Fix the function declaration so it is on a single line. Fix CamelCase local
variables:

busNo => bus_no
devNo => dev_no

Fix use of uuid_le_cmp() to check for 0 instead of using !uuid_le_cmp().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

OK, lets clean up this messy function. The entire thing is reflowed so spacing
and indentation is correct. Tests that created extra indentation were swapped
for equivalent negative tests that did not create extra indentation. Use of
cmp_uuid_le() were fixed to test specifically for the zero case, and not to
lazily use !cmp_uuid_le(). CamelCase local variable names were fixed:

busNo => bus_no
devNo => dev_no
minSize => min_size
pReqHandler => req_handler
Away => cleanup

Finally, the struct guest_msgs cmd declaration was moved to the beginning of
the function, and cringing and wincing at the function was significantly
reduced.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the CamelCase local variable:

busNo => bus_no
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix CamelCase local variable names:

busNo => bus_no
deviceCount => dev_count
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the function definition so it's a single line. Remove the unnecessary
goto statements and just return directly. Remove the unneeded local variable
for the return result. Fix CamelCase parameters and local variable names:

channelAddr => ch_addr
channelBytes => ch_bytes
pChan => ch
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix CamelCase names:

ProcReadBufferValid => debug_buf_valid
ProcReadBuffer => debug_buf
BusListHead => bus_list
BusListLock => bus_list_lock
BusListCount => bus_list_count
MaxBusCount => max_bus_count
PhysicalDataChan => phys_data_chan
PlatformNumber => platform_no
Incoming_ThreadInfo => incoming_ti
Incoming_Thread_Started => incoming_started
List_Polling_Device_Channels => poll_dev_chan
Lock_Polling_Device_Channels => poll_dev_lock
Wakeup_Polling_Device_Channels => poll_dev_wake_q
Go_Polling_Device_Channels => poll_dev_start
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Split the doubled assignment in uislib_mod_init() into two separate assignments.
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of the extra parenthesis in uislib_enable_channel_interrupts().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the brackets in the else clause in Process_Incoming().
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The if statement in info_debugfs_read() needs another set of brackets for the
else clause.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the line spacing errors in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the variable name rather than the type, and add a set of missing brackets
to the if statement in create_device().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the missing braces and logical continuation problems in create_bus().
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix almost all of the parenthesis alignment problems in uislib.c. The 2
remaining issues are in create_device(), which is heavily indented and needs
to be refactored entirely anyway.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all extraneous spaces from typecasts in uislib.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a comment to the charqueue's spinlock to explain that it is a lock for the
structure.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete the following unused types, and unused function prototypes:

VISORCHIPSET_SWITCH_INFO
VISORCHIPSET_EXTERNALPORT_INFO
VISORCHIPSET_INTERNALPORT_INFO
visorchipset_get_switch_info()
visorchipset_get_externalport_info()
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions in channels/* aren't used in a lot of places. In fact, the
functions in channel.c can be moved to uislib/uisqueue.c, and the rest
of the files in channels can be eliminated.

This patch deletes the channels directory and files, removes it from all
Kconfigs that referenced them, removes the reference in the Makefile,
and moves the functions inside of channels.c to uislib/uisqueue.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Nobody is using this file so remove it and the reference to it in
visorchipset_main.c.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of the extra blank lines in globals.h.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just get rid of the extra blank lines in this file.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update the MODULE_DESCRIPTION to something more useful than the generic
"Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board supports interrupts on change of state of the digital inputs.

Add the necessary subdevice support and interrupt handler to allow async
commands to detect the change of state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board supports interrupts on change of state of the digital inputs.

Introduce a helper function to enable/disable the interrupt. Use the new
helper function to ensure that interrupts are initially disabled during
the driver (*attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The relay registers are readable. Read them during the attach to get
the initial state of the digital outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the multi-line comments to follow the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some white space to the subdevice initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Subdevice 1 is a digial input not a digital I/O subdevice.

Fix the type and, for aesthetics, rename the (*insn_bits) function used
to read the inputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Subdevice 0 is a digial output not a digital I/O subdevice.

Fix the type and, for aesthetics, rename the (*insn_bits) function used
to set the outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style.  In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

Note that the comedi board names I've added to the "Devices:" line don't
quite match the board names reported by the driver itself, as they
contain parentheses and I don't want nested parentheses on the
"Devices:" line (mostly because it confuses a script I use to extract
supported devices from the driver comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

Also change "USB-DUX" to "USB-DUX-SIGMA" to distinguish it from the
other USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

Also change "USB-DUX" to "USB-DUX-FAST" to distinguish it from the other
USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>