- 24 Mar, 2009 40 commits
-
-
Marcelo Tosatti authored
IRQ ack notifications assume an identity mapping between pin->gsi, which might not be the case with, for example, HPET. Translate before acking. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Acked-by:
Gleb Natapov <gleb@redhat.com>
-
Jes Sorensen authored
Account for number of online cpus and use that in loops iterating over the list of vpus instead of scanning the full array unconditionally. This patch is a building block to facilitate allowing to bump up the size of MAX_VCPUS significantly. Signed-off-by:
Jes Sorensen <jes@sgi.com> Acked-by : Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Christian Borntraeger authored
This patch fixes the SET PREFIX interrupt if triggered by userspace. Until now, it was not necessary, but life migration will need it. In addition, it helped me creating SMP support for my kvm_crashme tool (lets kvm execute random guest memory content). Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
The kernel handles some priviledged instruction exits. While I was unable to trigger such an exit from guest userspace, the code should check for supervisor state before emulating a priviledged instruction. I also renamed kvm_s390_handle_priv to kvm_s390_handle_b2. After all there are non priviledged b2 instructions like stck (store clock). Signed-off-by:
-
Christian Borntraeger authored
KVM on s390 does not support the ESA/390 architecture. We refuse to change the architecture mode and print a warning. This patch removes the printk for several reasons: o A malicious guest can flood host dmesg o The old message had no newline o there is no connection between the message and the failing guest This patch simply removes the printk. We already set the condition code to 3 - the guest knows that something went wrong. Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Xiantao Zhang authored
For windows 2008, it needs more pal calls to implement for booting. In addition, also changes the name of set_{sal, pal}_call_result to get_{sal,pal}_call_result for readability. Signed-off-by:Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
-
Xiantao Zhang authored
Add the support to translate PAL Call's pointer args. Signed-off-by:
-
Xiantao Zhang authored
Simply the logic of hash vTLB, and export kvm_gpa_to_mpa. Signed-off-by:
-
Avi Kivity authored
Kconfig symbols are not available in userspace, and are not stripped by headers-install. Avoid their use by adding #defines in <asm/kvm.h> to suit each architecture. Signed-off-by: -
Avi Kivity authored
Currently KVM has a static routing from GSI numbers to interrupts (namely, 0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to the IOAPIC). This is insufficient for several reasons: - HPET requires non 1:1 mapping for the timer interrupt - MSIs need a new method to assign interrupt numbers and dispatch them - ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the ioapics This patch implements an interrupt routing table (as a linked list, but this can be easily changed) and a userspace interface to replace the table. The routing table is initialized according to the current hardwired mapping. Signed-off-by: -
Amit Shah authored
Some typos, comments, whitespace errors corrected in the cpuid code Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Liu Yu authored
Commit 2a4aca11 removed old method _tlbia(). Signed-off-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by:
-
Liu Yu authored
Signed-off-by: -
Liu Yu authored
So, KVM needs to read tlbcam_index to know exactly which TLB1 entry is unused by host. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Avi Kivity authored
Two dimensional paging is only confused by it. Signed-off-by: -
Avi Kivity authored
This actually describes what is going on, rather than alerting the reader that something strange is going on. Signed-off-by: -
Marcelo Tosatti authored
Zeroing on mmu_memory_cache_alloc is unnecessary since: - Smaller areas are pre-allocated with kmem_cache_zalloc. - Page pointed by ->spt is overwritten with prefetch_page and entries in page pointed by ->gfns are initialized before reading. [avi: zeroing pages is unnecessary] Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Jes Sorensen authored
Provide register layout for struct kvm_regs exposed to userland. Signed-off-by:
-
Avi Kivity authored
While the PIT is masked the guest cannot ack the irq, so the reinject logic will never allow the interrupt to be injected. Fix by resetting the reinjection counters on unmask. Unbreaks Xen. Signed-off-by: -
Avi Kivity authored
Allow clients to request notifications when the guest masks or unmasks a particular irq line. This complements irq ack notifications, as the guest will not ack an irq line that is masked. Currently implemented for the ioapic only. Signed-off-by: -
Avi Kivity authored
Two KVM archs support irqchips and two don't. Add a Kconfig item to make selecting between the two models easier. Signed-off-by: -
Avi Kivity authored
Using kvm_mmu_lookup_page() will result in multiple scans of the hash chains; use hlist_for_each_entry_safe() to achieve a single scan instead. Signed-off-by: -
Alexander Graf authored
VMware ESX checks if the microcode level is correct when using a barcelona CPU, in order to see if it actually can use SVM. Let's tell it we're on the safe side... Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Sheng Yang authored
MSI is always enabled by default for msi2intx=1. But if msi2intx=0, we have to disable MSI if guest require to do so. The patch also discard unnecessary msi2intx judgment if guest want to update MSI state. Notice KVM_DEV_IRQ_ASSIGN_MSI_ACTION is a mask which should cover all MSI related operations, though we only got one for now. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
-
Sheng Yang authored
Signed-off-by:
-
Hollis Blanchard authored
After the rewrite of KVM's debug support, this code doesn't even build any more. Signed-off-by:
-
Avi Kivity authored
Otherwise, two threads can create a PIT in parallel and cause a memory leak. Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
If we aren't doing mmio there's no need to exit to userspace (which will just be confused). Signed-off-by: -
Avi Kivity authored
Allow emulate_pop() to read into arbitrary memory rather than just the source operand. Needed for complicated instructions like far returns. Signed-off-by: -
Avi Kivity authored
If we've just emulated an instruction, we won't have any valid exit reason and associated information. Fix by moving the clearing of the emulation_required flag to the exit handler. This way the exit handler can notice that we've been emulating and abort early. Signed-off-by: -
Avi Kivity authored
The ususable bit is important for determining state validity; don't clobber it. Signed-off-by: -
Avi Kivity authored
The vmx guest state validity checks are full of bugs. Make them conform to the manual. Signed-off-by: -
Hollis Blanchard authored
e500 has additional interrupt vectors (and corresponding IVORs) for SPE and performance monitoring interrupts. Signed-off-by:
-
Hollis Blanchard authored
Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match. Signed-off-by:
-
Hollis Blanchard authored
When itlb or dtlb miss happens, E500 needs to update some mmu registers. So that the auto-load mechanism can work on E500 when write a tlb entry. Signed-off-by:
-
Hollis Blanchard authored
Signed-off-by:
-
Hollis Blanchard authored
E500 deosn't support this instruction. Signed-off-by:
-
Hollis Blanchard authored
Signed-off-by:
-
