- 20 Sep, 2005 1 commit
-
-
Dave Kleikamp authored
The inode pointer may no longer be valid Signed-off-by:Dave Kleikamp <shaggy@austin.ibm.com>
-
- 16 Sep, 2005 1 commit
-
-
Dave Kleikamp authored
The fix in inode.c is a real bug. It could result in undeleted, yet unconnected files on big-endian hardware. The others are trivial. Signed-off-by:
-
- 13 Sep, 2005 38 commits
-
-
Andi Kleen authored
Fixes > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F > System.map 2. 6.14-rc1; fi > WARNING: /lib/modules/2.6.14-rc1/kernel/drivers/char/agp/amd64-agp.ko > needs unknown symbol end_pfn Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
fix up the runqueue lock owner only if we truly did a context-switch with the runqueue lock held. Impacts ia64, mips, sparc64 and arm. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Chuck Ebbert authored
Masked FPU exceptions should obviously not happen in the first place, but if they do, ignoring them seems to be the right thing to do. Although there is no documentation available for Cyrix MII, I did find erratum F-7 for Winchip C6, "FPU instruction may result in spurious exception under certain conditions" which seems to indicate that this can happen. That would also explain the behaviour Ondrej Zary reported on the MII. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Paul Mackerras authored
My patch "Separate pci bits out of struct device_node" (commit 1635317f) had the unfortunate side-effect that it stopped eeh_init() from working correctly. It needs the pointers set up by find_and_init_phbs(), but it was being called just before find_and_init_phbs(). That meant that we didn't enable EEH (pSeries PCI error recovery) on any devices, and that meant that on POWER5 systems, the hypervisor wouldn't let us enable memory or I/O space access to any devices, and their drivers got somewhat confused. This fixes it by moving the eeh_init call after find_and_init_phbs. Tested on a POWER5 partition. Signed-of-by:
Paul Mackerras <paulus@samba.org> Signed-of-by:
-
Jan Beulich authored
Like previously done for i386, get the x86_64 watchdog tick calculation into a state where it can also be used on CPUs with frequencies beyond 4GHz. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Randy Dunlap authored
As written in Documentation/feature-removal-schedule.txt, remove the io_remap_page_range() kernel API. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Tobias Klauser authored
Replace the custom CHAR_IS_NUM() macro with isdigit() from <linux/ctype.h> Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Acked-by:
"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Tobias Klauser authored
Replace the custom is_digit() macro with isdigit() from <linux/ctype.h> Signed-off-by:
-
Vivek Goyal authored
Added clarification on the root device format to be used for second kernel, as well as specifying initrd if drivers are built as modules. Signed-off-by:
Kishore Sampathkumar <kishore.sampathkumar@hp.com> Signed-off-by:
-
Pavel Machek authored
Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Randy Dunlap authored
Update Documentation/oops-tracing.txt: - add descriptions of 3 more "Tainted" flags; - fix some typos; Signed-off-by:
-
Jan Beulich authored
Some adjustments to the matroxfb code, for one part preventing the display to be disabled for longer than necessary, and for the other part to make information about the frame buffer position available so that a kernel debugger might obtain that before the initial mode change. Finally, some return code corrections to fit the generic fb code. Signed-off-by:
Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
Jan Beulich authored
const-ify the font control structures and data, to make somewhat better guarantees that these are not modified anywhere in the kernel. Specifically for a kernel debugger to share this information from the normal kernel code, such a guarantee seems rather desirable. Signed-off-by:
-
Jan Beulich authored
An adjustment to the SM_DOWN case of fbcon_scroll to match the behavior of SM_UP. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Bug fix for DViCO FusionHDTV5 Gold to avoid noise after frontend init. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
-
Mauro Carvalho Chehab authored
Adds all defines, ioctls and structs needed for the sliced VBI API VBI = Vertical Blank Interval. It is related with the way TV signals work. It sends a line, then, it has a retrace time to allow the tube to move electrons to the beginning of the next line. This was the main reason at the beginning of analog B&W TV. There is a lot of bandwidth lost on VBI. So, lots of TV systems use it to send other information such as Closed Captions and Teletext. Also, broadcasters uses this as a channel to exchange information from the content producer to their subsidiaries at each city. There's already a raw VBI interface on V4L2 api, used for Closed Captions and Teletext. The decoding is doing at userlevel space and it is mostly for analog TV signals, non encoded. Encoded signals (MPEG, for example), may need also to transmit other information (like, for example, display aspect, i.e. 4x3, widescreen...). Sliced VBI interface is a method to allow the video stream to transmit this kind of information. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Neil Brown authored
Change a printk(KERN_WARNING to dprintk, and it is really only interesting when trying to debug a problem, and can occur normally without error. Remove various gratuitous gotos in surrounding code, and remove some type-cast assignments from inside 'if' conditionals, as that is just obscuring what it going on. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Neil Brown authored
We could try to unlock the state lock here without having first locked it. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
-
Neil Brown authored
In the case of a lock which introduces a new lockowner, the openowner's sequence id should be incremented, even when the operation fails, if the error is a sequence-id-mutating error. The current code fails to do that in some cases. Fix this by using the same sequence-id-incrementing mechanism that all other such operations use. Signed-off-by:
-
Neil Brown authored
It seems more natural to move the setting of the replay_owner into the relevant procedure instead of doing it in nfsv4_proc_compound. Signed-off-by:
-
Neil Brown authored
Demote some printk's that look like they could be triggered by non-buggy clients to dprintk's. (For example, stale clientid's are normal occurrences on reboot, and on a server with a lot of clients these messages could become annoying.) Also remove some redundant dprintk's (e.g. no need for both STALE_CLIENTID and its callers to do dprintks). Signed-off-by:
-
Richard Purdie authored
Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz, Akita, Borzoi). Its based on corgikbd but there are enough subtle differences to justify a separate driver. Signed-Off-by:
Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Richard Purdie authored
Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by:
-
Richard Purdie authored
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi backlight driver. Abstract model/machine specific functions to corgi_lcd.c via sharpsl.h This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Richard Purdie authored
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Richard Purdie authored
The same LCD is present on both the Sharp Zaurus c7x0 series and the cxx00 but with different framebuffer drivers (w100fb vs. pxafb). This patch adds support for the cxx00 series to the LCD driver. It also adds some LCD to touchscreen interface logic needed by the touchscreen driver to prevent interference problems, the idea being to keep all the ugly code in one place leaving the drivers themselves clean. sharpsl.h is used to provide the abstraction. Signed-Off-by:
-
Richard Purdie authored
Sharp's newer range of Zaurus clamshell handhelds, the cxx00's are similar to the c7x0 series yet different. This patch series abstracts the differences and generates a set of common drivers that support both series of devices. It then adds machine support for Spitz (SL-C3000) and Borzoi (SL-C3100). Hooks for Akita (SL-C1000) differences are also added. The I2C driver for its IO expander is the only missing piece. This patch: Separate out the Sharp Zaurus c7x0 series specific code from corgi_ssp.c so that other models such as the cxx00's can share it. Create sharpsl.h which will be used to abstract machine/model specifics. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Peter Osterlund authored
Remove some redundant BUG_ON() statements in pktcdvd and move one run-time check to compile-time. Signed-off-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Peter Osterlund authored
Use kcalloc and kzalloc in pktcdvd. Signed-off-by:
-
Peter Osterlund authored
In the /proc statistics, only count writes that upper layers have requested. Don't count additional writes created inside the packet driver to satisfy the requirement to only write full packets. Signed-off-by:
-
Peter Osterlund authored
Update the "theory of operation" description. Signed-off-by:
-
Peter Osterlund authored
In the packet writing driver, if the drive reports a packet size larger than the driver can handle, bail out safely instead of triggering a BUG_ON. Signed-off-by:
-
Mike Miller authored
Add SCSI host and device info not elsewhere available to /proc/scsi/cciss/* Namely, connect cciss device instance with scsi host number, and give scsi host number, bus, target, lun, devicetype, and 8-byte cciss LUNID for each tapedrive/medium changer attached to a controller For instance: # cat /proc/scsi/cciss/2 cciss0: SCSI host: 2 c2b0t0l0 01 0x0000000000000001 Signed-off-by:
Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Mike Miller authored
This patch adds support for "One Button Disaster Recovery" devices to the cciss driver. (OBDR devices are tape drives which can pretend to be cd-rom devices temporarily. Once booted the device can be reverted to a tape drive and data recovery operations can be automatically begun.) This is an enhancement request by a vendor/partner working on One Button Disaster Recovery. Signed-off-by:
-
