- 13 Apr, 2006 40 commits
-
-
FUJITA Tomonori authored
It's no longer needed after the convrsion to use the linux srp.h file. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Hannes Reinecke authored
As James B. correctly noted, ahd_reset_channel() in ahd_linux_bus_reset() should be protected by ahd_lock(). However, the main reason for not doing so was a deadlock with the interesting polling mechanism to detect the end a bus reset. This patch replaces the polling mechanism with a saner signalling via flags; it also gives us the benefit of detecting any multiple calls to ahd_reset_channel(). Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
James Bottomley authored
Original From: Ingo Flaschberger <if@xip.at> To support the RA4100 array from Compaq. This patch now correctly handles SCSI_UNKNOWN types with regard to BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't). It also allows a BLIST_MAX_512 flag to restrict the maximum transfer length to 512 blocks (apparently this is an RA4100 problem). Signed-off-by: -
Matthew Wilcox authored
When spinlock debugging is turned on, a struct completion grows beyond the size allowed for the scsi_pointer. So move the struct completion back onto the stack. The additional memory barriers are to keep us from completing a random piece of kernel stack if the command happens to complete after the error handling has finished. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Brian King authored
Bump ipr driver version to 2.1.3 Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Brian King authored
Encapsulate some more of the device reset processing in preparation for SATA support. Signed-off-by:
-
Brian King authored
Remove some unused printk macros, make some more robust, and convert some to use standard printk macros when possible. Signed-off-by:
-
Brian King authored
Simplify the dumping of the command status area by removing some device specific information that has proven to not be worthwhile. Signed-off-by:
-
Brian King authored
Fixup a check used by the ipr driver to determine if a given device is a SCSI disk. Due to the addition of support for attaching SATA devices, this check needs to be more robust. Signed-off-by:
-
Brian King authored
Instead of NULLing the resource entry pointer when a disk goes away to prevent any new commands being sent to it, set the adapter resource handle to an invalid value so new ops getting sent to it will fail with a selection timeout response. This patch is needed for future SATA patches. Signed-off-by:
-
Douglas Gilbert authored
when the sg driver is unable to setup direct IO, free that scatter gather list prior to falling back to indirect IO Further to this thread started by Bryan Holty: http://marc.theaimsgroup.com/?l=linux-scsi&m=114306885116728&w=2 Here is the reworked patch again. This time it has been tested with a program provided by Bryan. Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
James Bottomley authored
necessary to make the domain class use the internal structures Signed-off-by: -
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
This patch enables clustering and sets max_sectors to 0xffff to enable reading and writing of large blocks with tapes (and large transfers with sg). This change is needed after the sg and st drivers started using chained bios through scsi_request_async() in 2.6.16. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Matthew Wilcox authored
Use wait_for_completion_timeout() instead of using a timer (as Christoph Hellwig did for aic7xxx). That lets me eliminate the sym_eh_wait structure; the struct completion, the old_done pointer and the to_do flag can be folded into the sym_ucmd (which overrides the scsi_pointer in scsi_cmnd). The sym_eh_done() function becomes much simpler as the timeout handling is done in sym_eh_handler() directly. The host_lock can be unlocked earlier, and I cache the host in a local variable to make accesses to it quicker. Signed-off-by:
-
Matthew Wilcox authored
The PDC code can set the bus mode, but we were ignoring that setting. Also move the code that determines bus mode into its own function. Signed-off-by:
-
Matthew Wilcox authored
Now sym2 is using spi_print_msg, we don't need to have our own messages for IGNORE WIDE RESIDUE and MODIFY DATA POINTER, so provide the option of passing NULL for the label. Signed-off-by:
-
Matthew Wilcox authored
Undef SYM_OPT_HANDLE_DEVICE_QUEUEING. Call sym_put_start_queue instead of sym_start_next_ccbs. Turn asserts into checks that we can send the command to the adapter, and return busy from queuecommand if we can't. Signed-off-by:
-
Matthew Wilcox authored
Patch below is one out of a large series to mark kernel data const when possible, goal is to use .rodata and avoid false sharing Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Matthew Wilcox authored
- to_do was never set to SYM_EH_DO_COMPLETE, so remove that code - move the spinlocks inside the common error handler code path Signed-off-by:
-
Matthew Wilcox authored
We had our own code (pci_get_base_address()) to get the bus address of a BAR. We can get this using pcibios_resource_to_bus() instead. Signed-off-by:
-
Matthew Wilcox authored
Most of the Kconfig options for switching between IO Port and MMIO operations use the opposite sense from sym2. Really, this option should be set at a chipset level rather than per-driver. Signed-off-by:
-
Mike Anderson authored
Fix puts so that release functions will be called. Signed-off-by:
Mike Anderson <andmike@us.ibm.com> Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Fix module param Update driver version. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn On 64 bit machines, when a 32 bit application tries to acquire the AIF, they will always get and EFAULT error response from the driver. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Add max_channel and max_id sysfs parameters. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Since the helper thread for the driver can be killed unceremoniously by an application, we detect the loss of the helper and restart it. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Remove superfluous code, optimize code, harden code, cast code, correct some text, use msleep instead of schedule_timeout_interruptible. No bugs. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn If there are no aacraid controllers, we do not create the raid controller chrdev, thus when the driver is unloaded it performs a superfluous deregistration. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn The max_channel field is set one too large. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Some of the error return paths during initialization resulted in a zero report to caller Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Plug and play actions resulting from event sequences shall time out if they take longer than 30 seconds to complete. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn The loss of the ownership flags, despite their flaws, in the scsi command were sorely missed and are reinstated more accurately in the aacraid driver to track commands and permit us to properly handle error recovery actions. Signed-off-by:
-
Mark Haverkamp authored
Received from Mark Salyzyn Clean up the remaining scsi id access methods, drop ID_LUN_TO_CONTAINER macro. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
Dave C Boutcher authored
There is a window where we can be re-enabling an adapter, but still allow SCSI commands to be sent to the target. This fix sets our window (request_limit) to -1 as soon as we know the adapter is being reenabled, and closes a very teeny tiny window where we could set the window back to 1 before we grab a lock. Signed-off-by:
Dave Boutcher <sleddog@us.ibm.com> Signed-off-by:
-
Mike Christie authored
Doug found a bug where if scsi_execute_async fails, we are leaking sg resources. scsi_do_req never failed so we did not have to handle that case before. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Christoph Hellwig authored
We currently have two implementations of this obsolete ioctl, one in the block layer and one in the scsi code. Both of them have drawbacks. This patch kills the scsi layer version after updating the block version with the missing bits: - argument checking - use scatterlist I/O - set number of retries based on the submitted command This is the last user of non-S/G I/O except for the gdth driver, so getting this in ASAP and through the scsi tree would be nie to kill the non-S/G I/O path. Jens, what do you think about adding a check for non-S/G I/O in the midlayer? Thanks to Or Gerlitz for testing this patch. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
James Bottomley authored
All participants agree that qla2xxx can now successfully replace this. Signed-off-by:
-
