- 09 Dec, 2014 40 commits
-
-
Mitsuhiro Kimura authored
PTR_ALIGN macro after skb_reserve is redundant, because skb_reserve function adjusts the alignment of skb->data. Signed-off-by:
Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mitsuhiro Kimura authored
Both of 'boguscnt' and 'quota' have nearly meaning as the condition of the reception loop. In order to cut down redundant processing, this patch changes excess judgement. Signed-off-by:
-
Li RongQing authored
the queue length of sd->input_pkt_queue has been put into qlen, and impossible to change, since hold the lock Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-12-09 This series contains updates to i40e and i40evf. Jeff (me) provides a single patch to convert a macro to a static inline function based on feedback from Joe Perches on a previous patch. Shannon provides the remaining twelve patches against i40e. Almost all of Shannon's patches cleanup/fix NVM issues varying in range from adding more detail to debug messages, to removing dead code, to fixing NVM state transitions after an error. Change the handy decoder interface for admin queue return code to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Added a range check to avoid any possible array index-out-of-bound issues. v2: - fixed up patch 05 in the series to use the ARRAY_SIZE() macro as suggested by Sergei Shtylyov - fix up patch 13 to remove unnecessary parens in the return statement as suggested by Sergei Shtylyov ==================== Signed-off-by: -
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== pull-request: can-next 2014-12-07 this is a pull request of 8 patches for net-next/master. Andri Yngvason contributes 4 patches in which the CAN state change handling is consolidated and unified among the sja1000, mscan and flexcan driver. The three patches by Jeremiah Mahler fix spelling mistakes and eliminate the banner[] variable in various parts. And a patch by me that switches on sparse endianess checking by default. ==================== Signed-off-by: -
Eric Dumazet authored
Commit 95bd09eb ("tcp: TSO packets automatic sizing") tried to control TSO size, but did this at the wrong place (sendmsg() time) At sendmsg() time, we might have a pessimistic view of flow rate, and we end up building very small skbs (with 2 MSS per skb). This is bad because : - It sends small TSO packets even in Slow Start where rate quickly increases. - It tends to make socket write queue very big, increasing tcp_ack() processing time, but also increasing memory needs, not necessarily accounted for, as fast clones overhead is currently ignored. - Lower GRO efficiency and more ACK packets. Servers with a lot of small lived connections suffer from this. Lets instead fill skbs as much as possible (64KB of payload), but split them at xmit time, when we have a precise idea of the flow rate. skb split is actually quite efficient. Patch looks bigger than necessary, because TCP Small Queue decision now has to take place after the eventual split. As Neal suggested, introduce a new tcp_tso_autosize() helper, so that tcp_tso_should_defer() can be synchronized on same goal. Rename tp->xmit_size_goal_segs to tp->gso_segs, as this variable contains number of mss that we can put in GSO packet, and is not related to the autosizing goal anymore. Tested: 40 ms rtt link nstat >/dev/null netperf -H remote -l -2000000 -- -s 1000000 nstat | egrep "IpInReceives|IpOutRequests|TcpOutSegs|IpExtOutOctets" Before patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/s 87380 2000000 2000000 0.36 44.22 IpInReceives 600 0.0 IpOutRequests 599 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2033249 0.0 After patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 2000000 2000000 0.36 44.27 IpInReceives 221 0.0 IpOutRequests 232 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2013953 0.0 Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. In the first case, the print is just dropped, because kmalloc itself does enough error reporting. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
The function name contains cleanup, not clean. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Mahesh Bandewar authored
If device is already used as an ipvlan port then refuse to use it as a macvlan port at early stage of port creation. thost1:~# ip link add link eth0 ipvl0 type ipvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 mvl0 type macvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
Move the port check [ipvlan_dev_master()] and device check [ipvlan_dev_slave()] functions to netdevice.h and rename them netif_is_ipvlan_port() and netif_is_ipvlan() resp. to be consistent with macvlan api naming. Signed-off-by:
-
Mahesh Bandewar authored
If a device is already a macvlan port then refuse to use it as an ipvlan port in the early stage of port creation. thost1:~# ip link add link eth0 mvl0 type macvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 ipvl0 type ipvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by:
-
Mahesh Bandewar authored
Similar to a check for macvlan device, netif_is_macvlan(), add another function to check if a device is used as macvlan port. Signed-off-by:
-
Hannes Frederic Sowa authored
Since commit f8864972 ("ipv4: fix dst race in sk_dst_get()") DST_NOCACHE dst_entries get freed by RCU. So there is no need to get a reference on them when we are in rcu protected sections. Cc: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Flavio Leitner authored
The command 'ethtool -i' is useful to find details about the interface like the device driver being used. This was missing for dummy driver. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Rami Rosen authored
This patch fixes the erronous usage of an hexadecimal address in the example, by replacing it with a decimal address. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jiri Benc authored
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Michal Kubeček authored
Since commit fbe168ba ("net: generic dev_disable_lro() stacked device handling"), dev_disable_lro() zeroes NETIF_F_LRO feature flag first for a macvlan device and then for its lower device. As an attempt to set NETIF_F_LRO to zero is ignored, dev_disable_lro() issues a warning and taints kernel. Allowing NETIF_F_LRO to be set independently of the lower device consists of three parts: - add the flag to hw_features to allow toggling it - allow setting it to 0 even if lower device has the flag set - add the flag to MACVLAN_FEATURES to restore copying from lower device on macvlan creation Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Jeff Kirsher authored
Inline functions are preferred over macros when they can be used interchangeably. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Shannon Nelson authored
Add a little more state context to an NVM update debug message. Change-ID: I512160259052bcdbe5bdf1adf403ab2bf7984970 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
-
Shannon Nelson authored
Decoding the AQ return code is great except when the AQ send timed out and there's no return code set. This changes the handy decoder interface to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Change-ID: I07a1f94f921606da49ffac7837bcdc37cd8222eb Signed-off-by:
-
Shannon Nelson authored
Only poll on the NVM semaphore if there's time left on a previous reservation. Also, add a little more info to debug messages. Change-ID: I2439bf870b95a28b810dcb5cca1c06440463cf8a Signed-off-by:
-
Shannon Nelson authored
The state transitions after an error were not managed well, so these changes get us back to the INIT state or don't transition out of the INIT state after most errors. Change-ID: I90aa0e4e348dc4f58cbcdce9c5d4b7fd35981c6c Signed-off-by:
Michal Kosiarz <michal.kosiarz@intel.com> Tested-by:
-
Shannon Nelson authored
Don't bother trying to set a smaller timeout on the polling, just simplify the code and always use the max limit. Also, rename a variable for clarity and fix a comment. Change-ID: I0300c3562ccc4fd5fa3088f8ae52db0c1eb33af5 Signed-off-by:
-
Shannon Nelson authored
The nvm_semaphore_wait field is set but never used, so let's just get rid of it. Change-ID: I2107bd29b69f99b1a61d7591d087429527c9d8fa Signed-off-by:
-
Shannon Nelson authored
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by:
Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by:
-
Shannon Nelson authored
Just to be sure, add a range check to avoid any possible array index-out-of-bound issues. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54 Signed-off-by:
-
Shannon Nelson authored
Rework the debug messages in the NVM update state machine so that we can turn them on and off dynamically rather than forcing a recompile/reload. These can now be turned on with something like: ethtool -s eth1 msglvl 0xf000008f and off with: ethtool -s eth1 msglvl 0xf000000f The high 0xf0000000 gets the driver's attention that we want to change the internal debug flags, and the 0x80 bit is the NVM debug. Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Shannon Nelson authored
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by:
-
Shannon Nelson authored
Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by:
-
Shannon Nelson authored
Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Reviewed-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
James Byrne authored
The Kconfig file says that Gigabit mode is not supported, but it has been supported since commit 140b7552 ("net/macb: Add support for Gigabit Ethernet mode"). Signed-off-by:
James Byrne <james.byrne@origamienergy.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Andreas Ruprecht authored
In a configuration with CONFIG_BRIDGE set to 'm' and CONFIG_ROCKER set to 'y', undefined references occur at link time: > drivers/built-in.o: In function `rocker_port_fdb_learn_work': > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3014: undefined > reference to `br_fdb_external_learn_del' > /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3016: undefined > reference to `br_fdb_external_learn_add' This patch fixes these by declaring CONFIG_ROCKER as being dependent on CONFIG_BRIDGE. Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Acked-by:
-
Gu Zheng authored
Introduce helper function do_sock_sendmsg() to simplify sock_sendmsg{_nosec}, and replace reduplicate code. Signed-off-by:Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
In commit 2b4636a5 ("tcp_cubic: make the delay threshold of HyStart less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms. The remaining problem is that using delay_min + (delay_min/16) as the threshold is too sensitive. 6.25 % of variation is too small for rtt above 60 ms, which are not uncommon. Lets use 12.5 % instead (delay_min + (delay_min/8)) Tested: 80 ms RTT between peers, FQ/pacing packet scheduler on sender. 10 bulk transfers of 10 seconds : nstat >/dev/null for i in `seq 1 10` do netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT done nstat | grep Hystart With the 6.25 % threshold : THROUGHPUT=20.66 THROUGHPUT=249.38 THROUGHPUT=254.10 THROUGHPUT=14.94 THROUGHPUT=251.92 THROUGHPUT=237.73 THROUGHPUT=19.18 THROUGHPUT=252.89 THROUGHPUT=21.32 THROUGHPUT=15.58 TcpExtTCPHystartTrainDetect 2 0.0 TcpExtTCPHystartTrainCwnd 4756 0.0 TcpExtTCPHystartDelayDetect 5 0.0 TcpExtTCPHystartDelayCwnd 180 0.0 With the 12.5 % threshold THROUGHPUT=251.09 THROUGHPUT=247.46 THROUGHPUT=250.92 THROUGHPUT=248.91 THROUGHPUT=250.88 THROUGHPUT=249.84 THROUGHPUT=250.51 THROUGHPUT=254.15 THROUGHPUT=250.62 THROUGHPUT=250.89 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 3175 0.0 Signed-off-by:
-
Eric Dumazet authored
When deploying FQ pacing, one thing we noticed is that CUBIC Hystart triggers too soon. Having SNMP counters to have an idea of how often the various Hystart methods trigger is useful prior to any modifications. This patch adds SNMP counters tracking, how many time "ack train" or "Delay" based Hystart triggers, and cumulative sum of cwnd at the time Hystart decided to end SS (Slow Start) myhost:~# nstat -a | grep Hystart TcpExtTCPHystartTrainDetect 9 0.0 TcpExtTCPHystartTrainCwnd 20650 0.0 TcpExtTCPHystartDelayDetect 10 0.0 TcpExtTCPHystartDelayCwnd 360 0.0 -> Train detection was triggered 9 times, and average cwnd was 20650/9=2294, Delay detection was triggered 10 times and average cwnd was 36 Signed-off-by:
-
Joe Perches authored
Let the compiler decide instead. No change in object size x86-64 -O2 no profiling Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
