- 25 Apr, 2018 4 commits
-
-
Ming Lei authored
This reverts commit 37c7c6c7. Turns out some drivers(most are FC drivers) may not use managed IRQ affinity, and has their customized .map_queues meantime, so still keep this code for avoiding regression. Reported-by:
Laurence Oberman <loberman@redhat.com> Tested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Linus Walleij authored
As it came up in discussion on the mailing list that the semantic meaning of 'blk_mq_ctx' and 'blk_mq_hw_ctx' isn't completely obvious to everyone, let's add some minimal kerneldoc for a starter. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jens Axboe authored
Since Michael had to step back, Coly has agreed to be the new maintainer. Mark him as such. Signed-off-by: -
Michael Lyle authored
Too much to do with other projects. I've enjoyed working with everyone here, and hope to occasionally contribute on bcache. Signed-off-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
-
- 19 Apr, 2018 2 commits
-
-
Jiang Biao authored
The initializing of q->root_blkg is currently outside of queue lock and rcu, so the blkg may be destroied before the initializing, which may cause dangling/null references. On the other side, the destroys of blkg are protected by queue lock or rcu. Put the initializing inside the queue lock and rcu to make it safer. Signed-off-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Tejun Heo <tj@kernel.org> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jiang Biao authored
The comment before blkg_create() in blkcg_init_queue() was moved from blkcg_activate_policy() by commit ec13b1d6, but it does not suit for the new context. Signed-off-by:
-
- 18 Apr, 2018 3 commits
-
-
Jiang Biao authored
As described in the comment of blkcg_activate_policy(), *Update of each blkg is protected by both queue and blkcg locks so that holding either lock and testing blkcg_policy_enabled() is always enough for dereferencing policy data.* with queue lock held, there is no need to hold blkcg lock in blkcg_deactivate_policy(). Similar case is in blkcg_activate_policy(), which has removed holding of blkcg lock in commit 4c55f4f9. Signed-off-by:
-
Dave Chinner authored
So we can check FUA support status from the iomap direct IO code. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Dan Carpenter authored
This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned long. The way the check is written now, if one of the high 32 bits is set then we could read outside the info->slots[] array. This bug is pretty old and it predates git. Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 17 Apr, 2018 10 commits
-
-
Jens Axboe authored
Even if we don't have an IO context attached to a request, we still need to clear the priv[0..1] pointers, as they could be pointing to previously used bic/bfqq structures. If we don't do so, we'll either corrupt memory on dispatching a request, or cause an imbalance in counters. Inspired by a fix from Kees. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by:
Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Fixes: aee69d78 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Signed-off-by:
-
Jianchao Wang authored
rq->gstate and rq->aborted_gstate both are zero before rqs are allocated. If we have a small timeout, when the timer fires, there could be rqs that are never allocated, and also there could be rq that has been allocated but not initialized and started. At the moment, the rq->gstate and rq->aborted_gstate both are 0, thus the blk_mq_terminate_expired will identify the rq is timed out and invoke .timeout early. For scsi, this will cause scsi_times_out to be invoked before the scsi_cmnd is not initialized, scsi_cmnd->device is still NULL at the moment, then we will get crash. Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Martin Steigerwald <Martin@Lichtvoll.de> Cc: stable@vger.kernel.org Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Finn Thain authored
The driver supports internal and external FDD units so the floppy_open function must not hard-code the drive location. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
-
Finn Thain authored
Reading to the end of a 720K disk results in an IO error instead of EOF because the block layer thinks the disk has 2880 sectors. (Partly this is a result of inverted logic of the ONEMEG_MEDIA bit that's now fixed.) Initialize the density and head count in swim_add_floppy() to agree with the device size passed to set_capacity() during drive probe. Call set_capacity() again upon device open, after refreshing the density and head count values. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
The SWIM chip is compatible with GCR-mode Sony 400K/800K drives but this driver only supports MFM mode. Therefore only Sony FDHD drives are supported. Skip incompatible drives. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
The Sony drive status bits use active-low logic. The swim_readbit() function converts that to 'C' logic for readability. Hence, the sense of the names of the status bit macros should not be inverted. Mostly they are correct. However, the TWOMEG_DRIVE, MFM_MODE and TWOMEG_MEDIA macros have inverted sense (like MkLinux). Fix this inconsistency and make the following patches less confusing. The same problem affects swim3.c so fix that too. No functional change. The FDHD drive status bits are documented in sonydriv.cpp from MAME and in swimiii.h from MkLinux. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
The 'eject' shell command may send various different ioctl commands. This leads to error messages on the console even though the FDEJECT ioctl succeeds. ~# eject floppy SWIM floppy_ioctl: unknown cmd 21257 SWIM floppy_ioctl: unknown cmd 1 Don't log an error message for an invalid ioctl, just do as the swim3 driver does and return -ENOTTY. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 103db8b2 ("[PATCH] swim: stop sharing request queue across multiple gendisks") Tested-by:
-
Finn Thain authored
In the floppy_find() function in swim.c is a call to get_disk(swd->unit[drive].disk). The actual parameter to this call can be a NULL pointer when drive == swd->floppy_count. This causes an oops in get_disk(). Data read fault at 0x00000198 in Super Data (pc=0x1be5b6) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: swim_mod ipv6 mac8390 PC: [<001be5b6>] get_disk+0xc/0x76 SR: 2004 SP: 9a078bc1 a2: 0213ed90 d0: 00000000 d1: 00000000 d2: 00000000 d3: 000000ff d4: 00000002 d5: 02983590 a0: 02332e00 a1: 022dfd64 Process dd (pid: 285, task=020ab25b) Frame format=B ssw=074d isc=4a88 isb=6732 daddr=00000198 dobuf=00000000 baddr=001be5bc dibuf=bfffffff ver=f Stack from 022dfca4: 00000000 0203fc00 0213ed90 022dfcc0 02982936 00000000 00200000 022dfd08 0020f85a 00200000 022dfd64 02332e00 004040fc 00000014 001be77e 022dfd64 00334e4a 001be3f8 0800001d 022dfd64 01c04b60 01c04b70 022aba80 029828f8 02332e00 022dfd2c 001be7ac 0203fc00 00200000 022dfd64 02103a00 01c04b60 01c04b60 0200e400 022dfd68 000e191a 00200000 022dfd64 02103a00 0800001d 00000000 00000003 000b89de 00500000 02103a00 01c04b60 02103a08 01c04c2e Call Trace: [<02982936>] floppy_find+0x3e/0x4a [swim_mod] [<00200000>] uart_remove_one_port+0x1a2/0x260 [<0020f85a>] kobj_lookup+0xde/0x132 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<001be77e>] get_gendisk+0x0/0x130 [<00334e4a>] mutex_lock+0x0/0x2e [<001be3f8>] disk_block_events+0x0/0x6c [<029828f8>] floppy_find+0x0/0x4a [swim_mod] [<001be7ac>] get_gendisk+0x2e/0x130 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000e191a>] __blkdev_get+0x32/0x45a [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000b89de>] complete_walk+0x0/0x8a [<000e1e22>] blkdev_get+0xe0/0x29a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000b89de>] complete_walk+0x0/0x8a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000e01cc>] bd_acquire+0x74/0x8a [<000e205c>] blkdev_open+0x80/0xb0 [<000e1fdc>] blkdev_open+0x0/0xb0 [<000abf24>] do_dentry_open+0x1a4/0x322 [<00020000>] __do_proc_douintvec+0x22/0x27e [<000b89de>] complete_walk+0x0/0x8a [<000baa62>] link_path_walk+0x0/0x48e [<000ba3f8>] inode_permission+0x20/0x54 [<000ac0e4>] vfs_open+0x42/0x78 [<000bc372>] path_openat+0x2b2/0xeaa [<000bc0c0>] path_openat+0x0/0xeaa [<0004463e>] __irq_wake_thread+0x0/0x4e [<0003a45a>] task_tick_fair+0x18/0xc8 [<000bd00a>] do_filp_open+0xa0/0xea [<000abae0>] do_sys_open+0x11a/0x1ee [<00020000>] __do_proc_douintvec+0x22/0x27e [<000abbf4>] SyS_open+0x1e/0x22 [<00020000>] __do_proc_douintvec+0x22/0x27e [<00002b40>] syscall+0x8/0xc [<00020000>] __do_proc_douintvec+0x22/0x27e [<0000c00b>] dyadic+0x1/0x28 Code: 4e5e 4e75 4e56 fffc 2f0b 2f02 266e 0008 <206b> 0198 4a88 6732 2428 002c 661e 486b 0058 4eb9 0032 0b96 588f 4a88 672c 2008 Disabling lock debugging due to kernel taint Fix the array index bounds check to avoid this. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 8852ecd9 ("[PATCH] m68k: mac - Add SWIM floppy support") Tested-by: -
Finn Thain authored
For reasons I don't understand, calling ioremap() then iounmap() on the SWIM MMIO region causes a hang on 68030 (but not on 68040). ~# modprobe swim_mod SWIM floppy driver Version 0.2 (2008-10-30) SWIM device not found ! watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:285] Modules linked in: swim_mod(+) Format 00 Vector: 0064 PC: 000075aa Status: 2000 Not tainted ORIG_D0: ffffffff D0: d00c0000 A2: 007c2370 A1: 003f810c A0: 00040000 D5: d0096800 D4: d0097e00 D3: 00000001 D2: 00000003 D1: 00000000 Non-Maskable Interrupt Modules linked in: swim_mod(+) PC: [<000075ba>] __iounmap+0x24/0x10e SR: 2000 SP: 007abc48 a2: 007c2370 d0: d00c0000 d1: 000001a0 d2: 00000019 d3: 00000001 d4: d0097e00 d5: d0096800 a0: 00040000 a1: 003f810c Process modprobe (pid: 285, task=007c2370) Frame format=0 Stack from 007abc7c: ffffffed 00000000 006a4060 004712e0 007abca0 000076ea d0080000 00080000 010bb4b8 007abcd8 010ba542 d0096000 00000000 00000000 00000001 010bb59c 00000000 007abf30 010bb4b8 0047760a 0047763c 00477612 00616540 007abcec 0020a91a 00477600 0047760a 010bb4cc 007abd18 002092f2 0047760a 00333b06 007abd5c 00000000 0047760a 010bb4cc 00404f90 004776b8 00000001 007abd38 00209446 010bb4cc 0047760a 010bb4cc 0020938e 0031f8be 00616540 007abd64 Call Trace: [<000076ea>] iounmap+0x46/0x5a [<00080000>] shrink_page_list+0x7f6/0xe06 [<010ba542>] swim_probe+0xe4/0x496 [swim_mod] [<0020a91a>] platform_drv_probe+0x20/0x5e [<002092f2>] driver_probe_device+0x21c/0x2b8 [<00333b06>] mutex_lock+0x0/0x2e [<00209446>] __driver_attach+0xb8/0xce [<0020938e>] __driver_attach+0x0/0xce [<0031f8be>] klist_next+0x0/0xa0 [<00207562>] bus_for_each_dev+0x74/0xba [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00333b06>] mutex_lock+0x0/0x2e [<00208e44>] driver_attach+0x1a/0x1e [<0020938e>] __driver_attach+0x0/0xce [<00207e26>] bus_add_driver+0x188/0x234 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00209894>] driver_register+0x58/0x104 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<0020a7be>] __platform_driver_register+0x38/0x3c [<010bd028>] swim_init+0x28/0x2c [swim_mod] [<000020dc>] do_one_initcall+0x38/0x196 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<00075008>] __free_pages+0x0/0x38 [<000045c0>] mangle_kernel_stack+0x30/0xda [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<0005ced4>] do_init_module+0x42/0x266 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<0005eda0>] load_module+0x1a30/0x1e70 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00331c64>] __generic_copy_from_user+0x0/0x46 [<0033256e>] _cond_resched+0x0/0x32 [<00331b9c>] memset+0x0/0x98 [<0033256e>] _cond_resched+0x0/0x32 [<0005f25c>] SyS_init_module+0x7c/0x112 [<00002000>] _start+0x0/0x8 [<00002000>] _start+0x0/0x8 [<00331c82>] __generic_copy_from_user+0x1e/0x46 [<0005f2b2>] SyS_init_module+0xd2/0x112 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00002b40>] syscall+0x8/0xc [<0000465d>] mangle_kernel_stack+0xcd/0xda [<0008c00c>] pcpu_balance_workfn+0xb2/0x40e Code: 2200 7419 e4a9 e589 2841 d9fc 0000 1000 <2414> 7203 c282 7602 b681 6600 0096 0242 fe00 0482 0000 0000 e9c0 11c3 ed89 2642 There's no need to call ioremap() for the SWIM address range, as it lies within the usual IO device region at 0x5000 0000, which has already been mapped by head.S. Remove the redundant ioremap() and iounmap() calls to fix the hang. Cc: Laurent Vivier <lvivier@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
- 15 Apr, 2018 2 commits
-
-
Jens Axboe authored
We ran into an issue with loop and btrfs, where btrfs would complain about checksum errors. It turns out that is because we don't handle short reads at all, we just zero fill the remainder. Worse than that, we don't handle the filling properly, which results in loop trying to advance a single bio by much more than its size, since it doesn't take chaining into account. Handle short reads appropriately, by simply retrying at the new correct offset. End the remainder of the request with EIO, if we get a 0 read. Fixes: bc07c10a ("block: loop: support DIO & AIO") Reviewed-by:
-
Jens Axboe authored
We can always get at the request from the payload, no need to store a pointer to it. Reviewed-by:
-
- 14 Apr, 2018 1 commit
-
-
Alan Jenkins authored
When blk_queue_enter() waits for a queue to unfreeze, or unset the PREEMPT_ONLY flag, do not allow it to be interrupted by a signal. The PREEMPT_ONLY flag was introduced later in commit 3a0a5299 ("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI device is resumed asynchronously, i.e. after un-freezing userspace tasks. So that commit exposed the bug as a regression in v4.15. A mysterious SIGBUS (or -EIO) sometimes happened during the time the device was being resumed. Most frequently, there was no kernel log message, and we saw Xorg or Xwayland killed by SIGBUS.[1] [1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979 Without this fix, I get an IO error in this test: # dd if=/dev/sda of=/dev/null iflag=direct & \ while killall -SIGUSR1 dd; do sleep 0.1; done & \ echo mem > /sys/power/state ; \ sleep 5; killall dd # stop after 5 seconds The interruptible wait was added to blk_queue_enter in commit 3ef28e83 ("block: generic request_queue reference counting"). Before then, the interruptible wait was only in blk-mq, but I don't think it could ever have been correct. Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@vger.kernel.org Signed-off-by:
Alan Jenkins <alan.christopher.jenkins@gmail.com> Signed-off-by:
-
- 13 Apr, 2018 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: "In addition to bug fixes and cleanups there are two new features from Amir: - Consistent inode number support for the case when layers are not all on the same filesystem (feature is dubbed "xino"). - Optimize overlayfs file handle decoding. This one touches the exportfs interface to allow detecting the disconnected directory case" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: update documentation w.r.t "xino" feature ovl: add support for "xino" mount and config options ovl: consistent d_ino for non-samefs with xino ovl: consistent i_ino for non-samefs with xino ovl: constant st_ino for non-samefs with xino ovl: allocate anon bdev per unique lower fs ovl: factor out ovl_map_dev_ino() helper ovl: cleanup ovl_update_time() ovl: add WARN_ON() for non-dir redirect cases ovl: cleanup setting OVL_INDEX ovl: set d->is_dir and d->opaque for last path element ovl: Do not check for redirect if this is last layer ovl: lookup in inode cache first when decoding lower file handle ovl: do not try to reconnect a disconnected origin dentry ovl: disambiguate ovl_encode_fh() ovl: set lower layer st_dev only if setting lower st_ino ovl: fix lookup with middle layer opaque dir and absolute path redirects ovl: Set d->last properly during lookup ovl: set i_ino to the value of st_ino for NFS export -
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management update from Zhang Rui: - Fix race condition in imx_thermal_probe() (Mikhail Lappo) - Add cooling device's statistics in sysfs (Viresh Kumar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: Add cooling device's statistics in sysfs thermal: imx: Fix race condition in imx_thermal_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull dmi updates from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi_scan: Use lowercase letters for UUID firmware: dmi_scan: Add DMI_OEM_STRING support to dmi_matches firmware: dmi_scan: Fix UUID length safety check
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - a series from Dmitry to remove platform data from chromeos_laptop.c, which was the only user of platform data for the atmel_mxt_ts driver. - a series to clean up sysfs and debugfs for cros_ec - other misc cleanups * tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: (22 commits) platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle platform/chrome: cros_ec_debugfs: Add PD port info to debugfs platform/chrome: cros_ec_debugfs: Use octal permissions '0444' platform/chrome: cros_ec_sysfs: use permission-specific DEVICE_ATTR variants platform/chrome: cros_ec_sysfs: introduce to_cros_ec_dev define. platform/chrome: cros_ec_sysfs: Modify error handling platform/chrome: cros_ec_lpc: Add support for Google devices using custom coreboot firmware platform/chrome: cros_ec_lpc: wake up from s2idle on Chrome EC Input: atmel_mxt_ts - remove platform data support platform/chrome: chromeos_laptop - discard data for unneeded boards platform/chrome: chromeos_laptop - use device properties for Pixel platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger platform/chrome: chromeos_laptop - use I2C notifier to create devices platform/chrome: chromeos_laptop - parse DMI IRQ data once platform/chrome: chromeos_laptop - rework i2c peripherals initialization platform/chrome: chromeos_laptop - factor out getting IRQ from DMI platform/chrome: chromeos_laptop - introduce pr_fmt() platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices platform/chrome: chromeos_laptop - add SPDX identifier Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ...
-
Linus Torvalds authored
Merge tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes adds support for more generations of the RCar controller as well as runtime PM support. The JZ4740 driver gains support for device tree and can now be used on all Ingenic SoCs. Rounding things off is a random assortment of fixes and cleanups all across the board" * tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (29 commits) pwm: rcar: Add suspend/resume support pwm: rcar: Use PM Runtime to control module clock dt-bindings: pwm: rcar: Add bindings for R-Car M3N support pwm: rcar: Fix a condition to prevent mismatch value setting to duty pwm: sysfs: Use put_device() instead of kfree() dt-bindings: pwm: sunxi: Add new compatible strings pwm: sun4i: Simplify controller mapping pwm: sun4i: Drop unused .has_rdy member pwm: sun4i: Properly check current state pwm: Remove depends on AVR32 pwm: stm32: LPTimer: Use 3 cells ->of_xlate() dt-bindings: pwm-stm32-lp: Add #pwm-cells pwm: stm32: Protect common prescaler for all channels pwm: stm32: Remove unused struct device pwm: mediatek: Improve precision in rate calculation pwm: mediatek: Remove redundant MODULE_ALIAS entries pwm: mediatek: Fix up PWM4 and PWM5 malfunction on MT7623 pwm: jz4740: Enable for all Ingenic SoCs pwm: jz4740: Add support for devicetree pwm: jz4740: Implement ->set_polarity() ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - Add Nuvoton NPCM watchdog driver - renesas_wdt: Add R-Car Gen2 support - renesas_wdt: add suspend/resume and restart handler support - hpwdt: convert to watchdog core and improve NMI - improve timeout setting/handling in various drivers - coh901327: make license text and module licence match - fix error handling in asm9260_wdt, sprd_wdt and davinci_wdt - aspeed imrovements - dw improvements (for control register & suspend/resume) - add SPDX identifiers for watchdog subsystem * tag 'linux-watchdog-4.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: davinci_wdt: fix error handling in davinci_wdt_probe() watchdog: add SPDX identifiers for watchdog subsystem watchdog: aspeed: Allow configuring for alternate boot watchdog: Add Nuvoton NPCM watchdog driver dt-bindings: watchdog: Add Nuvoton NPCM description watchdog: dw: save/restore control and timeout across suspend/resume watchdog: dw: RMW the control register watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable() watchdog: aspeed: Fix translation of reset mode to ctrl register watchdog: renesas_wdt: Add restart handler watchdog: renesas_wdt: Add R-Car Gen2 support watchdog: renesas_wdt: Add suspend/resume support watchdog: f71808e_wdt: Fix WD_EN register read watchdog: hpwdt: Update driver version. watchdog: hpwdt: Add dynamic debug watchdog: hpwdt: Programable Pretimeout NMI watchdog: hpwdt: remove allow_kdump module parameter. watchdog: hpwdt: condition early return of NMI handler on iLO5 watchdog: hpwdt: Modify to use watchdog core. watchdog: hpwdt: Update nmi_panic message. ...
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2018-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "Features: - add base infrastructure for socket mediation. ABI bump and additional checks to ensure only v8 compliant policy uses socket af mediation. - improve and cleanup dfa verification - improve profile attachment logic - improve overlapping expression handling - add the xattr matching to the attachment logic - improve signal mediation handling with stacked labels - improve handling of no_new_privs in a label stack Cleanups and changes: - use dfa to parse string split - bounded version of label_parse - proper line wrap nulldfa.in - split context out into task and cred naming to better match usage - simplify code in aafs Bug fixes: - fix display of .ns_name for containers - fix resource audit messages when auditing peer - fix logging of the existence test for signals - fix resource audit messages when auditing peer - fix display of .ns_name for containers - fix an error code in verify_table_headers() - fix memory leak on buffer on error exit path - fix error returns checks by making size a ssize_t" * tag 'apparmor-pr-2018-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (36 commits) apparmor: fix memory leak on buffer on error exit path apparmor: fix dangling symlinks to policy rawdata after replacement apparmor: Fix an error code in verify_table_headers() apparmor: fix error returns checks by making size a ssize_t apparmor: update MAINTAINERS file git and wiki locations apparmor: remove POLICY_MEDIATES_SAFE apparmor: add base infastructure for socket mediation apparmor: improve overlapping domain attachment resolution apparmor: convert attaching profiles via xattrs to use dfa matching apparmor: Add support for attaching profiles via xattr, presence and value apparmor: cleanup: simplify code to get ns symlink name apparmor: cleanup create_aafs() error path apparmor: dfa split verification of table headers apparmor: dfa add support for state differential encoding apparmor: dfa move character match into a macro apparmor: update domain transitions that are subsets of confinement at nnp apparmor: move context.h to cred.h apparmor: move task related defines and fns to task.X files apparmor: cleanup, drop unused fn __aa_task_is_confined() apparmor: cleanup fixup description of aa_replace_profiles ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Followup fixes for this merge window. This contains: - Series from Ming, fixing corner cases in our CPU <-> queue mapping. This triggered repeated warnings on especially s390, but I also hit it in cpu hot plug/unplug testing while doing IO on NVMe on x86-64. - Another fix from Ming, ensuring that we always order budget and driver tag identically, avoiding a deadlock on QD=1 devices. - Loop locking regression fix from this merge window, from Omar. - Another loop locking fix, this time missing an unlock, from Tetsuo Handa. - Fix for racing IO submission with device removal from Bart. - sr reference fix from me, fixing a case where disk change or getevents can race with device removal. - Set of nvme fixes by way of Keith, from various contributors" * tag 'for-linus-20180413' of git://git.kernel.dk/linux-block: (28 commits) nvme: expand nvmf_check_if_ready checks nvme: Use admin command effects for admin commands nvmet: fix space padding in serial number nvme: check return value of init_srcu_struct function nvmet: Fix nvmet_execute_write_zeroes sector count nvme-pci: Separate IO and admin queue IRQ vectors nvme-pci: Remove unused queue parameter nvme-pci: Skip queue deletion if there are no queues nvme: target: fix buffer overflow nvme: don't send keep-alives to the discovery controller nvme: unexport nvme_start_keep_alive nvme-loop: fix kernel oops in case of unhandled command nvme: enforce 64bit offset for nvme_get_log_ext fn sr: get/drop reference to device in revalidate and check_events blk-mq: Revert "blk-mq: reimplement blk_mq_hw_queue_mapped" blk-mq: Avoid that submitting a bio concurrently with device removal triggers a crash backing: silence compiler warning using __printf blk-mq: remove code for dealing with remapping queue blk-mq: reimplement blk_mq_hw_queue_mapped blk-mq: don't check queue mapped in __blk_mq_delay_run_hw_queue() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - hot bugfix for i801 to make laptops with strange BIOS reboot again when using SMBUS Host notify - change to MAINTAINERS creating a specific fallback entry for I2C host drivers and settings its status to "Odd fixes" - a long overdue param checking for the I2C core * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: add param sanity check to i2c_transfer() MAINTAINERS: add maintainer for Renesas I2C related drivers MAINTAINERS: remove me as maintainer for I2C host drivers i2c: i801: Restore configuration at shutdown i2c: i801: Save register SMBSLVCMD value only once
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Fixes for bugs in futex, device tree, and userspace breakpoint traps, and for PCI issues on SH7786" * tag 'sh-for-4.17' of git://git.libc.org/linux-sh: arch/sh: pcie-sh7786: handle non-zero DMA offset arch/sh: pcie-sh7786: adjust the memory mapping arch/sh: pcie-sh7786: adjust PCI MEM and IO regions arch/sh: pcie-sh7786: exclude unusable PCI MEM areas arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled arch/sh: pci: don't use disabled resources arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset arch/sh: add sh7786_mm_sel() function sh: fix debug trap failure to process signals before return to user sh: fix memory corruption of unflattened device tree sh: fix futex FUTEX_OP_SET op on userspace addresses
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull more arm64 updates from Will Deacon: "A few late updates to address some issues arising from conflicts with other trees: - Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the generic SMCCC-based firmware call - Fix EL2 hardening capability checking, which was bodged to reduce conflicts with the KVM tree - Add some currently unused assembler macros for managing SIMD registers which will be used by some crypto code in the next merge window" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: assembler: add macros to conditionally yield the NEON under PREEMPT arm64: assembler: add utility macros to push/pop stack frames arm64: Move the content of bpi.S to hyp-entry.S arm64: Get rid of __smccc_workaround_1_hvc_* arm64: capabilities: Rework EL2 vector hardening entry arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull more s390 updates from Martin Schwidefsky: "Three notable larger changes next to the usual bug fixing: - update the email addresses in MAINTAINERS for the s390 folks to use the simpler linux.ibm.com domain instead of the old linux.vnet.ibm.com - an update for the zcrypt device driver that removes some old and obsolete interfaces and add support for up to 256 crypto adapters - a rework of the IPL aka boot code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390: correct nospec auto detection init order s390/zcrypt: Support up to 256 crypto adapters. s390/zcrypt: Remove deprecated zcrypt proc interface. s390/zcrypt: Remove deprecated ioctls. s390/zcrypt: Make ap init functions static. MAINTAINERS: update s390 maintainers email addresses s390/ipl: remove reipl_method and dump_method s390/ipl: correct kdump reipl block checksum calculation s390/ipl: remove non-existing functions declaration s390: assume diag308 set always works s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot s390/ipl: correct ipl parmblock valid checks s390/ipl: rely on diag308 store to get ipl info s390/ipl: move ipl_flags to ipl.c s390/ipl: get rid of ipl_ssid and ipl_devno s390/ipl: unite diag308 and scsi boot ipl blocks s390/ipl: ensure loadparm valid flag is set s390/qdio: lock device while installing IRQ handler s390/qdio: clear intparm during shutdown s390/ccwgroup: require at least one ccw device ... -
Jean Delvare authored
RFC 4122 asks for letters a-f in UUID to be lowercase. Follow this recommendation. Suggested by Paul Dagnelie at: https://savannah.nongnu.org/bugs/index.php?53569Signed-off-by:
Jean Delvare <jdelvare@suse.de>
-
Alex Hung authored
OEM strings are defined by each OEM and they contain customized and useful OEM information. Supporting it provides more flexible uses of the dmi_matches function. Signed-off-by:
Alex Hung <alex.hung@canonical.com> Signed-off-by:
-
Jean Delvare authored
The test which ensures that the DMI type 1 structure is long enough to hold the UUID is off by one. It would fail if the structure is exactly 24 bytes long, while that's sufficient to hold the UUID. I don't expect this bug to cause problem in practice because all implementations I have seen had length 8, 25 or 27 bytes, in line with the SMBIOS specifications. But let's fix it still. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com>
-
Zhang Rui authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "One omap, and one alsa pm fix (we merged the breaking patch via drm tree). Otherwise it's two bunches of amdgpu fixes, removing an unneeded file, some DC fixes, HDMI audio regression fix, and some vega12 fixes" * tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits) Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)" Revert "drm/amd/display: fix dereferencing possible ERR_PTR()" drm/amd/display: Fix regamma not affecting full-intensity color values drm/amd/display: Fix FBC text console corruption drm/amd/display: Only register backlight device if embedded panel connected drm/amd/display: fix brightness level after resume from suspend drm/amd/display: HDMI has no sound after Panel power off/on drm/amdgpu: add MP1 and THM hw ip base reg offset drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset drm/radeon: add PX quirk for Asus K73TK drm/omap: fix crash if there's no video PLL drm/amdgpu: Fix memory leaks at amdgpu_init() error path drm/amdgpu: Fix PCIe lane width calculation drm/radeon: Fix PCIe lane width calculation drm/amdgpu/si: implement get/set pcie_lanes asic callback drm/amdgpu: Add support for SRBM selection v3 Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5" drm/amd/powerply: fix power reading on Fiji drm/amd/powerplay: Enable ACG SS feature drm/amdgpu/sdma: fix mask in emit_pipeline_sync ...
-
