- 06 Mar, 2007 28 commits
-
-
Greg Banks authored
Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to choose the mode for mapping NFS thread service pools to CPUs. Values are: auto choose a mapping mode heuristically global (default, same as the pre-2.6.19 code) a single global pool percpu one pool per CPU pernode one pool per NUMA node Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch makes the default "global". The pool mode can be changed after boot/modprobe using /sys, if the NFS and lockd services have been shut down. A useful side effect of this change is to fix a small memory leak when unloading the module. Signed-off-by:
Greg Banks <gnb@melbourne.sgi.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
When the last thread of nfsd exits, it shuts down all related sockets. It currently uses svc_close_socket to do this, but that only is immediately effective if the socket is not SK_BUSY. If the socket is busy - i.e. if a request has arrived that has not yet been processes - svc_close_socket is not effective and the shutdown process spins. So create a new svc_force_close_socket which removes the SK_BUSY flag is set and then calls svc_close_socket. Also change some open-codes loops in svc_destroy to use list_for_each_entry_safe. Signed-off-by:
-
NeilBrown authored
They don't really save that much, and aren't worth the hassle. Signed-off-by:
-
NeilBrown authored
The sunrpc server code needs to know the source and destination address for UDP packets so it can reply properly. It currently copies code out of the network stack to pick the pieces out of the skb. This is ugly and causes compile problems with the IPv6 stuff. So, rip that out and use recv_msg instead. This is a much cleaner interface, but has a slight cost in that the checksum is now checked before the copy, so we don't benefit from doing both at the same time. This can probably be fixed. Signed-off-by:
-
Jeff Dike authored
Comment the fact that sig_info is initialized early in boot, and thus doesn't need any locking. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
Add a debugging message in the case that mapping a stub fails. Signed-off-by:
-
Jeff Dike authored
Fix a few formatting bugs in the signal code. Signed-off-by:
-
Jeff Dike authored
Include linux/types.h here because we need a definition of __u32. This file appears not be exported verbatim by libc, so I think this doesn't have any userspace consequences. Signed-off-by:
-
Dimitri Gorokhovik authored
initramfs ended up depending on BLOCK: INITRAMFS_SOURCE <-- BLK_DEV_INITRD <-- BLOCK This inhibits use of customized-initramfs-over-ramfs without block layer (ramfs would still be enabled), useful in embedded applications. Move BLK_DEV_INITRD out of 'drivers/block/Kconfig' and into 'init/Kconfig', make it unconditional. Signed-off-by:
Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
This patch adds support for the struct pci_driver shutdown method to cciss. We require notification of an impending reboot or shutdown so that we can flush the battery backed write cache (BBWC) on the Smart Array controller. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Mike Miller (OS Dev) authored
This patch changes the way we determine if a logical volume is larger than 2TB. The original test looked for a total_size of 0. Originally we added 1 to the total_size. That would make our read_capacity return size 0 for >2TB lv's. We assumed that we could not have a lv size of 0 so it seemed OK until we were in a clustered system. The backup node would see a size of 0 due to the reservation on the drive. That caused the driver to switch to 16-byte CDB's which are not supported on older controllers. After that everything was broken. It may seem petty but I don't see the value in trying to determine if the LBA is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's for all read/write operations. Please consider this for inclusion. Signed-off-by:
-
Josh Triplett authored
rcutorture's module parameters currently use permissions of 0, so they don't show up in /sys/module/rcutorture/parameters. Change the permissions on all module parameters to world-readable (0444). rcutorture does all of its initialization and thread startup when loaded and relies on the parameters not changing during execution, so they should not permit writing. However, reading seems fine. Signed-off-by:
Josh Triplett <josh@freedesktop.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Dave Kleikamp authored
This fixes a regression caused by 22c8ca78. nobh_prepare_write() no longer marks the page uptodate, so nobh_truncate_page() needs to do it. Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Daniel Walker authored
I've only seen this on x86_64. The vsyscall state only gets updated when a timer interrupts comes in. So if the time is set long before the next timer, there will be a period when a gettimeofday() won't reflect the correct time. I added an explicit update_vsyscall() during the settimeofday(), that way the vsyscall state doesn't get stale. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=8130Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Adrian Bunk authored
Remove the no longer used custom_sched_clock. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Thomas Gleixner authored
The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable clocksource and clock event sources are registered. The switch to high resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq afterwards. That way the tick emulation timer, which was set up in the switch to highres might be executed in the softirq context, which is a BUG. The rbtree has not to be touched by the softirq after the highres switch. This BUG was observed by Andres Salomon, who provided the information to debug it. Return early from the softirq, when the switch was sucessful. [dilinger@debian.org: add debug warning] [akpm@linux-foundation.org: make debug warning compile] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andres Salomon <dilinger@debian.org> Acked-by:
Andres Salomon <dilinger@debian.org> Acked-by:
-
Andres Salomon authored
The description for the hrtimer_clock_base struct describes "hrtimer_base". That should be hrtimer_clock_base. Signed-off-by:
-
Andres Salomon authored
The description for HRTIMER_CB_IRQSAFE_NO_SOFTIRQ is backwards; "NO SOFTIRQ" sounds a whole lot like it means it must not be run in a softirq. Signed-off-by:
-
Andres Salomon authored
Prior to commit 95492e46 ([PATCH] x86: rewrite SMP TSC sync code), the headers in asm-i386 did not really require anything in include/asm-x86_64. This means that distributions such as fedora did not include asm-x86_64 in kernel-devel headers for i386. Ingo's commit changed that, and broke things. This is easy enough to hack around in package builds by just including asm-x86_64 on i386, but that's kind of annoying. If anything, x86_64 should depend upon i386, not the other way around. This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h, rather than vice-versa. Signed-off-by:
-
Thomas Gleixner authored
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by:
-
Mark Lord authored
Any attempt to open/use a bluetooth rfcomm device locks up scheduling completely on my machine. Interrupts (ping, alt-sysrq) seem to be alive, but nothing else. This was working fine in 2.6.20, broken now in 2.6.21-rc2-git* Reverting this change (below) fixes it: | author Marcel Holtmann <marcel@holtmann.org> | Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100) | committer David S. Miller <davem@sunset.davemloft.net> | Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800) | commit c1a33136 | tree 337a876f727061362b6a169f8759849c105b8f7a tree | snapshot | parent f5ffd462 commit | diff | | [Bluetooth] Make use of device_move() for RFCOMM TTY devices | | In the case of bound RFCOMM TTY devices the parent is not available | before its usage. So when opening a RFCOMM TTY device, move it to | the corresponding ACL device as a child. When closing the device, | move it back to the virtual device tree. | Signed-off-by: Marcel Holtmann <marcel@holtmann.org> The simplest fix for this bug is to prevent sysfs_move_dir() from self-deadlocking when (old_parent == new_parent). This patch prevents total system lockup when using rfcomm devices. Signed-off-by:
Mark Lord <mlord@pobox.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
James Simmons authored
Fix the following error if FB_DDC=n Kernel: arch/x86_64/boot/bzImage is ready (#1) Building modules, stage 2. MODPOST 229 modules WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix implicit declarations and missing code in atyfb. drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a ty_ld_lcd' drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a ty_st_lcd' atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd' atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Dave Jones authored
drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init': drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type' Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Andrew Morton authored
arch/i386/kernel/vmi.c: In function 'vmi_safe_halt': arch/i386/kernel/vmi.c:262: warning: implicit declaration of function 'vmi_stop_hz_timer' arch/i386/kernel/vmi.c:266: warning: implicit declaration of function 'vmi_account_time_restart_hz_timer' Acked-by:
-
Thomas Gleixner authored
The programming of periodic tick devices needs to be saved/restored across suspend/resume - otherwise we might end up with a system coming up that relies on getting a PIT (or HPET) interrupt, while those devices default to 'no interrupts' after powerup. (To confuse things it worked to a certain degree on some systems because the lapic gets initialized as a side-effect of SMP bootup.) This suspend / resume thing was dropped unintentionally during the last-minute -mm code reshuffling. Signed-off-by:
-
- 05 Mar, 2007 12 commits
-
-
Ingo Molnar authored
CONFIG_PARAVIRT broke old glibc bootup: it silently turned off the selectability of CONFIG_COMPAT_VDSO and thus rendered distro kernels unbootable on old-style VDSO glibc setups. the proper solution is to keep COMPAT_VDSO available - if a hypervisor needs any modification of that concept then we'll judge those changes in full context, once those changes are submitted. Signed-off-by:
-
git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Allow enable/disable of fb backlights, fixing regressions backlight: Fix nvidia backlight initial brightness
-
Ingo Molnar authored
there's a new NMI watchdog related problem: KVM crashes on certain bzImages because ... we enable the NMI watchdog by default (even if the user does not ask for it) , and no other OS on this planet does that so KVM doesnt have emulation for that yet. So KVM injects a #GP, which crashes the Linux guest: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 EIP: 0060:[<c011a8ae>] Not tainted VLI EFLAGS: 00000246 (2.6.20-rc5-rt0 #3) EIP is at setup_apic_nmi_watchdog+0x26d/0x3d3 and no, i did /not/ request an nmi_watchdog on the boot command line! Solution: turn off that darn thing! It's a debug tool, not a 'make life harder' tool!! with this patch the KVM guest boots up just fine. And with this my laptop (Lenovo T60) also stopped its sporadic hard hanging (sometimes in acpi_init(), sometimes later during bootup, sometimes much later during actual use) as well. It hung with both nmi_watchdog=1 and nmi_watchdog=2, so it's generally the fact of NMI injection that is causing problems, not the NMI watchdog variant, nor any particular bootup code. [ NMI breaks on some systems, esp in combination with SMM -Arjan ] Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
do not use default=y for CONFIG_VMI (we do not do that for any driver or special-hardware feature): the overwhelming majority of Linux users does not need it, and interested users and distributions can enable it as-needed. Signed-off-by:
-
Ingo Molnar authored
Clarify the description of the CONFIG_VMI option: describe the reality that VMI is a VMWare-only interface for now. Once that changes and another hypervisor adopts the VMI ABI we can change the text. As can be seen from the Xen paravirtualization patches submitted to lkml the Xen project has chosen its own, non-VMI interface between Xen and the para-Linux - so remove Xen from the description. Signed-off-by:
-
Ingo Molnar authored
Temove the mistaken turning on of NO_IDLE_HZ on x86+PARAVIRT kernels. It's an obsolete, limited form of dynticks. Signed-off-by:
-
David Miller authored
CT based mach64 cards were reported to hang on sparc64 boxes when compiled with gcc-4.1.x and later. Looking at this piece of code, it's no surprise. A critical delay was implemented as an empty for() loop, and gcc 4.0.x and previous did not optimize it away, so we did get a delay. But gcc-4.1.x and later can optimize it away, and we get crashes. Use a real udelay() to fix this. Fix verified on SunBlade100. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrian Bunk authored
CC arch/i386/kernel/vmi.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c: In function 'vmi_map_pt_hook': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE0' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/arch/i386/kernel/vmi.c:387: error: 'KM_PTE1' undeclared (first use in this function) make[2]: *** [arch/i386/kernel/vmi.o] Error 1 Signed-off-by:
-
Sam Ravnborg authored
Replacing use of UTS_RELEASE with utsname()->release avoids that the usb-storage driver is recompiled each time the kernel version changes. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Roland Kletzing authored
Add some documentation for the new and very useful io-accounting feature. It's being added to Documentation/filesystems/proc.txt Signed-off-by:
Roland Kletzing <devzero@web.de> Signed-off-by:
-
Antonino A. Daplas authored
Fix the following compile error: MODPOST 327 modules WARNING: "aty_st_lcd" [drivers/video/aty/atyfb.ko] undefined! WARNING: "aty_ld_lcd" [drivers/video/aty/atyfb.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by:
-
Michal Piotrowski authored
"drivers/char/epca.c:2741: warning: 'get_termio' defined but not used" Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
