- 27 Sep, 2016 7 commits
-
-
Trond Myklebust authored
In NFSv4.1 and newer, if the server decides to revoke some or all of the protocol state, the client is required to iterate through all the stateids that it holds and call TEST_STATEID to determine which stateids still correspond to valid state, and then call FREE_STATEID on the others. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Tested-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Trond Myklebust authored
If the server crashes while we're testing stateids for validity, then we want to initiate session recovery. Usually, we will be calling from a state manager thread, though, so we don't really want to wait. Signed-off-by:
-
Trond Myklebust authored
If the delegation has been marked as revoked, we don't have to test it, because we should already have called FREE_STATEID on it. Signed-off-by:
-
Trond Myklebust authored
We must not allow the use of delegations that have been revoked or are being returned. Signed-off-by:
-
Trond Myklebust authored
If the delegation is revoked, then it can't be used for caching. Fixes: 869f9dfa ("NFSv4: Fix races between nfs_remove_bad_delegation()...") Signed-off-by:
-
Trond Myklebust authored
Due to inode number reuse in filesystems, we can end up corrupting the inode on our client if we apply the file attributes without ensuring that the filehandle matches. Typical symptoms include spurious "mode changed" reports in the syslog. We still do want to ensure that we don't invalidate the dentry if the inode number matches, but we don't have a filehandle. Fixes: fa923369 ("NFS: Don't require a filehandle to refresh...") Signed-off-by:
-
Trond Myklebust authored
As described in RFC5661, section 18.46, some of the status flags exist in order to tell the client when it needs to acknowledge the existence of revoked state on the server and/or to recover state. Those flags will then remain set until the recovery procedure is done. In order to avoid looping, the client therefore needs to ignore those particular flags while recovering. Signed-off-by:
-
- 23 Sep, 2016 3 commits
-
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context frwr_op_unmap_sync() reinit_completion() ib_post_send() wait_for_completion() frwr_wc_localinv_wake() complete() Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The generic caching code from sunrpc is calling revisit() only once. The usage pattern of the completion is: waiter context waker context do_cache_lookup_wait() nfs_cache_defer_req_alloc() init_completion() do_cache_lookup() nfs_cache_wait_for_upcall() wait_for_completion_timeout() nfs_dns_cache_revisit() complete() nfs_cache_defer_req_put() Signed-off-by: -
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). nfs_file_direct_write() or nfs_file_direct_read() allocated a request object via nfs_direct_req_alloc(), which initializes the completion. The request object then is freed later in the exit path. Between the initialization and the release either nfs_direct_write_schedule_iovec() resp nfs_direct_read_schedule_iovec() are called which will asynchronously process the request. The calling function waits via nfs_direct_wait() till the async work has been done. Thus there is only one waiter on the completion. nfs_direct_pgio_init() and nfs_direct_read_completion() are passed via function pointers to nfs pageio. The first function does a ref counting (get_dreq() and put_dreq()) which ensures that nfs_direct_read_completion() and nfs_direct_read_schedule_iovec() only call the completion path once. The usage pattern of the completion is: waiter context waker context nfs_file_direct_write() dreq = nfs_direct_req_alloc() init_completion() nfs_direct_write_schedule_iovec() nfs_direct_wait() wait_for_completion_killable() nfs_direct_write_schedule_work() nfs_direct_complete() complete() nfs_file_direct_read() dreq = nfs_direct_req_all() init_completion() nfs_direct_read_schedule_iovec() nfs_direct_wait() wait_for_completion_killable() nfs_direct_read_schedule_iovec() nfs_direct_complete() complete() nfs_direct_read_completion() nfs_direct_complete() complete() Signed-off-by:
-
- 22 Sep, 2016 12 commits
-
-
Trond Myklebust authored
Use xdr->nwords to tell us how much buffer remains. Signed-off-by:
-
Trond Myklebust authored
When we copy the first part of the data, we need to ensure that value of xdr->nwords is updated as well. Do so by calling __xdr_inline_decode() Signed-off-by:
-
Trond Myklebust authored
Before we try to stash it in the dcache, we need to at least check that the filename passed to us by the server is non-empty and doesn't contain any illegal '\0' or '/' characters. Signed-off-by:
-
Jeff Layton authored
Add a waitqueue head to the client structure. Have clients set a wait on that queue prior to requesting a lock from the server. If the lock is blocked, then we can use that to wait for wakeups. Note that we do need to do this "manually" since we need to set the wait on the waitqueue prior to requesting the lock, but requesting a lock can involve activities that can block. However, only do that for NFSv4.1 locks, either by compiling out all of the waitqueue handling when CONFIG_NFS_V4_1 is disabled, or skipping all of it at runtime if we're dealing with v4.0, or v4.1 servers that don't send lock callbacks. Note too that even when we expect to get a lock callback, RFC5661 section 20.11.4 is pretty clear that we still need to poll for them, so we do still sleep on a timeout. We do however always poll at the longest interval in that case. Signed-off-by:
Jeff Layton <jlayton@redhat.com> [Anna: nfs4_retry_setlk() "status" should default to -ERESTARTSYS] Signed-off-by:
-
Jeff Layton authored
This also consolidates the waiting logic into a single function, instead of having it spread across two like it is now. Signed-off-by:
-
Jeff Layton authored
We need to have this info set up before adding the waiter to the waitqueue, so move this out of the _nfs4_proc_setlk and into the caller. That's more efficient anyway since we don't need to do this more than once if we end up waiting on the lock. Signed-off-by:
-
Jeff Layton authored
For now, the callback doesn't do anything. Support for that will be added in later patches. Signed-off-by:
-
Jeff Layton authored
We want to handle the two cases differently, such that we poll more aggressively when we don't expect a callback. Signed-off-by:
-
Jeff Layton authored
As defined in RFC 5661, section 18.16. Signed-off-by:
-
Jeff Layton authored
We actually want to use TASK_INTERRUPTIBLE sleeps when we're in the process of polling for a NFSv4 lock. If there is a signal pending when the task wakes up, then we'll be returning an error anyway. So, we might as well wake up immediately for non-fatal signals as well. That allows us to return to userland more quickly in that case, but won't change the error that userland sees. Also, there is no need to use the *_unsafe sleep variants here, as no vfs-layer locks should be held at this point. Signed-off-by:
-
Jeff Layton authored
Signed-off-by:
-
Jeff Layton authored
Since it gets passed through to xdr_inline_decode, we might as well have read_buf expect what it expects -- a size_t. Signed-off-by:
-
- 20 Sep, 2016 1 commit
-
-
Chao Yu authored
It will be more clean to use CONFIG_MIGRATION to cover nfs' private .migratepage in nfs_file_aops like we do in other part of nfs operations. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
- 19 Sep, 2016 17 commits
-
-
David Vrabel authored
Write space becoming available may race with putting the task to sleep in xprt_wait_for_buffer_space(). The existing mechanism to avoid the race does not work. This (edited) partial trace illustrates the problem: [1] rpc_task_run_action: task:43546@5 ... action=call_transmit [2] xs_write_space <-xs_tcp_write_space [3] xprt_write_space <-xs_write_space [4] rpc_task_sleep: task:43546@5 ... [5] xs_write_space <-xs_tcp_write_space [1] Task 43546 runs but is out of write space. [2] Space becomes available, xs_write_space() clears the SOCKWQ_ASYNC_NOSPACE bit. [3] xprt_write_space() attemts to wake xprt->snd_task (== 43546), but this has not yet been queued and the wake up is lost. [4] xs_nospace() is called which calls xprt_wait_for_buffer_space() which queues task 43546. [5] The call to sk->sk_write_space() at the end of xs_nospace() (which is supposed to handle the above race) does not call xprt_write_space() as the SOCKWQ_ASYNC_NOSPACE bit is clear and thus the task is not woken. Fix the race by resetting the SOCKWQ_ASYNC_NOSPACE bit in xs_nospace() so the second call to sk->sk_write_space() calls xprt_write_space(). Suggested-by:Trond Myklebust <trondmy@primarydata.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> cc: stable@vger.kernel.org # 4.4 Signed-off-by:
-
Jeff Layton authored
Currently, the layout driver selection code always chooses the first one from the list. That's not really ideal however, as the server can send the list of layout types in any order that it likes. It's up to the client to select the best one for its needs. This patch adds an ordered list of preferred driver types and has the selection code sort the list of available layout drivers according to it. Any unrecognized layout type is sorted to the end of the list. For now, the order of preference is hardcoded, but it should be possible to make this configurable in the future. Signed-off-by:
J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
-
Chuck Lever authored
Clean up: the extra layer of indirection doesn't add value. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
Clean up: When converting xprtrdma to use the new CQ API, I missed a spot. The naming convention elsewhere is: {svc_rdma,rpcrdma}_wc_{operation} Signed-off-by: -
Chuck Lever authored
Tie frwr debugging messages together by always reporting the address of the frwr. Signed-off-by:
-
Chuck Lever authored
The Version One default inline threshold is still 1KB. But allow testing with thresholds up to 64KB. This maximum is somewhat arbitrary. There's no fundamental architectural limit I'm aware of, but it's good to keep the size of Receive buffers reasonable. Now that Send can use a s/g list, a Send buffer is only as large as each RPC requires. Receive buffers are always the size of the inline threshold, however. Signed-off-by:
-
Chuck Lever authored
An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by:
-
Chuck Lever authored
Have frwr's ro_unmap_sync recognize an invalidated rkey that appears as part of a Receive completion. Local invalidation can be skipped for that rkey. Use an out-of-band signaling mechanism to indicate to the server that the client is prepared to receive RDMA Send With Invalidate. Signed-off-by:
-
Chuck Lever authored
Send an RDMA-CM private message on connect, and look for one during a connection-established event. Both sides can communicate their various implementation limits. Implementations that don't support this sideband protocol ignore it. Once the client knows the server's inline threshold maxima, it can adjust the use of Reply chunks, and eliminate most use of Position Zero Read chunks. Moderately-sized I/O can be done using a pure inline RDMA Send instead of RDMA operations that require memory registration. Signed-off-by:
-
Chuck Lever authored
Introduce data structure used by both client and server to exchange implementation details during RDMA/CM connection establishment. This is an experimental out-of-band exchange between Linux RPC-over-RDMA Version One implementations, replacing the deprecated CCP (see RFC 5666bis). The purpose of this extension is to enable prototyping of features that might be introduced in a subsequent version of RPC-over-RDMA. Suggested by Christoph Hellwig and Devesh Sharma. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Chuck Lever authored
Clean up: The fields in the recv_wr do not vary. There is no need to initialize them before each ib_post_recv(). This removes a large-ish data structure from the stack. Signed-off-by:
-
Chuck Lever authored
Clean up: Most of the fields in each send_wr do not vary. There is no need to initialize them before each ib_post_send(). This removes a large-ish data structure from the stack. Signed-off-by:
-
Chuck Lever authored
Clean up. Since commit fc664485 ("xprtrdma: Split the completion queue"), rpcrdma_ep_post_recv() no longer uses the "ep" argument. Signed-off-by:
-
Chuck Lever authored
Clean up. The "ia" argument is no longer used. Signed-off-by:
-
Chuck Lever authored
Currently, each regbuf is allocated and DMA mapped at the same time. This is done during transport creation. When a device driver is unloaded, every DMA-mapped buffer in use by a transport has to be unmapped, and then remapped to the new device if the driver is loaded again. Remapping will have to be done _after_ the connect worker has set up the new device. But there's an ordering problem: call_allocate, which invokes xprt_rdma_allocate which calls rpcrdma_alloc_regbuf to allocate Send buffers, happens _before_ the connect worker can run to set up the new device. Instead, at transport creation, allocate each buffer, but leave it unmapped. Once the RPC carries these buffers into ->send_request, by which time a transport connection should have been established, check to see that the RPC's buffers have been DMA mapped. If not, map them there. When device driver unplug support is added, it will simply unmap all the transport's regbufs, but it doesn't have to deallocate the underlying memory. Signed-off-by:
-
Chuck Lever authored
The use of DMA_BIDIRECTIONAL is discouraged by DMA-API.txt. Fortunately, xprtrdma now knows which direction I/O is going as soon as it allocates each regbuf. The RPC Call and Reply buffers are no longer the same regbuf. They can each be labeled correctly now. The RPC Reply buffer is never part of either a Send or Receive WR, but it can be part of Reply chunk, which is mapped and registered via ->ro_map . So it is not DMA mapped when it is allocated (DMA_NONE), to avoid a double- mapping. Since Receive buffers are no longer DMA_BIDIRECTIONAL and their contents are never modified by the host CPU, DMA-API-HOWTO.txt suggests that a DMA sync before posting each buffer should be unnecessary. (See my_card_interrupt_handler). Signed-off-by:
-
Chuck Lever authored
Commit 94931746 ("xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers") capped the number of chunks that may appear in RPC-over-RDMA headers. The maximum header size can be estimated and fixed to avoid allocating buffer space that is never used. Signed-off-by:
-
