- 09 May, 2006 7 commits
-
-
Alan Stern authored
The choose_configuration() routine contains code the determine the device's power source, so that configurations requiring external power can be ruled out if the device is running on bus power. Unfortunately it turns out that some devices have errors in their config descriptors and other devices don't like the GET_DEVICE_STATUS request. Since that information wasn't used for anything else, this patch (as673) removes the code, leaving only a comment. It fixes bugzilla entry #6448. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This fixes a small regression in USB controller power usage for many OHCI controllers, notably including every non-PCI version of OHCI: on those systems, the runtime autosuspend mechanism is no longer enabled. The change moves to saner defaults. All root hubs are expected to handle remote wakeup (and hence autosuspend), although drivers for buggy silicon may override that default. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Teach "pegasus" to handle a few of the disconnect fault paths without hundreds of usless syslog messages. Handle the carrier check workqueue entry even if the driver has not been opened. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Duncan Sands authored
Because of the way stringify works, using an expression like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024 turning up in the modinfo output instead of 65536. So use 65536 directly (this was the only way I found of fixing this). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Duncan Sands authored
The maximum possible bandwidth for a speedtouch modem is about 7Mbaud. You can only get this by using isochronous urbs (enable_isoc=1) and altsetting 3. With the current default altsetting of 2, the modem maxes out at about 4Mbaud. So change the default altsetting to 3 when using isochronous urbs. It would be nice to base the altsetting on the detected line speed, but that's hard given the current design. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
A loop on a power-lost resume path used the wrong index. I suspect khubd has been working around such bugs. Noticed by Andreas Mohr <andi@rhlx01.fht-esslingen.de>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
git://oss.sgi.com:8090/xfs-2.6Linus Torvalds authored
* git://oss.sgi.com:8090/xfs-2.6: [XFS] Fix a possible metadata buffer (AGFL) refcount leak when fixing an [XFS] Fix a project quota space accounting leak on rename. [XFS] Fix a possible forced shutdown due to mishandling write barriers
-
- 08 May, 2006 16 commits
-
-
Linus Torvalds authored
This reverts commit c8d8b837, which caused problems for the x86 build. Quoth Sam: "It was discussed on mips list but apparently the fix was bogus. I will not have time to look into it so mips can carry this local fix until we get a proper fix in mainline." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
Taking the cpu hotplug semaphore in a normal events workqueue is unsafe because other tasks can wait for any workqueues with it hold. This results in a deadlock. Move the DBS timer into its own work queue which is not affected by other work queue flushes to avoid this. Has been acked by Venkatesh. Cc: venkatesh.pallipadi@intel.com Cc: cpufreq@lists.linux.org.uk Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
Based on analysis&patch from Robert Hentosch Observed on a Dell PE6850 with 16GB The problem occurs very early on, when the kernel allocates space for the temporary memory map called bootmap. The bootmap overlaps the EBDA region. EBDA region is not historically reserved in the e820 mapping. When the bootmap is freed it marks the EBDA region as usable. If you notice in setup.c there is already code to work around the EBDA in reserve_ebda_region(), this check however occurs after the bootmap is allocated and doesn't prevent the bootmap from using this range. AK: I redid the original patch. Thanks also to Jan Beulich for spotting some mistakes. Cc: Robert_Hentosch@dell.com Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
Playing with NMI watchdog on x86_64, I discovered that it didn't do what I expected. It always panic-ed, even when it didn't happen from interrupt context. This patch solves that problem for me. Also, in this case, do_exit() will be called with interrupts disabled, I believe. Would it be wise to also call local_irq_enable() after nmi_exit()? [Yes I added it -AK] Currently, on x86_64, any NMI watchdog timeout will cause a panic because the irq count will always be set to be in an interrupt when do_exit() is called from die_nmi(). If we add nmi_exit() to the die_nmi() call (since the nmi will never exit "normally") it seems to solve this problem. The following small program can be used to trigger the NMI watchdog to reproduce this: main () { iopl(3); for (;;) asm("cli"); } Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
I noticed this when poking around in this area. The oops_begin() function in x86_64 would only conditionally claim the die_lock if the call is nested, but oops_end() would always release the spinlock. This patch adds a nest count for the die lock so that the release of the lock is only done on the final oops_end(). Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
The IOMMU code can only deal with 8 northbridges. Error out when more are found. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kimball Murray authored
The patch addresses a problem with ACPI SCI interrupt entry, which gets re-used, and the IRQ is assigned to another unrelated device. The patch corrects the code such that SCI IRQ is skipped and duplicate entry is avoided. Second issue came up with VIA chipset, the problem was caused by original patch assigning IRQs starting 16 and up. The VIA chipset uses 4-bit IRQ register for internal interrupt routing, and therefore cannot handle IRQ numbers assigned to its devices. The patch corrects this problem by allowing PCI IRQs below 16. Cc: len.brown@intel.com Signed-off by: Natalie Protasevich <Natalie.Protasevich@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] remove asm-ia64/bitops.h self-inclusion [IA64] strcpy returns NULL pointer and not destination pointer
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA] irda-usb: use NULL instead of 0 [IPV4]: Remove likely in ip_rcv_finish() [NET]: Create netdev attribute_groups with class_device_add [CLASS DEVICE]: add attribute_group creation
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: Do not overwrite makefile as anohter user kbuild: drivers/video/logo/ - fix ident glitch kbuild: fix gen_initramfs_list.sh kbuild modpost - relax driver data name kbuild: removing .tmp_versions considered harmful kbuild: fix modpost segfault for 64bit mipsel kernel
-
Trond Myklebust authored
It is insane to be giving lease_init() the task of freeing the lock it is supposed to initialise, given that the lock is not guaranteed to be allocated on the stack. This causes lockups in fcntl_setlease(). Problem diagnosed by Daniel Hokka Zakrisson <daniel@hozac.com> Also fix a slab leak in __setlease() due to an uninitialised return value. Problem diagnosed by Björn Steinbrink. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Daniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Nathan Scott authored
AG freelist. SGI-PV: 952681 SGI-Modid: xfs-linux-melb:xfs-kern:25902a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Nathan Scott authored
SGI-PV: 951636 SGI-Modid: xfs-linux-melb:xfs-kern:25811a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Nathan Scott authored
with remount,ro. SGI-PV: 951944 SGI-Modid: xfs-linux-melb:xfs-kern:25742a Signed-off-by: Nathan Scott <nathans@sgi.com>
-
Jan Beulich authored
Change the conditional of the outputmakefile rule to be evaluated entirely in make, and add a conditional to not touch the generated makefile when e.g. running 'make install' as root while the build was done as non-root. Also adjust the comment describing this, and move the message printing and redirection to mkmakefile. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3507/1: Replace map_desc.physical with map_desc.pfn: aaed2000 [ARM] 3506/1: aaec2000: debug-macro.S needs hardware.h [ARM] 3505/1: aaec2000: entry-macro.S needs asm/arch/irqs.h [ARM] 3504/1: Fix clcd includes for aaec2000 [ARM] 3503/1: Fix map_desc structure for aaec2000 [ARM] 3501/1: i.MX: fix lowlevel debug macros [ARM] rtc-sa1100: fix compiler warnings and error cleanup [ARM] Allow SA1100 RTC alarm to be configured for wakeup
-
- 07 May, 2006 11 commits
-
-
Bellido Nicolas authored
Patch from Bellido Nicolas aaed2000 map_desc.pfn conversion Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Bellido Nicolas authored
Patch from Bellido Nicolas Include hardware.h in debug-macro.S, otherwise io_p2v is undefined. Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Bellido Nicolas authored
Patch from Bellido Nicolas Since git commit 2b78838842346da390e8547cd37035184376d506, entry-macro.S needs to include asm/arch/irqs.h Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Bellido Nicolas authored
Patch from Bellido Nicolas Since this patch: [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register linux/amba/bus.h needs to be included before linux/amba/clcd.h Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Bellido Nicolas authored
Patch from Bellido Nicolas Patch: [ARM] 2982/1: Replace map_desc.physical with map_desc.pfn: aaec2000 incorrectly expanded the struct map_desc for aaec2000. Signed-off-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Sascha Hauer authored
Patch from Sascha Hauer This patch fixes the addruart macro to work with both mmu enabled and disabled. Signed-off-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
This holds the task lock (and, for ptrace_attach, the tasklist_lock) over the actual attach event, which closes a race between attacking to a thread that is either doing a PTRACE_TRACEME or getting de-threaded. Thanks to Oleg Nesterov for reminding me about this, and Chris Wright for noticing a lost return value in my first version. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Use NULL instead of 0 for a null pointer value (sparse warning): drivers/net/irda/irda-usb.c:1781:30: warning: Using plain integer as NULL pointer Also, correct timeout argument to use milliseconds instead of jiffies. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hua Zhong authored
This is another result from my likely profiling tool (dwalker@mvista.com just sent the patch of the profiling tool to linux-kernel mailing list, which is similar to what I use). On my system (not very busy, normal development machine within a VMWare workstation), I see a 6/5 miss/hit ratio for this "likely". Signed-off-by: Hua Zhong <hzhong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Atomically create attributes when class device is added. This avoids the race between registering class_device (which generates hotplug event), and the creation of attribute groups. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Extend the support of attribute groups in class_device's to allow groups to be created as part of the registration process. This allows network device's to avoid race between registration and creating groups. Note that unlike attributes that are a property of the class object, the groups are a property of the class_device object. This is done because there are different types of network devices (wireless for example). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 May, 2006 6 commits
-
-
Russell King authored
Fix: drivers/rtc/rtc-sa1100.c: In function `sa1100_rtc_proc': drivers/rtc/rtc-sa1100.c:298: warning: unsigned int format, long unsigned int arg (arg 3) and arrange for sa1100_rtc_open() to pass the devid to free_irq() rather than NULL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The SA1100 RTC alarm can be configured to wake up the CPU from sleep mode, and the RTC driver has been using the API to configure this mode. Unfortunately, the code was which sets the required bit in the hardware was missing. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
John Heffner authored
Xiaoliang (David) Wei wrote: > Hi gurus, > > I am reading the code of tcp_highspeed.c in the kernel and have a > question on the hstcp_cong_avoid function, specifically the following > AI part (line 136~143 in net/ipv4/tcp_highspeed.c ): > > /* Do additive increase */ > if (tp->snd_cwnd < tp->snd_cwnd_clamp) { > tp->snd_cwnd_cnt += ca->ai; > if (tp->snd_cwnd_cnt >= tp->snd_cwnd) { > tp->snd_cwnd++; > tp->snd_cwnd_cnt -= tp->snd_cwnd; > } > } > > In this part, when (tp->snd_cwnd_cnt == tp->snd_cwnd), > snd_cwnd_cnt will be -1... snd_cwnd_cnt is defined as u16, will this > small chance of getting -1 becomes a problem? > Shall we change it by reversing the order of the cwnd++ and cwnd_cnt -= > cwnd? Absolutely correct. Thanks. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ralf Baechle authored
There are out of date and don't tell the user anything useful. The similar messages which IPV4 and the core networking used to output were killed a long time ago. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Calling sock_orphan inside bh_lock_sock in dccp_close can lead to dead locks. For example, the inet_diag code holds sk_callback_lock without disabling BH. If an inbound packet arrives during that admittedly tiny window, it will cause a dead lock on bh_lock_sock. Another possible path would be through sock_wfree if the network device driver frees the tx skb in process context with BH enabled. We can fix this by moving sock_orphan out of bh_lock_sock. The tricky bit is to work out when we need to destroy the socket ourselves and when it has already been destroyed by someone else. By moving sock_orphan before the release_sock we can solve this problem. This is because as long as we own the socket lock its state cannot change. So we simply record the socket state before the release_sock and then check the state again after we regain the socket lock. If the socket state has transitioned to DCCP_CLOSED in the time being, we know that the socket has been destroyed. Otherwise the socket is still ours to keep. This problem was discoverd by Ingo Molnar using his lock validator. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
It makes sense to add this simple statistic to keep track of received multicast packets. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-