Skip to content

L
linux
Switch branch/tag
  1. 03 Jul, 2017 28 commits
  3. 02 Jul, 2017 1 commit
  5. 01 Jul, 2017 11 commits
    • David S. Miller's avatar
      Merge branch 'bpf-Add-support-for-sock_ops' · bcdb239b
      David S. Miller authored 
      Lawrence Brakmo says:

====================
bpf: Add support for sock_ops

Created a new BPF program type, BPF_PROG_TYPE_SOCK_OPS, and a corresponding
struct that allows BPF programs of this type to access some of the
socket's fields (such as IP addresses, ports, etc.) and setting
connection parameters such as buffer sizes, initial window, SYN/SYN-ACK
RTOs, etc.

Unlike current BPF program types that expect to be called at a particular
place in the network stack code, SOCK_OPS program can be called at
different places and use an "op" field to indicate the context. There
are currently two types of operations, those whose effect is through
their return value and those whose effect is through the new
bpf_setsocketop BPF helper function.

Example operands of the first type are:
  BPF_SOCK_OPS_TIMEOUT_INIT
  BPF_SOCK_OPS_RWND_INIT
  BPF_SOCK_OPS_NEEDS_ECN

Example operands of the secont type are:
  BPF_SOCK_OPS_TCP_CONNECT_CB
  BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB
  BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB

Current operands are only called during connection establishment so
there should not be any BPF overheads after connection establishment. The
main idea is to use connection information form both hosts, such as IP
addresses and ports to allow setting of per connection parameters to
optimize the connection's peformance.

Alghough there are already 3 mechanisms to set parameters (sysctls,
route metrics and setsockopts), this new mechanism provides some
disticnt advantages. Unlike sysctls, it can set parameters per
connection. In contrast to route metrics, it can also use port numbers
and information provided by a user level program. In addition, it could
set parameters probabilistically for evaluation purposes (i.e. do
something different on 10% of the flows and compare results with the
other 90% of the flows). Also, in cases where IPv6 addresses contain
geographic information, the rules to make changes based on the distance
(or RTT) between the hosts are much easier than route metric rules and
can be global. Finally, unlike setsockopt, it does not require
application changes and it can be updated easily at any time.

It uses the existing bpf cgroups infrastructure so the programs can be
attached per cgroup with full inheritance support. Although the bpf cgroup
framework already contains a sock related program type (BPF_PROG_TYPE_CGROUP_SOCK),
I created the new type (BPF_PROG_TYPE_SOCK_OPS) beccause the existing type
expects to be called only once during the connections's lifetime. In contrast,
the new program type will be called multiple times from different places in the
network stack code.  For example, before sending SYN and SYN-ACKs to set
an appropriate timeout, when the connection is established to set congestion
control, etc. As a result it has "op" field to specify the type of operation
requested.

This patch set also includes sample BPF programs to demostrate the differnet
features.

v2: Formatting changes, rebased to latest net-next

v3: Fixed build issues, changed socket_ops to sock_ops throught,
    fixed formatting issues, removed the syscall to load sock_ops
    program and added functionality to use existing bpf attach and
    bpf detach system calls, removed reader/writer locks in
    sock_bpfops.c (used when saving sock_ops global program)
    and fixed missing module refcount increment.

v4: Removed global sock_ops program and instead used existing cgroup bpf
    infrastructure to support a new BPF_CGROUP_ATTCH type.

v5: fixed kbuild warning happening in bpf-cgroup.h
    removed automatic converstion to host byte order from some sock_ops
      fields (ipv4 and ipv6 addresses, remote port)
    Added conversion to host byte order in some of the sample programs
    Added to sample BPF program comments about using load_sock_ops to load
    Removed is_req_sock field from bpf_sock_ops_kern and related places,
      using sk_fullsock() instead.

v6: fixes to BPF helper function setsockopt (possible NULL deferencing, etc.)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bcdb239b
    • Lawrence Brakmo's avatar
      bpf: update tools/include/uapi/linux/bpf.h · 04df41e3
      Lawrence Brakmo authored 
      Update tools/include/uapi/linux/bpf.h to include changes related to new
bpf sock_ops program type.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04df41e3
    • Lawrence Brakmo's avatar
      bpf: Sample bpf program to set sndcwnd clamp · 6c4a01b2
      Lawrence Brakmo authored 
      Sample BPF program, tcp_clamp_kern.c, to demostrate the use
of setting the sndcwnd clamp. This program assumes that if the
first 5.5 bytes of the host's IPv6 addresses are the same, then
the hosts are in the same datacenter and sets sndcwnd clamp to
100 packets, SYN and SYN-ACK RTOs to 10ms and send/receive buffer
sizes to 150KB.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6c4a01b2
    • Lawrence Brakmo's avatar
      bpf: Adds support for setting sndcwnd clamp · 13bf9641
      Lawrence Brakmo authored 
      Adds a new bpf_setsockopt for TCP sockets, TCP_BPF_SNDCWND_CLAMP, which
sets the initial congestion window. It is useful to limit the sndcwnd
when the host are close to each other (small RTT).
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13bf9641
    • Lawrence Brakmo's avatar
      bpf: Sample BPF program to set initial cwnd · 7bc62e28
      Lawrence Brakmo authored 
      Sample BPF program that assumes hosts are far away (i.e. large RTTs)
and sets initial cwnd and initial receive window to 40 packets,
send and receive buffers to 1.5MB.

In practice there would be a test to insure the hosts are actually
far enough away.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7bc62e28
    • Lawrence Brakmo's avatar
      bpf: Adds support for setting initial cwnd · fc747810
      Lawrence Brakmo authored 
      Adds a new bpf_setsockopt for TCP sockets, TCP_BPF_IW, which sets the
initial congestion window. This can be used when the hosts are far
apart (large RTTs) and it is safe to start with a large inital cwnd.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc747810
    • Lawrence Brakmo's avatar
      bpf: Sample BPF program to set congestion control · bb56d444
      Lawrence Brakmo authored 
      Sample BPF program that sets congestion control to dctcp when both hosts
are within the same datacenter. In this example that is assumed to be
when they have the first 5.5 bytes of their IPv6 address are the same.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb56d444
    • Lawrence Brakmo's avatar
      bpf: Add support for changing congestion control · 91b5b21c
      Lawrence Brakmo authored 
      Added support for changing congestion control for SOCK_OPS bpf
programs through the setsockopt bpf helper function. It also adds
a new SOCK_OPS op, BPF_SOCK_OPS_NEEDS_ECN, that is needed for
congestion controls, like dctcp, that need to enable ECN in the
SYN packets.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91b5b21c
    • Lawrence Brakmo's avatar
      bpf: Sample BPF program to set buffer sizes · d9925368
      Lawrence Brakmo authored 
      This patch contains a BPF program to set initial receive window to
40 packets and send and receive buffers to 1.5MB. This would usually
be done after doing appropriate checks that indicate the hosts are
far enough away (i.e. large RTT).
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9925368
    • Lawrence Brakmo's avatar
      bpf: Add TCP connection BPF callbacks · 9872a4bd
      Lawrence Brakmo authored 
      Added callbacks to BPF SOCK_OPS type program before an active
connection is intialized and after a passive or active connection is
established.

The following patch demostrates how they can be used to set send and
receive buffer sizes.
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9872a4bd
    • Lawrence Brakmo's avatar
      bpf: Add setsockopt helper function to bpf · 8c4b4c7e
      Lawrence Brakmo authored 
      Added support for calling a subset of socket setsockopts from
BPF_PROG_TYPE_SOCK_OPS programs. The code was duplicated rather
than making the changes to call the socket setsockopt function because
the changes required would have been larger.

The ops supported are:
  SO_RCVBUF
  SO_SNDBUF
  SO_MAX_PACING_RATE
  SO_PRIORITY
  SO_RCVLOWAT
  SO_MARK
Signed-off-by: default avatarLawrence Brakmo <brakmo@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8c4b4c7e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7