- 24 Jan, 2018 40 commits
-
-
Jakub Kicinski authored
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. hnodes need to hold onto the flags now to be able to reuse them on filter removal. Signed-off-by:
-
Jakub Kicinski authored
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by:
-
Jakub Kicinski authored
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by:
-
Jakub Kicinski authored
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by:
-
Jakub Kicinski authored
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by:
-
Jakub Kicinski authored
Propagate extack on removal of offloaded filter. Signed-off-by:
-
Jakub Kicinski authored
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by:
-
Jakub Kicinski authored
cls_bpf now guarantees that only device-bound programs are allowed with skip_sw. The drivers no longer pay attention to flags on filter load, therefore the bpf_offload member can be removed. If flags are needed again they should probably be added to struct tc_cls_common_offload instead. Signed-off-by:
-
Jakub Kicinski authored
Rename the tc_cls_common_offload_init() helper function to tc_cls_common_offload_init_deprecated() and add a new implementation which also takes flags argument. We will only set extack if flags indicate that offload is forced (skip_sw) otherwise driver errors should be ignored, as they don't influence the overall filter installation. Note that we need the tc_skip_hw() helper for new version, therefore it is added later in the file. Signed-off-by:
-
Jakub Kicinski authored
Propagate extack to cls->destroy callbacks when called from non-error paths. On error paths pass NULL to avoid overwriting the failure message. Signed-off-by:
-
David S. Miller authored
Dmitry Safonov says: ==================== pktgen: Behavior flags fixes v2: o fixed a nitpick from David Miller There are a bunch of fixes/cleanups/Documentations. Diffstat says for itself, regardless added docs and missed flag parameters. ==================== Signed-off-by: -
Dmitry Safonov authored
Don't use error-prone-brute-force way. Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
Add macro generated pkt_flag_names array, with a little help of which the flags can be printed by using an index. Signed-off-by:
-
Dmitry Safonov authored
PKT_FALGS macro will be used to add package behavior names definitions to simplify the code that prints/reads pkg flags. Sorted the array in order of printing the flags in pktgen_if_show() Note: Renamed IPSEC_ON => IPSEC for simplicity. No visible behavior change expected. Signed-off-by:
-
Dmitry Safonov authored
o FLOW_SEQ now can be disabled with pgset "flag !FLOW_SEQ" o FLOW_SEQ and FLOW_RND are antonyms, as it's shown by pktgen_if_show() o IPSEC now may be disabled Note, that IPV6 is enabled with dst6/src6 parameters, not with a flag parameter. Signed-off-by:
-
Dmitry Safonov authored
o Change process name in ps output: looks like, these days the process is named kpktgend_<cpu>, rather than pktgen/<cpu>. o Use pg_ctrl for start/stop as it can work well with pgset without changes to $(PGDEV) variable. o Clarify a bit needed $(PGDEV) definition for sample scripts and that one needs to `source functions.sh`. o Document how-to unset a behaviour flag, note about history expansion. o Fix pgset spi parameter value. Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: fix build error Patch 1 fixes build error with compiling cudbg_zlib.c when CONFIG_ZLIB_DEFLATE macro is not defined. Patch 2 fixes following sparse warning: "Using plain integer as NULL pointer" ==================== Signed-off-by: -
Rahul Lakkireddy authored
memset variables to 0 to fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:409:42: sparse: Using plain integer as NULL pointer drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:43:47: sparse: Using plain integer as NULL pointer Fixes: ad75b7d3 ("cxgb4: implement ethtool dump data operations") Fixes: 91c1953d ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Rahul Lakkireddy authored
Fixes: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:39:5: error: redefinition of 'cudbg_compress_buff' int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ In file included from drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:23:0: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.h:45:19: note: previous definition of 'cudbg_compress_buff' was here static inline int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ Fixes: 91c1953d ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: -
David S. Miller authored
Ursula Braun says: ==================== net/smc: socket closing improvements while the first 2 patches are just small cleanups, the remaing patches affect socket closing. ==================== Signed-off-by: -
Ursula Braun authored
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by:
-
Ursula Braun authored
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by:
-
Ursula Braun authored
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by:
-
Ursula Braun authored
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by:
-
Ursula Braun authored
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by:
-
Ganesh Goudar authored
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== bpf and netdevsim test updates A number of test improvements (delayed by merges). Quentin provides patches for checking printing to the verifier log from the drivers and validating extack messages are propagated. There is also a test for replacing TC filters to avoid adding back the bug Daniel recently fixed in net and stable. ==================== Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jakub Kicinski authored
Daniel discovered recently I broke TC filter replace (and fixed it in commit ad9294db ("bpf: fix cls_bpf on filter replace")). Add a test to make sure it never happens again. Signed-off-by:
-
Quentin Monnet authored
Make netdevsim print a message to the BPF verifier log buffer when a program is offloaded. Then use this message in hardware offload selftests to make sure that using this buffer actually prints the message to the console for eBPF hardware offload. The message is appended after the last instruction is processed with the verifying function from netdevsim. Output looks like the following: $ tc filter add dev foo ingress bpf obj sample_ret0.o \ sec .text verbose skip_sw Prog section '.text' loaded (5)! - Type: 3 - Instructions: 2 (0 over limit) - License: Verifier analysis: 0: (b7) r0 = 0 1: (95) exit [netdevsim] Hello from netdevsim! processed 2 insns, stack depth 0 "verbose" flag is required to see it in the console since netdevsim does not throw an error after printing the message. Signed-off-by:Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
-
Jakub Kicinski authored
We should not compile netdevsim/bpf.c if BPF syscall is not enabled. Otherwise bpf core would have to provide wrappers for all functions offload drivers may call, even though system will never see a BPF object. Signed-off-by:
-
Quentin Monnet authored
Add checks to test that netlink extack messages are correctly displayed in some expected error cases for eBPF offload to netdevsim with TC and XDP. iproute2 may be built without libmnl support, in which case the extack messages will not be reported. Try to detect this condition, and when enountered print a mild warning to the user and skip the extack validation. Signed-off-by:
-
Quentin Monnet authored
Use the recently added extack support for TC eBPF filters in netdevsim. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-23 This series contains updates to i40e and i40evf only. Pawel enables FlatNVM support on x722 devices by allowing nvmupdate tool to configure the preservation flags in the AdminQ command. Mitch fixes a potential divide by zero error when DCB is enabled and the firmware fails to configure the VSI, so check for this state. Fixed a bug where the driver could fail to adhere to ETS bandwidth allocations if 8 traffic classes were configured on the switch. Sudheer fixes a potential deadlock by avoiding to call flush_schedule_work() in i40evf_remove(), since cancel_work_sync() and cancel_delayed_work_sync() already cleans up necessary work items. Fixed an issue with the problematic detection and recovery from hung queues in the PF which was causing lost interrupts. This is done by triggering a software interrupt so that interrupts are forced on and if we are already in napi_poll and an interrupt fires, napi_poll will not be rescheduled and the interrupt is lost. Avinash fixes an issue in the VF where is was possible to issue a reset_task while the device is currently being removed. Michal fixes an issue occurring while calling i40e_led_set() with the blink parameter set to true, which was causing the activity LED instead of the link LED to blink for port identification. Shiraz changes the client interface to not call client close/open on netdev down/up events, since this causes a lot of thrash that is not needed. Instead, disable the PE TCP-ENA flag during a netdev down event and re-enable on a netdev up event, since this blocks all TCP traffic to the RDMA protocol engine. Alan fixes an issue which was causing a potential transmit hang by ignoring the PF link up message if the VF state is not yet in the RUNNING state. Amritha fixes the channel VSI recreation during the reset flow to reconfigure the transmit rings and the queue context associated with the channel VSI. ==================== Signed-off-by: -
David S. Miller authored
Davide Caratti says: ==================== net/sched: remove spinlock from 'csum' action Similarly to what has been done earlier with other actions [1][2], this series tries to improve the performance of 'csum' tc action, removing a spinlock in the data path. Patch 1 lets act_csum use per-CPU counters; patch 2 removes spin_{,un}lock_bh() calls from the act() method. test procedure (using pktgen from https://github.com/netoptimizer): # ip link add name eth1 type dummy # ip link set dev eth1 up # tc qdisc add dev eth1 root handle 1: prio # for a in pass drop; do > tc filter del dev eth1 parent 1: pref 10 matchall action csum udp > tc filter add dev eth1 parent 1: pref 10 matchall action csum udp $a > for n in 2 4; do > ./pktgen_bench_xmit_mode_queue_xmit.sh -v -s 64 -t $n -n 1000000 -i eth1 > done > done test results: | | before patch | after patch $a | $n | avg. pps/thread | avg. pps/thread -----+----+-----------------+---------------- pass | 2 | 1671463 ± 4% | 1920789 ± 3% pass | 4 | 648797 ± 1% | 738190 ± 1% drop | 2 | 3212692 ± 2% | 3719811 ± 2% drop | 4 | 1078824 ± 1% | 1328099 ± 1% references: [1] https://www.spinics.net/lists/netdev/msg334760.html [2] https://www.spinics.net/lists/netdev/msg465862.html v3 changes: - use rtnl_dereference() in place of rcu_dereference() in tcf_csum_dump() v2 changes: - add 'drop' test, it produces more contentions - use RCU-protected struct to store 'action' and 'update_flags', to avoid reading the values from subsequent configurations ==================== Signed-off-by: -
Davide Caratti authored
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on act_csum configuration, to reduce the effects of contention in the data path when multiple readers are present. Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
use per-CPU counters, like other TC actions do, instead of maintaining one set of stats across all cores. This allows updating act_csum stats without the need of protecting them using spin_{,un}lock_bh() invocations. Signed-off-by: -
Roopa Prabhu authored
It takes 1sec for bond link down notification to hit user-space when all slaves of the bond go down. 1sec is too long for protocol daemons in user-space relying on bond notification to recover (eg: multichassis lag implementations in user-space). Since the link event code already marks team device port link events as urgent, this patch moves the code to cover all lag ports and master. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-01-23 This series contains updates to ixgbe only. Shannon Nelson provides an implementation of the ipsec hardware offload feature for the ixgbe driver for these devices: x540, x550, 82599. The ixgbe NICs support ipsec offload for 1024 Rx and 1024 Tx Security Associations (SAs), using up to 128 inbound IP addresses, and using the rfc4106(gcm(aes)) encryption. This code does not yet support checksum offload, or TSO in conjunction with the ipsec offload - those will be added in the future. This code shows improvements in both packet throughput and CPU utilization. For example, here are some quicky numbers that show the magnitude of the performance gain on a single run of "iperf -c <dest>" with the ipsec offload on both ends of a point-to-point connection: 9.4 Gbps - normal case 7.6 Gbps - ipsec with offload 343 Mbps - ipsec no offload ==================== Signed-off-by:
-
