- 07 Jun, 2017 39 commits
-
-
Hans de Goede authored
menu controls are not allowed to have a step size, set step to 0 to fix an oops from the WARN_ON in v4l2_ctrl_new_custom() triggering because of this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans de Goede authored
Do not call dev_warn with a NULL device, this silence the following 2 warnings: [ 14.392194] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO [ 14.392257] (NULL device *): Failed to find gmin variable gmin_V1P8GPIO We could switch to using pr_warn for dev == NULL instead, but as comments in the source indicate, the check for these 2 special gmin variables with a NULL device is a workaround for 2 specific evaluation boards, so completely silencing the missing warning for these actually is a good thing. Signed-off-by:
-
Hans de Goede authored
efivar_entry_get has certain alignment requirements and the atomisp platform code was not honoring these, causing an oops by triggering the WARN_ON in arch/x86/platform/efi/efi_64.c: virt_to_phys_or_null_size(). This commit fixes this by using the members of the efivar struct embedded in the efivar_entry struct we kzalloc as arguments to efivar_entry_get(), which is how all the other callers of efivar_entry_get() do this. Signed-off-by:
-
Alan Cox authored
Between the ISP2400 and ISP2401 code base this function moved file. The merge of the drivers left us with two version in ifdefs. Resolve this down to a single copy. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
We won't be adding abstractions or moving them here so kill it. Signed-off-by:
-
Alan Cox authored
ISP2401 introduced a helper for this which we can use just as well on the ISP2400 and remove some more noise differences. Signed-off-by:
-
Alan Cox authored
ISP2401 introduced a rather sensible change to cut through the structure spaghetti. Adopt that for the ISP2400 as well. It makes no difference to the actual code other than readability. Signed-off-by:
-
Alan Cox authored
The ISP2401 version of this function returns a pointer to the buffer, whilst the ISP2400 version returns a boolean if a slot is found. We can trivially unify the code to use the ISP2401 version. Signed-off-by:
-
Alan Cox authored
This define is never set and these code paths are never used so they can go away. Signed-off-by:
-
Dan Carpenter authored
The isp->inputs[] array has isp->input_cnt elements which have been initialized so this > should be >=. This bug is harmless. The check against ATOM_ISP_MAX_INPUTS prevents us from reading beyond the end of the array. The uninitialized elements are zeroed out so we will end up returning -EINVAL a few lines later because the .camera pointer is NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alan Cox authored
The two drivers were machine merged and in this case the machine output was to say the least not optimal. Signed-off-by:
-
Alan Cox authored
HRT_UNSCHED is never defined or set in the driver, so this is dead code that can be retired, simplifying the code a bit further. Signed-off-by:
-
Alan Cox authored
With the removal of the HAS_BL bootloader code the value of NUM_OF_BLS is an invariant zero. So let's get rid of it. Signed-off-by:
-
Alan Cox authored
Kill off the HAS_BL define and the code and includes it brackets. We never define HAS_BL or use that functionality. Signed-off-by:
-
Juan Antonio Pedreira Martos authored
Fix a couple of sparse warnings: drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:59:14: warning: symbol 'repool_pgnr' was not declared. Should it be static? drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:387:6: warning: symbol 'punit_ddr_dvfs_enable' was not declared. Should it be static? Mark these symbols as static, so they are no longer incorrectly exported. Signed-off-by:
Juan Antonio Pedreira Martos <juanpm1@gmail.com> Signed-off-by:
-
Paolo Cretaro authored
Fix warning issued by sparse: Using plain integer as NULL pointer Signed-off-by:
Paolo Cretaro <melko@frugalware.org> Signed-off-by:
-
Christoph Fanelsa authored
Fix checkpatch warnings of prefered using '%s..", __func__' as function name in a string Signed-off-by:
Christoph Fanelsa <eddi1983@gmx.net> Signed-off-by:
-
Hirokazu Honda authored
A driver error message is shown without DEBUG definition to find an error and debug easily. Signed-off-by:
Hirokazu Honda <hiroh@chromium.org> Signed-off-by:
-
Daniel Kurtz authored
If the mdp_* nodes are under an mdp sub-node, their corresponding platform device does not automatically get its iommu assigned properly. Fix this by moving the mdp component nodes up a level such that they are siblings of mdp and all other SoC subsystems. This also simplifies the device tree. Although it fixes iommu assignment issue, it also break compatibility with old device tree. So, the patch in driver is needed to iterate over sibling mdp device nodes, not child ones, to keep driver work properly. Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Minghsiu Tsai authored
If the mdp_* nodes are under an mdp sub-node, their corresponding platform device does not automatically get its iommu assigned properly. Fix this by moving the mdp component nodes up a level such that they are siblings of mdp and all other SoC subsystems. This also simplifies the device tree. Although it fixes iommu assignment issue, it also break compatibility with old device tree. So, the patch in driver is needed to iterate over sibling mdp device nodes, not child ones, to keep driver work properly. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philipp Zabel authored
That way we don't have to rely on userspace to inject the headers on IDR requests, and there is always enough information to start decoding at an I-frame. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Implement the V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME control to force IDR frames. This is useful to implement VFU (Video Fast Update) on RTP transmissions. We already force an IDR frame at the beginning of each GOP to work around a firmware bug on i.MX27, use the same mechanism to service IDR requests from userspace. Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: snd_cx18_pcm_hw_free (acquire the lock by spin_lock_irqsave) vfree --> may sleep To fix it, the "substream->runtime->dma_area" is passed to a temporary value, and mark it NULL when holding the lock. The memory is freed by vfree through the temporary value outside the lock holding. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> [hans.verkuil@cisco.com: removed unnecessary 'if (dma_area)'] Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: snd_ivtv_pcm_hw_free (acquire the lock by spin_lock_irqsave) vfree --> may sleep To fix it, the "substream->runtime->dma_area" is passed to a temporary value, and mark it NULL when holding the lock. The memory is freed by vfree through the temporary value outside the lock holding. Signed-off-by:
-
Kevin Hilman authored
The current driver has a handful of hard-coded assumptions based on its primary use for capture of video signals. Cleanup those assumptions, and also query the subdev for format information and use that if available. Tested with 10-bit raw bayer input (SGRBG10) using the aptina,mt9v032 sensor, and also tested that composite video input still works from ti,tvp514x decoder. Both tests done on the da850-evm board with the add-on UI board. NOTE: Will need further testing for other sensors with different bus formats. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Kevin Hilman authored
Enable getting of subdevs from DT ports and endpoints. The _get_pdata() function was larely inspired by (i.e. stolen from) am437x-vpfe.c Signed-off-by:
-
Kevin Hilman authored
Capture driver silently overrides pixel format with a hack (according to the comments) to pass v4l2 compliance tests. This isn't needed for normal functionality, and works for composite video and raw camera capture without. In addition, the hack assumes that it only supports raw capture with a single format (SBGGR8) which isn't true. VPIF can also capture 10- and 12-bit raw formats as well. Forthcoming patches will enable VPIF input with raw-camera support and has been tested with 10-bit format from the aptina,mt9v032 sensor. Any compliance failures should be fixed with a real fix. Signed-off-by:
-
Anton Blanchard authored
The ir-spi driver has 2 issues which prevents it from working with lirc: 1. The ir-spi driver uses 16 bits of SPI data to create one cycle of the waveform. As such our SPI clock needs to be 16x faster than the carrier frequency. The driver is inconsistent in how it currently handles this. It initializes it to the carrier frequency: But the commit message has some example code which initialises it to 16x the carrier frequency: val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); To maintain compatibility with lirc, always do the frequency adjustment in the driver. 2. lirc presents pulses in microseconds, but the ir-spi driver treats them as cycles of the carrier. Similar to other lirc drivers, do the conversion with DIV_ROUND_CLOSEST(). Fixes: fe052da4 ("[media] rc: add support for IR LEDs driven through SPI") Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
Drop a since commit e1159cb3 ("[media] mceusb: remove pointless mce_flush_rx_buffer function") redundant reinitialisation of two urb fields immediately after they have been initialised. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
Fix urb and transfer-buffer leaks in an urb-submission error path which may be hit when a device is disconnected. Fixes: 66e89522 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable <stable@vger.kernel.org> # 2.6.36 Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Dave Stevenson authored
interrupts is listed as an optional property in the DT binding, but in reality the driver didn't work without it. The existing driver relied on having the interrupt line connected to the SoC to trigger handling various events. Add the option to poll the interrupt status register via a timer if no interrupt source is defined. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
-
Dave Stevenson authored
Previously the mbus_fmt_code was set after the device was registered. If a connected sub-device called tc358743_get_fmt prior to that point it would get an invalid code back. Signed-off-by:
-
Dave Stevenson authored
There was no way to query the supported mbus formats from this driver. enum_mbus_code is the function to expose that, so implement it. Signed-off-by:
-
Hans Verkuil authored
- use __func__ instead of writing the full function name - drop debug message in cec_config_log_addr since the same information will be reported later - use debug level 1 for errors and infrequent events, use level 2 for debugging CEC message traffic - log when a transmit is retried, very useful to know when debugging - debug messages now all start with lower case Signed-off-by:
-
Arvind Yadav authored
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Sakari Ailus authored
The mutex that was initialised in v4l2_ctrl_handler_init_class() was not destroyed in v4l2_ctrl_handler_free(). Do that. Additionally, explicitly refer to the ctrl handler's mutex in mutex initialisation for clarity. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Sometimes the caller is already holding the control handler mutex and using it to serialise something. Provide an unlocked variant of the same function to be used in those cases. Signed-off-by:
-
Hugues Fruchet authored
Ensure that ISI is clocked before starting sensor sub device. Remove un-needed type check in try_fmt(). Use clamp() macro for hardware capabilities. Fix wrong tabulation to space. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
media fixes for v4.12-rc4 * tag 'media/v4.12-2': (598 commits) [media] rc-core: race condition during ir_raw_event_register() [media] cec: drop MEDIA_CEC_DEBUG [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER [media] cec: select CEC_CORE instead of depend on it [media] rainshadow-cec: ensure exit_loop is intialized [media] atomisp: don't treat warnings as errors Linux 4.12-rc3 x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release() ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition PCI/msi: fix the pci_alloc_irq_vectors_affinity stub blk-mq: Only register debugfs attributes for blk-mq queues x86/timers: Move simple_udelay_calibration past init_hypervisor_platform ... Signed-off-by:
-
- 06 Jun, 2017 1 commit
-
-
Steven Toth authored
Avoid a double fetch by reusing the values from the prior transfer. Originally reported via https://bugzilla.kernel.org/show_bug.cgi?id=195559 Thanks to Pengfei Wang <wpengfeinudt@gmail.com> for reporting. Signed-off-by:
Steven Toth <stoth@kernellabs.com> Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Signed-off-by:
-
