- 06 May, 2010 1 commit
-
-
Tom Herbert authored
Flag used in check to get rxhash out of the descriptor is incorrect one. Fix to use the proper features flag. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 May, 2010 6 commits
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas_tf/cmd.c drivers/net/wireless/libertas_tf/main.c
-
Johannes Berg authored
"mac80211: improve IBSS scanning" was missing a hunk. This adds that hunk as originally intended. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
-
Eric Dumazet authored
With following patch I can reach maximum rate of my pktgen+udpsink simulator : - 'old' machine : dual quad core E5450 @3.00GHz - 64 UDP rx flows (only differ by destination port) - RPS enabled, NIC interrupts serviced on cpu0 - rps dispatched on 7 other cores. (~130.000 IPI per second) - SLAB allocator (faster than SLUB in this workload) - tg3 NIC - 1.080.000 pps without a single drop at NIC level. Idea is to add two prefetchw() calls in __alloc_skb(), one to prefetch first sk_buff cache line, the second to prefetch the shinfo part. Also using one memset() to initialize all skb_shared_info fields instead of one by one to reduce number of instructions, using long word moves. All skb_shared_info fields before 'dataref' are cleared in __alloc_skb(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
pernet memory is guaranteed to exist when notifiers are called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 May, 2010 9 commits
-
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
And use it consistently in the chipset drivers. Preparation for further clean ups. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
Now that RT30xx support is at the same level as RT28xx support we can enable these devices by default. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
PCI specific code has been remove quite some time ago. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
We currently have this check as a BUG_ON, which is being hit by people. Previously it was an error with a recalculation if not current, return that code. The BUG_ON was introduced by: commit 3110bef7 Author: Guy Cohen <guy.cohen@intel.com> Date: Tue Sep 9 10:54:54 2008 +0800 iwlwifi: Added support for 3 antennas ... the portion adding the BUG_ON is reverted since we are encountering the error and BUG_ON was created with assumption that error is not encountered. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David S. Miller authored
All distributions enable it, therefore no significant body of users are even testing the driver with it disabled. And making NAPI configurable is heavily discouraged anyways. I left the MSI-X interrupt enabling thing in an "#if 0" block so hopefully someone can debug that and it can get re-enabled. Probably it was just one of the NVIDIA chipset MSI erratas that we work handle these days in the PCI quirks (see drivers/pci/quirks.c and stuff like nvenet_msi_disable()). Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add GRO support to forcedeth. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 4b0b72f7 ( net: speedup udp receive path ) introduced a bug in skb_free_datagram_locked(). We should not skb_orphan() skb if we dont have the guarantee we are the last skb user, this might happen with MSG_PEEK concurrent users. To keep socket locked for the smallest period of time, we split consume_skb() logic, inlined in skb_free_datagram_locked() Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 May, 2010 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vxy/lksctp-devDavid S. Miller authored
Add missing linux/vmalloc.h include to net/sctp/probe.c Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Add hlist_for_each_entry_rcu_bh() and hlist_for_each_entry_continue_rcu_bh() macros, and use them in ipv6_get_ifaddr(), if6_get_first() and if6_get_next() to fix lockdeps warnings. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
David J. Choi authored
This is the first version of phy driver from Micrel Inc. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
Worse yet, it seems that its arguments were in reverse order. Also remove one related helper which seems hardly worth keeping. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Korsgaard authored
Use correct bit positions in DM_SHARED_CTRL register for writes. Michael Planes recently encountered a 'KY-RS9600 USB-LAN converter', which came with a driver CD containing a Linux driver. This driver turns out to be a copy of dm9601.c with symbols renamed and my copyright stripped. That aside, it did contain 1 functional change in dm_write_shared_word(), and after checking the datasheet the original value was indeed wrong (read versus write bits). On Michaels HW, this change bumps receive speed from ~30KB/s to ~900KB/s. On other devices the difference is less spectacular, but still significant (~30%). Reported-by: Michael Planes <michael.planes@free.fr> CC: stable@kernel.org Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit d5ffd75a. As requested by Jeff Kircher. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Arlott authored
Frequently when using PPPoE with an interface MTU greater than 1500, the skb is likely to be non-linear. If the skb needs to be passed to pppd then the skb data must be read correctly. The previous commit fixes an issue with accidentally sending skbs to pppd based on an invalid read of the protocol type. When that error occurred pppd was reading invalid skb data too. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Arlott authored
In ppp_input(), PPP_PROTO(skb) may refer to invalid data in the skb. If this happens and (proto >= 0xc000 || proto == PPP_CCPFRAG) then the packet is passed directly to pppd. This occurs frequently when using PPPoE with an interface MTU greater than 1500 because the skb is more likely to be non-linear. The next 2 bytes need to be pulled in ppp_input(). The pull of 2 bytes in ppp_receive_frame() has been removed as it is no longer required. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Looks like we missed removing the return statement in the non-CONFIG_IWM_DEBUG dummy implementation of iwm_debugfs_init... Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
Xose Vazquez Perez authored
0x07d1,0x3c17 D-Link Wireless N 150 USB Adapter DWA-125 0x1b75,0x3071 Ovislink Airlive WN-301USB 0x1d4d,0x0011 Pegatron Ralink RT3072 802.11b/g/n Wireless Lan USB Device 0x083a,0xf511 Arcadyan 802.11 USB Wireless LAN Card 0x13d3,0x3322 AzureWave 802.11 n/g/b USB Wireless LAN Card Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Currently, hwsim will always detect a double scan after the first one has finished ... Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When IBSS is fixed to a frequency, it can still scan to try to find the right BSSID. This makes sense if the BSSID isn't also fixed, but it need not scan all channels -- just one is sufficient. Make it do that by moving the scan setup code to ieee80211_request_internal_scan() and include a channel variable setting. Note that this can be further improved to start the IBSS right away if both frequency and BSSID are fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This allows enabling TX and disabling both TX and RX aggregation sessions manually in debugfs. It is very useful for debugging session initiation and teardown problems since with this you don't have to force a lot of traffic to get aggregation and thus have less data to analyse. Also, to debug mac80211 code itself, make hwsim "support" aggregation sessions. It will still just transfer the frame, but go through the setup and teardown handshakes. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
This involves some refactorring of the common fw download code to substitute ezusb versions of various functions. Note that WPA-enabled firmwares (9.xx series) will not work fully with orinoco_usb yet. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
We expect to be either in process contect or soft interrupt context. So use in_softirq instead. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
This driver uses the core orinoco modules for the bulk of the functionality. The low level hermes routines (for local bus cards) are replaced, the driver supplies its own ndo_xmit_start function, and locking is done with the _bh variant. Some recent functionality is not available to the USB cards yet (firmware loading and WPA). Out-of-tree driver originally written by Manuel Estrada Sainz. Thanks to Mark Davis for supplying hardware to test the updates. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
Local bus and USB drivers will need to do locking differently. The original orinoco_usb patches had a boolean variable controlling whether spin_lock_bh was used, or irq based locking. This version provides wrappers for the lock functions and the drivers specify the functions pointers needed. This will introduce a performance penalty, but I'm not expecting it to be noticable. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
Allow the main drivers to specify a custom version of the net_device_ops structure. This is required by orinoco_usb to supply a separate transmit function. Export existing net_device_ops callbacks so that the drivers can reuse some of the existing code. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
Pave the way for introducing USB alternative functions. Force callers to dereference ops instead of providing wrappers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Both of these functions can currently return a station pointer that, to the driver, is invalid (in IBSS mode only) because adding the station failed. Check for that, and also make ieee80211_find_sta() properly use the per interface station search. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-