Add documentation for the above two functions.  Allow a NULL name to
be passed to amba_request_regions.  In this case, we use the driver's
name associated with the device.

This allows the decompressor to automatically detect the geometry of
the cache while booting to ensure correct behaviour over a wider
number of ARM CPUs.

This optimises the underlying string-long read function for little
endian platforms.

This gives greater information on the cause of the bad IRQ, allowing
the cause to be more effectively traced.

The old sysctl PM interface has been replaced by the driver models
interface.  This has been gone for a while in the -rmk tree and no
one complained, so there's no point keeping it around.

- use dev_dbg for device-centric debugging messages
- use pr_debug for general debugging messages
- use dmapools instead of pcipools
- use NULL rather than 0 for NULL pointers
- use enum dma_data_direction rather than int
- use DMA_* direction definitions rather than PCI_DMA_*
- only check for sane DMA direction on mapping functions, but
  check that DMA direction matches when unmapping/syncing.

Thanks to Adrian Bunk.

Remove kernel 2.0 #ifdef's from arm code, and move MODULE_* to
the end of the file.  Add an appropriate MODULE_LICENSE().

This cset adds support ARM architecture version 6.

Patch from: Andre.

Optimise data_thumb_pushpop and data_thumb_ldmstm population
counting code with a slightly more optimal algorithm than the
original as there are only 8 bits to count instead of 16.

For some unknown reasons Nvidia NForce3 doesn't use the standard Hammer AGP architecture,
but requires set up of some shadow registers. This patch adds that to the K8 AGP driver.

Based on an old 2.4 patch from someone at Nvidia.

Also includes another bug fix for the K8 AGP handler, from Brad House.
We should not assume that there is only one northbridge in a Uniprocessor system.
Always flush all.

Also some minor cleanup.

Give 32bit emulation ioctl handlers the same locking rules as normal ioctl handlers.
This will avoid surprises in driver code.

Most call sys_ioctl who would take it anyways.

This adds a new completely rewritten machine check handler for x86-64.
The old one never worked on 2.6.

The new handler has many improvements. It closely follows the Intel and AMD
recommendations on MCE handlers now (the old one had many violations). It handles
unrecoverable errors in user space better now - it will only kill the process now
if possible instead of panicing.

This one is CPU independent now - it should work on any CPU that supports the standard
x86 MCA architecture.

This new handler only logs fatal errors that lead to kernel panic to the console.
Non fatal errors are logged race free into a new (non ring) buffer now
and supplied to the user using a new character device.  The old one could
deadlock on console and printk locks. This also separates machine check errors
from real kernel errors better. The new buffer has been also designed to
be easily accessible from external debugging tools: it has a signature
and could be even recovered after reboot. It is not organized as a ring buffer -
this means the first errors are kept unless explicitely cleared.

The new error formats can be parsed using ftp://ftp.suse.com/pub/people/ak/x86-64/mcelog.c
The new character device for it can be created with mknod /dev/mcelog c 10 227

There is a new sysfs interface to configure the machine check handler.
It has a "tolerant" parameter that defines the aggressiveness of the machine check:

0: always panic
1: panic if deadlock possible (e.g. MCE happened in the kernel)
2: try to avoid panic

Default is 2

Despite of having more features the new handler is shorter.

Bring the x86-64 port up to date. Lots of smaller bug fixes that have accumulated.
Also fixes another nasty bug introduced by the IA32e changes that causes BUGs at
boot for some people.

Only changes x86-64 specific files. There are some other changes that I'm sending
separately.

 - Some cleanup in NMI watchdog code
 - Fix HyperThreading CPU setup race (Suresh B. Siddha)
 - Update defconfig
 - Add a comment on why iommu_fullflush is disabled.
 - Export sys_ioctl again
 - Fix build with IA32_EMULATION=y and SYSVIPC=n
 - Remove noisy boot printks in the mptable scan.
 - Implement automatic NMI watchdog switching for real now
 - Remove redundant 32bit ioctl handlers for autofs
 - Remove CONFIG ifdefs around rtc 32bit ioctl handlers
 - Remove useless nfsctl ifdef in syscall.c (Al Viro)
 - Increase padding for prefetchw alternative
 - Check for NX bit early before setting up memory maps (Suresh B. Siddha)
 - Change Intel IA32e config description and fix help texts (Jun Nakajima)
 - Fix microcode driver build really now (Dave Jones)
 - Add nohpet option to disable HPET timer
 - Fix double semicolon in aperture.c
 - Add cmpxchg16b cpuid entry
 - Fix return value of read_pci_config_16 (Paul Menage)
 - Fix __KERNEL_COMPAT32_CS (Zachary Amsden)
 - Disable the infamous 30 minutes check in CMOS time setting
 - Update URLs in Kconfig (Petri T. Koistinen)
 - Fix ACPI interrupt source parsing for Nforce3 (Maciej W. Rozycki)
 - Fix 32bit ipc version parsing.
 - Run local APIC NMI watchdog only once a second (or less often on idle boxes)
 - Merge ACPI APIC SCI functions from i386
 - Add i8254 timer suspend code from i386
 - Merge with 2.6.2-rc3 + minor changes from i386
 - Fix empty_zero_page declaration (Greg Johnson)
 - Readd sysctls for exception/page fault trace and vsyscall32
 - Fix WCHAN
 - Fix STACK_TOP usage. Stack for 64bit processes should be at the
   top of memory now again. Also set it correctly for LINUX32_3GB.
 - Add warning fixes for gcc 3.4 and -Wdeclaration-after-statement

into ppc970.osdl.org:/home/torvalds/v2.5/linux

From: Andreas Gruenbacher <agruen@suse.de>,
      and me.

Latest gcc cvs is able to detect mismatches between functions which are
tagged asmlinkage and declarations which are missing asmlinkage.  Or vice
versa.

Fix up the fallout from an x86 allyesconfig build.

From: "Randy.Dunlap" <rddunlap@osdl.org>

Add syscalls.h, which contains prototypes for the kernel's system calls.
Replace open-coded declarations all over the place.  This patch found a
couple of prior bugs.  It appears to be more important with -mregparm=3 as we
discover more asmlinkage mismatches.

Some syscalls have arch-dependent arguments, so their prototypes are in the
arch-specific unistd.h.  Maybe it should have been asm/syscalls.h, but there
were already arch-specific syscall prototypes in asm/unistd.h...

Tested on x86, ia64, x86_64, ppc64, s390 and sparc64.  May cause
trivial-to-fix build breakage on other architectures.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into intel.com:/home/lenb/src/linux-acpi-test-2.6.4

drivers/acpi/sleep/proc.c:359: warning: initialization from incompatible pointer type
drivers/acpi/sleep/proc.c:367: warning: initialization from incompatible pointer type

drivers/acpi/utils.c: In function `acpi_evaluate_reference':
drivers/acpi/utils.c:353: warning: unsigned int format, different type arg (arg 5)

into intel.com:/home/lenb/src/linux-acpi-test-2.6.4

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into intel.com:/home/lenb/src/linux-acpi-test-2.6.4

From: Pavel Machek <pavel@suse.cz>

swsusp/s3 assembly parts, and parts called from assembly are not properly
marked asmlinkage; that leads to double fault on resume when someone
compiles kernel with regparm.  Thanks go to Stefan Seyfried for discovering
this.