* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: document the sysfs ABIs
  firewire: cdev: ABI documentation enhancements
  firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing
  firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL
  firewire: ohci: skip soft reset retries after card ejection
  firewire: ohci: fix PHY reg access after card ejection
  firewire: ohci: add a comment on PHY reg access serialization
  firewire: ohci: reduce potential context_stop latency
  firewire: ohci: remove superfluous posted write flushes
  firewire: net: replacing deprecated __attribute__((packed)) with __packed

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1287 commits)
  icmp: Fix regression in nexthop resolution during replies.
  net: Fix ppc64 BPF JIT dependencies.
  acenic: include NET_SKB_PAD headroom to incoming skbs
  ixgbe: convert to ndo_fix_features
  ixgbe: only enable WoL for magic packet by default
  ixgbe: remove ifdef check for non-existent define
  ixgbe: Pass staterr instead of re-reading status and error bits from descriptor
  ixgbe: Move interrupt related values out of ring and into q_vector
  ixgbe: add structure for containing RX/TX rings to q_vector
  ixgbe: inline the ixgbe_maybe_stop_tx function
  ixgbe: Update ATR to use recorded TX queues instead of CPU for routing
  igb: Fix for DH89xxCC near end loopback test
  e1000: always call e1000_check_for_link() on e1000_ce4100 MACs.
  netxen: add fw version compatibility check
  be2net: request native mode each time the card is reset
  ipv4: Constrain UFO fragment sizes to multiples of 8 bytes
  virtio_net: Fix panic in virtnet_remove
  ipv6: make fragment identifications less predictable
  ipv6: unshare inetpeers
  can: make function can_get_bittiming static
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: Fix in/out emulation
  lguest: Fix translation count about wikipedia's cpuid page
  lguest: Fix three simple typos in comments
  lguest: update comments
  lguest: Simplify device initialization.
  lguest: don't rewrite vmcall instructions
  lguest: remove remaining vmcall
  lguest: use a special 1:1 linear pagetable mode until first switch.
  lguest: Do not exit on non-fatal errors

* 'stable/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.
  xen: tmem: self-ballooning and frontswap-selfshrinking
  xen: Add module alias to autoload backend drivers
  xen: Populate xenbus device attributes
  xen: Add __attribute__((format(printf... where appropriate
  xen: prepare tmem shim to handle frontswap
  xen: allow enable use of VGA console on dom0

* 'stable/pci.cleanups.v1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.
  xen/pci: Remove 'xen_allocate_pirq_gsi'.
  xen/pci: Retire unnecessary #ifdef CONFIG_ACPI
  xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the end
  xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.
  xen/pci: Use the xen_register_pirq for HVM and initial domain users
  xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.
  xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.
  xen/pci: Update comments and fix empty spaces.
  xen/pci: Shuffle code around.

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen:pvhvm: Modpost section mismatch fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (78 commits)
  mmc: MAINTAINERS: add myself as a tmio-mmc maintainer
  mmc: print debug messages for runtime PM actions
  mmc: fix runtime PM with -ENOSYS suspend case
  mmc: at91_mci: move register header from include/ to drivers/
  mmc: mxs-mmc: fix clock rate setting
  mmc: tmio: fix a deadlock
  mmc: tmio: fix a recently introduced bug in DMA code
  mmc: sh_mmcif: maximize power saving
  mmc: tmio: maximize power saving
  mmc: tmio: fix recursive spinlock, don't schedule with interrupts disabled
  mmc: Added quirks for Ricoh 1180:e823 lower base clock frequency
  mmc: omap_hsmmc: fix oops in omap_hsmmc_dma_cb()
  mmc: omap_hsmmc: refactor duplicated code
  mmc: omap_hsmmc: fix a few bugs when setting the clock divisor
  mmc: omap_hsmmc: introduce start_clock and re-use stop_clock
  mmc: omap_hsmmc: split duplicate code to calc_divisor() function
  mmc: omap_hsmmc: move hardcoded frequency constants to defines
  mmc: omap_hsmmc: correct debug report error status mnemonics
  mmc: block: fixed NULL pointer dereference
  mmc: documentation of mmc non-blocking request usage and design.
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs: add size update tracepoint to IO completion
  xfs: convert AIL cursors to use struct list_head
  xfs: remove confusing ail cursor wrapper
  xfs: use a cursor for bulk AIL insertion
  xfs: failure mapping nfs fh to inode should return ESTALE
  xfs: Remove the second parameter to xfs_sb_count()
  xfs: remove the dead XFS_DABUF_DEBUG code
  xfs: remove leftovers of the old btree tracing code
  xfs: remove the dead QUOTADEBUG code
  xfs: remove the unused xfs_buf_delwri_sort function
  xfs: remove wrappers around b_iodone
  xfs: remove wrappers around b_fspriv
  xfs: add a proper transaction pointer to struct xfs_buf
  xfs: factor out xfs_da_grow_inode_int
  xfs: factor out xfs_dir2_leaf_find_stale
  xfs: cleanup struct xfs_dir2_free
  xfs: reshuffle dir2 headers
  xfs: start periodic workers later
  Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc"
  xfs: remove variables that serve no purpose in xfs_alloc_ag_vextent_exact()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: don't limit active work items
  dlm: use workqueue for callbacks
  dlm: remove deadlock debug print
  dlm: improve rsb searches
  dlm: keep lkbs in idr
  dlm: fix kmalloc args
  dlm: don't do pointless NULL check, use kzalloc and fix order of arguments
  dlm: dump address of unknown node
  dlm: use vmalloc for hash tables
  dlm: show addresses in configfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
  hfsplus: ensure bio requests are not smaller than the hardware sectors
  hfsplus: Add additional range check to handle on-disk corruptions
  hfsplus: Add error propagation for hfsplus_ext_write_extent_locked
  hfsplus: add error checking for hfs_find_init()
  hfsplus: lift the 2TB size limit
  hfsplus: fix overflow in hfsplus_read_wrapper
  hfsplus: fix overflow in hfsplus_get_block
  hfsplus: assignments inside `if' condition clean-up

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: combine duplicated block freeing routines
  GFS2: Add S_NOSEC support
  GFS2: Automatically adjust glock min hold time
  GFS2: Cache dir hash table in a contiguous buffer

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: clarify the volume notification types' doc
  UBI: remove dead code
  UBI: dump stack when switching to R/O mode
  UBI: fix oops in error path
  UBI: switch debugging tests knobs to debugfs
  UBI: make it possible to use struct ubi_device in debug.h
  UBI: prepare debugging stuff to further debugfs conversion
  UBI: use debugfs for the extra checks knobs
  UBI: change the interface of a debugging check function

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (32 commits)
  MAINTAINERS: change e-mail of Adrian Hunter
  UBIFS: fix master node recovery
  UBIFS: improve power cut emulation testing
  UBIFS: rename recovery testing variables
  UBIFS: remove custom list of superblocks
  UBIFS: stop re-defining UBI operations
  UBIFS: switch to I/O helpers
  UBIFS: switch to ubifs_leb_write
  UBIFS: switch to ubifs_leb_read
  UBIFS: introduce more I/O helpers
  UBIFS: always print stacktrace when switching to R/O mode
  UBIFS: remove unused and unneeded debugging function
  UBIFS: add global debugfs knobs
  UBIFS: introduce debugfs helpers
  UBIFS: re-arrange debugging code a bit
  UBIFS: be more informative in failure mode
  UBIFS: switch self-check knobs to debugfs
  UBIFS: lessen amount of debugging check types
  UBIFS: introduce helper functions for debugging checks and tests
  UBIFS: amend debugging inode size check function prototype
  ...

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix DEBUG_SLAB warning
  slab: shrink sizeof(struct kmem_cache)
  slab: fix DEBUG_SLAB build
  SLUB: Fix missing <linux/stacktrace.h> include
  slub: reduce overhead of slub_debug
  slub: Add method to verify memory is not freed
  slub: Enable backtrace for create/delete points
  slab allocators: Provide generic description of alignment defines
  slab, slub, slob: Unify alignment definition
  slob/lockdep: Fix gfp flags passed to lockdep

Currently all bio requests are 512 bytes, which may fail for media
whose physical sector size is larger than this. Ensure these
requests are not smaller than the block device logical block size.

BugLink: http://bugs.launchpad.net/bugs/734883Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

'recoff' is read from disk and used for an argument to memcpy, so if
the value read from disk is larger than the page size, it result to
"general protection fault". This patch add additional range check for
the value, so that disk fuzz won't cause such fault.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>

icmp_route_lookup() uses the wrong flow parameters if the reverse
session route lookup isn't used.

So do not commit to the re-decoded flow until we actually make a
final decision to use a real route saved in 'rt2'.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit c225150b "slab: fix DEBUG_SLAB build",
"if ((unsigned long)objp & (ARCH_SLAB_MINALIGN-1))" is always true if
ARCH_SLAB_MINALIGN == 0. Do not print warning if ARCH_SLAB_MINALIGN == 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

... he does not work in Nokia any longer.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

Some workloads need some headroom (NET_SKB_PAD) to avoid expensive
reallocations.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Private rx_csum flags are now duplicate of netdev->features &
NETIF_F_RXCSUM.  We remove those duplicates and now use the net_device_ops
ndo_set_features.  This was based on the original patch submitted by
Michal Miroslaw <mirq-linux@rere.qmqm.pl>.  I also removed the special
case not requiring a reset for X540 hardware.  It is needed just as it is
in 82599 hardware.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Cc:  Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Martin Wilck <martin.wilck@ts.fujitsu.com> reported that systems using
the ixgbe-driver that were capable of WoL were rebooting almost as soon
as they were shut down.  This is because the default WoL settings
enabled magic packet, broadcast, unicast, and multicast.

Other Intel devices seem to use the stored eeprom value for initial WoL
capabilities.  The 82578DM (e1000e) and 82576 (igb) the devices I looked
at had only the magic packet enabled in the eeprom, so that seems
appropriate on ixgbe-based devices as well.  I set the WoL options on my
82578DM to be the same default as the ixgbe devices (umbg) and saw the
same as Martin -- almost as soon as my box shutdown, it booted again.

This patch changes the default to only be the magic packet.  This is the
same as the default for most Intel and non-Intel hardware currently
upstream.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
CC: Martin Wilck <martin.wilck@ts.fujitsu.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change is meant to address possible race conditions from the status
and error bits on the RX descriptors being re-read by multiple functions in
the RX cleanup path.  To resolve this I have added code that will pass the
staterr value to those functions.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change moves work_limit, total_packets, and total_bytes into the ring
container struct of the q_vector.  The advantage of this is that it should
reduce the size of memory used in the event of multiple rings being
assigned to a single q_vector.  In addition it should help to reduce the
total workload for calculating itr since now total_packets and total_bytes
will be the total work done of the interrupt instead of for the ring.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds support for a ring container structure to be used within
the q_vector.  The basic idea is to provide a means of separating the RX
and TX rings while maintaining a common structure for their containment.
The advantage to this is that later we should be able to pass this
structure to the update_itr functions without needing to pass individual
rings.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe_maybe_stop_tx function is only a few lines long and is called
multiple times through the xmit hotpath.  In order to streamline things it
makes sense to just inline it.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change is meant to update ATR so that it will use the recorded RX
queue instead of the CPU in the case of routing.  This change is meant to
help ixgbe default behavior to more closely match that of the kernel.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

On this chipset it is required to configure the MPHY block for loopback tests. If MPHY is not configured then all loopback tests will report failures.
Signed-off-by: Robert Healy <robert.healy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Interrupts about link lost or rx sequence errors are not reported by
the ce4100 hardware, leading to transitions from link UP to link DOWN
never being reported.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We were blatting too much of the register.  Linux didn't care, but in
theory it might.
Reported-by: Jonas Maebe <jonas.maebe@elis.ugent.be>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The comment is outdated, wikipedia now has six translations of the cpuid
page.
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This patch fixes three typos I've accidentally spotted.
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (one was already fixed)

Also removes a long-unused #define and an extraneous semicolon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

We used to notify the Host every time we updated a device's status.  However,
it only really needs to know when we're resetting the device, or failed to
initialize it, or when we've finished our feature negotiation.

In particular, we used to wait for VIRTIO_CONFIG_S_DRIVER_OK in the
status byte before starting the device service threads.  But this
corresponds to the successful finish of device initialization, which
might (like virtio_blk's partition scanning) use the device.  So we
had a hack, if they used the device before we expected we started the
threads anyway.

Now we hook into the finalize_features hook in the Guest: at that
point we tell the Launcher that it can rely on the features we have
acked.  On the Launcher side, we look at the status at that point, and
start servicing the device.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Now we no longer use vmcall, we don't need to rewrite it in the Guest.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

We switch back from using vmcall in 091ebf07
because it was unreliable under kvm, but I missed one (rarely-used) place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>