- 29 Sep, 2010 2 commits
-
-
Steven Whitehouse authored
XFS supports the "norecovery" mount option which is basically the same as the GFS2 spectator mode. This adds support for "norecovery" as a synonym for spectator mode, which is hopefully a more obvious description of what it actually does. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
The tests further down the recovery function relating to unlocking the journal need to be updated to match the intial test. Also, a test in the umount code which was surplus to requirements has been removed. Umounting spectator mounts now works correctly, as expected. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 28 Sep, 2010 2 commits
-
-
Steven Whitehouse authored
This shouldn't really be required, but gcc can't tell that "al" is only accessed when initialised. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Benjamin Marzinski authored
Some of the functions in GFS2 were not reserving space in the transaction for the resource group header and the resource groups bitblocks that get added when you do allocation. GFS2 now makes sure to reserve space for the resource group header and either all the bitblocks in the resource group, or one for each block that it may allocate, whichever is smaller using the new gfs2_rg_blocks() inline function. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 27 Sep, 2010 1 commit
-
-
Steven Whitehouse authored
When checking journals for spectator mounts, we cannot rely on the journal being locked, whatever its jid might be. This patch ensures that we always get the journal locks when checking journals for a spectator mount. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 24 Sep, 2010 1 commit
-
-
Steven Whitehouse authored
This option has never done anything useful. Also at the same time this cleans up the sb checks which are done at mount time. The debug option will be accepted, but ignored in future. Since it didn't do anything, there didn't seem much point in retaining it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 23 Sep, 2010 2 commits
-
-
Steven Whitehouse authored
This option defaulted to on for lock_nolock mounts and off otherwise. The only function was to avoid the revalidation of dentries. In the cluster case, that is entirely pointless and liable to cause coherency problems. The patch changes the revalidation to depend upon whether the fs is a local or cluster fs (i.e. it follows the existing default behaviour). I very much doubt anybody ever used this option as there is no reason to. Even so we will continue to accept it on the mount command line, but ignore it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
This is been a no-op for a very long time now. I'm pretty sure nobody uses it, but just in case we'll still accept it on the command line, but ignore it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
- 20 Sep, 2010 10 commits
-
-
Steven Whitehouse authored
Rather than calculating the qstrs for . and .. each time we need them, its better to keep a constant version of these and just refer to them when required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Christoph Hellwig <hch@infradead.org>
-
Steven Whitehouse authored
The recovery workqueue can be freezable since we want it to finish what it is doing if the system is to be frozen (although why you'd want to freeze a cluster node is beyond me since it will result in it being ejected from the cluster). It does still make sense for single node GFS2 filesystems though. The glock workqueue will benefit from being able to run more work items concurrently. A test running postmark shows improved performance and multi-threaded workloads are likely to benefit even more. It needs to be high priority because the latency directly affects the latency of filesystem glock operations. The delete workqueue is similar to the recovery workqueue in that it must not get blocked by memory allocations, and may run for a long time. Potentially other GFS2 threads might also be converted to workqueues, but I'll leave that for a later patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Tejun Heo <tj@kernel.org>
-
Steven Whitehouse authored
GFS2's idea of which return codes it needs to handle was based upon those listed in dlm.h. Those didn't cover all the possible codes and listed some which never happen. This updates GFS2 to handle all the codes which can actually be returned from the DLM under various circumstances. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
Due to the design of the VFS, it is quite usual for operations on GFS2 to consist of a lookup (requiring a shared lock) followed by an operation requiring an exclusive lock. If a remote node has cached an exclusive lock, then it will receive two demote events in rapid succession firstly for a shared lock and then to unlocked. The existing min hold time code was triggering in this case, even if the node was otherwise idle since the state change time was being updated by the initial demote. This patch introduces logic to skip the min hold timer in the case that a "double demote" of this kind has occurred. The min hold timer will still be used in all other cases. A new glock flag is introduced which is used to keep track of whether there have been any newly queued holders since the last glock state change. The min hold time is only applied if the flag is set. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Tested-by: Abhijith Das <adas@redhat.com>
-
Steven Whitehouse authored
Removes the offending space Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Benjamin Marzinski authored
This patch adds support for fallocate to gfs2. Since the gfs2 does not support uninitialized data blocks, it must write out zeros to all the blocks. However, since it does not need to lock any pages to read from, gfs2 can write out the zero blocks much more efficiently. On a moderately full filesystem, fallocate works around 5 times faster on average. The fallocate call also allows gfs2 to add blocks to the file without changing the filesize, which will make it possible for gfs2 to preallocate space for the rindex file, so that gfs2 can grow a completely full filesystem. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
This adds a check to ensure that if we reach the block allocator that we don't try and proceed if there is no alloc structure hanging off the inode. This should only happen if there is a bug in GFS2. The error return code is distinctive in order that it will be easily spotted. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
I think the time has arrvied to remove the experimental tag from GFS2. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
With the update of the truncate code, ip->i_disksize and inode->i_size are merely copies of each other. This means we can remove ip->i_disksize and use inode->i_size exclusively reducing the size of a GFS2 inode by 8 bytes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
This updates GFS2's truncate code to use the new truncate sequence correctly. This is a stepping stone to being able to remove ip->i_disksize in favour of using i_size everywhere now that the two sizes are always identical. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Christoph Hellwig <hch@lst.de>
-
- 19 Sep, 2010 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: deal with multiple simultaneously pending signals alpha: fix a 14 years old bug in sigreturn tracing alpha: unb0rk sigsuspend() and rt_sigsuspend() alpha: belated ERESTART_RESTARTBLOCK race fix alpha: Shift perf event pending work earlier in timer interrupt alpha: wire up fanotify and prlimit64 syscalls alpha: kill big kernel lock alpha: fix build breakage in asm/cacheflush.h alpha: remove unnecessary cast from void* in assignment. alpha: Use static const char * const where possible
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix ordering of procfs registry.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) dca: disable dca on IOAT ver.3.0 multiple-IOH platforms netpoll: Disable IRQ around RCU dereference in netpoll_rx sctp: Do not reset the packet during sctp_packet_config(). net/llc: storing negative error codes in unsigned short MAINTAINERS: move atlx discussions to netdev drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory drivers/net/eql.c: prevent reading uninitialized stack memory drivers/net/usb/hso.c: prevent reading uninitialized memory xfrm: dont assume rcu_read_lock in xfrm_output_one() r8169: Handle rxfifo errors on 8168 chips 3c59x: Remove atomic context inside vortex_{set|get}_wol tcp: Prevent overzealous packetization by SWS logic. net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS phylib: fix PAL state machine restart on resume net: use rcu_barrier() in rollback_registered_many bonding: correctly process non-linear skbs ipv4: enable getsockopt() for IP_NODEFRAG ipv4: force_igmp_version ignored when a IGMPv3 query received ppp: potential NULL dereference in ppp_mp_explode() net/llc: make opt unsigned in llc_ui_setsockopt() ...
-
Linus Torvalds authored
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410 ARM: S3C64XX: Fix coding style errors on mach-real6410 ARM: S3C64XX: Prototype SPI devices ARM: S3C64XX: Fix dev-spi build ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr ARM: SAMSUNG: Fix on drive strength value ARM: S5PV210: Add FIMC clocks ARM: S5PV210: Reduce the iodesc length of systimer ARM: S5PV210: Update I2C-1 Clock Register Property. ARM: S5P: Decrease IO Registers memory region size on FIMC ARM: S5P: Fix DMA coherent mask for FIMC
-
Jan Harkes authored
Coda's REQ_* defines were renamed to avoid clashes with the block layer (commit 4aeefdc6: "coda: fixup clash with block layer REQ_* defines"). However one was missed and response messages are no longer matched with requests and waiting threads are no longer woken up. This patch fixes this. Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> [ Also fixed up whitespace while at it -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Unlike the other targets, alpha sets _one_ sigframe and buggers off until the next syscall/interrupt, even if more signals are pending. It leads to quite a few unpleasant inconsistencies, starting with SIGSEGV potentially arriving not where it should and including e.g. mess with sigsuspend(); consider two pending signals blocked until sigsuspend() unblocks them. We pick the first one; then, if we are hit by interrupt while in the handler, we process the second one as well. If we are not, and if no syscalls had been made, we get out of the first handler and leave the second signal pending; normally sigreturn() would've picked it anyway, but here it starts with restoring the original mask and voila - the second signal is blocked again. On everything else we get both delivered consistently. It's actually easy to fix; the only thing to watch out for is prevention of double syscall restart. Fortunately, the idea I've nicked from arm fix by rmk works just fine... Testcase demonstrating the behaviour in question; on alpha we get one or both flags set (usually one), on everything else both are always set. #include <signal.h> #include <stdio.h> int had1, had2; void f1(int sig) { had1 = 1; } void f2(int sig) { had2 = 1; } main() { sigset_t set1, set2; sigemptyset(&set1); sigemptyset(&set2); sigaddset(&set2, 1); sigaddset(&set2, 2); signal(1, f1); signal(2, f2); sigprocmask(SIG_SETMASK, &set2, NULL); raise(1); raise(2); sigsuspend(&set1); printf("had1:%d had2:%d\n", had1, had2); } Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Al Viro authored
The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL, all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support. What happens is direct return to ret_from_syscall, in order to bypass mangling of a3 (error indicator) and prevent other mutilations of registers (e.g. by syscall restart). That's fine, but... the entire TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall stopping/notifying the tracer is after the syscall. And the normal path we are forcibly switching to doesn't have it. So we end up with *one* stop in traced sigreturn() vs. two in other syscalls. And yes, strace is visibly broken by that; try to strace the following #include <signal.h> #include <stdio.h> void f(int sig) {} main() { signal(SIGHUP, f); raise(SIGHUP); write(1, "eeeek\n", 6); } and watch the show. The close(1) = 405 in the end of strace output is coming from return value of write() (6 == __NR_close on alpha) and syscall number of exit_group() (__NR_exit_group == 405 there). The fix is fairly simple - the only thing we end up missing is the call of syscall_trace() and we can tell whether we'd been called from the SYSCALL_TRACE path by checking ra value. Since we are setting the switch_stack up (that's what sys_sigreturn() does), we have the right environment for calling syscall_trace() - just before we call undo_switch_stack() and return. Since undo_switch_stack() will overwrite s0 anyway, we can use it to store the result of "has it been called from SYSCALL_TRACE path?" check. The same thing applies in rt_sigreturn(). Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Al Viro authored
Old code used to set regs->r0 and regs->r19 to force the right return value. Leaving that after switch to ERESTARTNOHAND was a Bad Idea(tm), since now that screws the restart - if we hit the case when get_signal_to_deliver() returns 0, we will step back to syscall insn, with v0 set to EINTR and a3 to 1. The latter won't matter, since EINTR is 4, aka __NR_write. Testcase: #include <signal.h> #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> main() { sigset_t mask; sigemptyset(&mask); sigaddset(&mask, SIGCONT); sigprocmask(SIG_SETMASK, &mask, NULL); kill(0, SIGCONT); syscall(__NR_sigsuspend, 1, "b0rken\n", 7); } results on alpha in immediate message to stdout... Fix is obvious; moreover, since we don't need regs anymore, we can switch to normal prototypes for these guys and lose the wrappers. Even better, rt_sigsuspend() is identical to generic version in kernel/signal.c now. Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Al Viro authored
same thing as had been done on other targets back in 2003 - move setting ->restart_block.fn into {rt_,}sigreturn(). Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Michael Cree authored
Pending work from the performance event subsystem is executed in the timer interrupt. This patch shifts the call to perf_event_do_pending() before the call to update_process_times() as the latter may call back into the perf event subsystem and it is prudent to have the pending work executed first. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Mikael Pettersson authored
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on Alpha. Built and booted on an XP900. Untested beyond that. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Arnd Bergmann authored
All uses of the BKL on alpha are totally bogus, nothing is really protected by this. Remove the remaining users so we don't have to mark alpha as 'depends on BKL'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Tejun Heo authored
Alpha SMP flush_icache_user_range() is implemented as an inline function inside include/asm/cacheflush.h. It dereferences @current but doesn't include linux/sched.h and thus causes build failure if linux/sched.h wasn't included previously. Fix it by including the needed header file explicitly. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
matt mooney authored
Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
Joe Perches authored
Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
-
- 18 Sep, 2010 4 commits
-
-
Sosnowski, Maciej authored
Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms. This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Darius Augulis authored
Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver platform data in board mach-real6410. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Darius Augulis authored
Fix errors reported by checkpatch.pl script Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Mark Brown authored
Avoids build warnings due to the undeclared non-statics. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 17 Sep, 2010 3 commits
-
-
Herbert Xu authored
We cannot use rcu_dereference_bh safely in netpoll_rx as we may be called with IRQs disabled. We could however simply disable IRQs as that too causes BH to be disabled and is safe in either case. Thanks to John Linville for discovering this bug and providing a patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
sctp_packet_config() is called when getting the packet ready for appending of chunks. The function should not touch the current state, since it's possible to ping-pong between two transports when sending, and that can result packet corruption followed by skb overlfow crash. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: pcm - Fix race with proc files ALSA: pcm - Fix unbalanced pm_qos_request ALSA: HDA: Enable internal speaker on Dell M101z ALSA: patch_nvhdmi.c: Fix supported sample rate list. sound: Remove pr_<level> uses of KERN_<level> ALSA: hda - Add quirk for Toshiba C650D using a Conexant CX20585 ALSA: hda_intel: ALSA HD Audio patch for Intel Patsburg DeviceIDs
-