well, since pointers and value_size are constant for the life of the eBPF program. In other words array_map_lookup_elem() may be 'inlined' by verifier/JIT while preserving concurrent access to this map from user space - two main use cases for array type: . 'global' eBPF variables: array of 1 element with key=0 and value is a collection of 'global' variables which programs can use to keep the state between events . aggregation of tracing events into fixed set of buckets - all array elements pre-allocated and zero initialized at init time - key as an index in array and can only be 4 byte - map_delete_elem() returns EINVAL, since elements cannot be deleted - map_update_elem() replaces elements in an non-atomic way (for atomic updates hashtable type should be used instead) Signed-off-by: -
Alexei Starovoitov authored
add new map type BPF_MAP_TYPE_HASH and its implementation - maps are created/destroyed by userspace. Both userspace and eBPF programs can lookup/update/delete elements from the map - eBPF programs can be called in_irq(), so use spin_lock_irqsave() mechanism for concurrent updates - key/value are opaque range of bytes (aligned to 8 bytes) - user space provides 3 configuration attributes via BPF syscall: key_size, value_size, max_entries - map takes care of allocating/freeing key/value pairs - map_update_elem() must fail to insert new element when max_entries limit is reached to make sure that eBPF programs cannot exhaust memory - map_update_elem() replaces elements in an atomic way - optimized for speed of lookup() which can be called multiple times from eBPF program which itself is triggered by high volume of events . in the future JIT compiler may recognize lookup() call and optimize it further, since key_size is constant for life of eBPF program Signed-off-by: -
Alexei Starovoitov authored
the current meaning of BPF_MAP_UPDATE_ELEM syscall command is: either update existing map element or create a new one. Initially the plan was to add a new command to handle the case of 'create new element if it didn't exist', but 'flags' style looks cleaner and overall diff is much smaller (more code reused), so add 'flags' attribute to BPF_MAP_UPDATE_ELEM command with the following meaning: #define BPF_ANY 0 /* create new element or update existing */ #define BPF_NOEXIST 1 /* create new element if it didn't exist */ #define BPF_EXIST 2 /* update existing element */ bpf_update_elem(fd, key, value, BPF_NOEXIST) call can fail with EEXIST if element already exists. bpf_update_elem(fd, key, value, BPF_EXIST) can fail with ENOENT if element doesn't exist. Userspace will call it as: int bpf_update_elem(int fd, void *key, void *value, __u64 flags) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), .value = ptr_to_u64(value), .flags = flags; }; return bpf(BPF_MAP_UPDATE_ELEM, &attr, sizeof(attr)); } First two bits of 'flags' are used to encode style of bpf_update_elem() command. Bits 2-63 are reserved for future use. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-11-18 This series contains updates to i40e only. Shannon provides a patch to clean up the driver to only warn once that PTP is not supported when linked at 100Mbps. Mitch provides a fix for i40e where the VF interrupt processing takes a long time and it is possible that we could lose a VFLR event if it happens while processing a VFLR on another VF. To correct this situation, we enable the VFLR interrupt cause before we begin processing any pending resets. Neerav provides several patches to update DCB support in i40e. When there are DCB configuration changes based on DCBx, the firmware suspends the port's Tx and generates an event to the PF. The PF is then responsible to reconfigure the PF VSIs and switching topology as per the updated DCB configuration and then resume the port's Tx by calling the "Resume Port Tx" AQ command, so add this call to the flow that handles DCB re-configuration in the PF. Allow the driver to query and use DCB configuration from firmware when firmware DCBx agent is in CEE mode. Add a check whether LLDP Agent's default AdminStatus is enabled or disabled on a given port, and sets DCBx status to disabled if the status is disabled. Fix an issue when the port TC configuration changes as a result of DCBx and the driver modifies the enabled TCs for the VEBs it manages but does not update the enabled_tc value that was cached on a per VEB basis. Add a new PF state so that if a port's Tx is in suspended state the Tx queue disable flow would just put the request for the queue to be disabled and return without waiting for the queue to be actually disabled. Allows the driver to enable/disable the XPS based on the number of TCs being enabled for the given VSI. v2: Dropped patch "i40e: Handle a single mss packet with more than 8 frags" while we rework the patch after we test a bit more based on feedback from Eric Dumazet. ==================== Signed-off-by: -
Denis Kirjanov authored
Reduce duplicated code by unifying BPF_ALU | BPF_MOD | BPF_X and BPF_ALU | BPF_DIV | BPF_X CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Daniel Borkmann<dborkman@redhat.com> CC: Philippe Bergheaud<felix@linux.vnet.ibm.com> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Acked-by:
-
