- 03 Jan, 2013 38 commits
-
-
Johannes Berg authored
To simplify the locking and not require cfg80211_mutex (which nl80211 uses to access the global regdomain) and also to make it possible for drivers to access their wiphy->regd safely, use RCU to protect these pointers. Acked-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Instead of assigning after calling the function do it inside the function. This will later avoid a period of time where the pointer is NULL. Acked-by:
-
Johannes Berg authored
The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: -
Johannes Berg authored
There's a bug with the world regulatory domain, it can be updated any time which is different from all other regdomains that can only be updated once after a request for them. Fix this by adding a check for "processed" to the reg_is_valid_request() function and clear that when doing a request. While looking at this I also found another locking bug, last_request is protected by the reg_mutex not the cfg80211_mutex so the code in nl80211 is racy. Remove that code as it only tries to prevent an allocation in an error case, which isn't necessary. Then the function can also become static and locking in nl80211 can have a smaller scope. Also change __set_regdom() to do the checks earlier and not different for world/other regdomains. Acked-by:
-
Johannes Berg authored
wiphy_apply_custom_regulatory() doesn't have to hold the regulatory mutex as it only modifies the given wiphy with the given regulatory domain, it doesn't access any global regulatory data. Acked-by:
-
Johannes Berg authored
Many places that currently check that cfg80211_mutex is held don't actually use any data protected by it. The functions that need to hold the cfg80211_mutex are the ones using the cfg80211_regdomain variable, so add the lock assertion to those and clarify this in the comments. The reason for this is that nl80211 uses the regdom without being able to hold reg_mutex. Acked-by:
-
Johannes Berg authored
The function itself has dual-purpose: it can retrieve from a given regdomain or from the globally installed one. Change it to have a single purpose only: to look up from a given regdomain. Pass the correct regdomain in the freq_reg_info() function instead. This also changes the locking rules for it, no locking is required any more. Acked-by:
-
Johannes Berg authored
Even if it never happens and is hidden behind the debug config option, it's completely useless: the calltrace will only show module loading. Acked-by:
-
Johannes Berg authored
toupper() only modifies lower-case letters, so the isalpha() check is redundant; remove it. Acked-by:
-
Johannes Berg authored
Use list_splice_tail_init() and also simplify the locking. Acked-by:
-
Johannes Berg authored
This code is a bit too BUG_ON happy, remove all instances and while doing so make some code a bit smarter by passing the right pointer instead of indices into arrays. Acked-by:
-
Johannes Berg authored
This is pretty much useless since get_wiphy_idx() always returns true since it's always called with a valid wiphy pointer. Acked-by:
-
Johannes Berg authored
Instead of treating special error codes specially, like -EALREADY, introduce a real enum for all the needed possibilities and use it. Acked-by:
-
Johannes Berg authored
It would be a major problem if anything were to run concurrently while the module is being unloaded so remove the locking that doesn't help anything. Acked-by:
-
Johannes Berg authored
Clean up various things like indentation, extra parentheses, too many/few line breaks, etc. Acked-by:
-
Johannes Berg authored
There's no need to unlock before calling queue_regulatory_request(), so simplify the function. Acked-by:
-
Johannes Berg authored
There's no need to test whether a list is empty or not before iterating. Acked-by:
-
Johannes Berg authored
Use ERR_PTR/IS_ERR to return the result or errors, also do some code cleanups. Acked-by:
-
Johannes Berg authored
As the dummy_rule (also renamed from irule) is only used for output by the reg_rules_intersect() function there's no need to clear it at all, remove that. Acked-by:
-
Johannes Berg authored
There's no need to allocate one reg rule more than will be used, reduce the allocations. The allocation in nl80211 already doesn't allocate too much space. Acked-by:
-
Johannes Berg authored
When intersecting rules, we count first to know how many rules need to be allocated, and then do the intersection into the allocated array. However, the code doing this writes past the end of the array because it attempts to do all intersections. Make it stop when the right number of rules has been reached. Acked-by:
-
Johannes Berg authored
In a file that's only built when CONFIG_MAC80211_MESH is defined, having an #ifdef on the same is entirely pointless, so remove it. Signed-off-by: -
Johannes Berg authored
The last fixes re-added the RCU synchronize penalty on roaming to fix the races. Split up sta_info_flush() now to get rid of that again, and let managed mode (and only it) delay the actual destruction. Tested-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Johannes Berg authored
When an interface is brought down it must have been disconnected (or similar) in all modes other than WDS, so warn if any stations were removed in other modes. Tested-by:
-
Johannes Berg authored
When all interfaces have been removed, there can't be any stations left over, so there's no need to flush again. Remove this, and all code associated with it, which also simplifies the function. Tested-by:
-
Vladimir Kondratiev authored
define bits for 'capability info', as in recent spec edition IEEE802.11-2012 Also, add mask for 2-bit field 'bss type', as it is in 802.11ad Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Johannes Berg authored
Paged RX, i.e. SKBs with (some of) the data in pages instead of the SKB header data (skb->data) can behave differently in the stack and cause other bugs. To make debugging easier add an option to hwsim to test with such SKBs. Signed-off-by: -
Chun-Yeow Yeoh authored
Use short slot time in 5GHz for mesh. The performance is increased from 16.4Mbps to 23.4Mbps for two directly connected mesh STAs operating in legacy rate using iperf measurement. Almost similar to the results claimed in IBSS mode. Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> [call ieee80211_get_sdata_band() only once] Signed-off-by:
-
Ben Greear authored
This allows user-space (wpa_supplicant) to disable short guard interval (SGI) for 20Mhz. The SGI-40 disable option is already handled. Signed-off-by:
-
Johannes Berg authored
-
Chaitanya authored
The maximum MTU shouldn't take the headers into account, the maximum MSDU size is exactly the maximum MTU. Signed-off-by:
T Krishna Chaitanya <chaitanyatk@posedge.com> Signed-off-by:
-
Johannes Berg authored
When AP's SSID is hidden the BSS can appear several times in cfg80211's BSS list: once with a zero-length SSID that comes from the beacon, and once for each SSID from probe reponses. Since the mac80211 stores its data in ieee80211_bss which is embedded into cfg80211_bss, mac80211's data will be duplicated too. This becomes a problem when a driver needs the dtim_period since this data exists only in the beacon's instance in cfg80211 bss table which isn't the instance that is used when associating. Remove the DTIM period from the BSS table and track it explicitly to avoid this problem. Cc: stable@vger.kernel.org Tested-by:
Efi Tubul <efi.tubul@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
This is a very old bug, but there's nothing that prevents the timer from running while the module is being removed when we only do del_timer() instead of del_timer_sync(). The timer should normally not be running at this point, but it's not clearly impossible (or we could just remove this.) Cc: stable@vger.kernel.org Tested-by:
-
Johannes Berg authored
Unfortunately, commit b22cfcfc, intended to speed up roaming by avoiding the synchronize_rcu() broke AP/mesh modes as it moved some code into that work item that will still call into the driver at a time where it's no longer expected to handle this: after the AP or mesh has been stopped. To fix this problem remove the per-station work struct, maintain a station cleanup list instead and flush this list when stations are flushed. To keep this patch smaller for stable, do this when the stations are flushed (sta_info_flush()). This unfortunately brings back the original roaming delay; I'll fix that again in a separate patch. Also, Ben reported that the original commit could sometimes (with many interfaces) cause long delays when an interface is set down, due to blocking on flush_workqueue(). Since we now maintain the cleanup list, this particular change of the original patch can be reverted. Cc: stable@vger.kernel.org [3.7] Reported-by:
-
Thomas Pedersen authored
The array of rmc_entrys is redundant since only the list_head is used. Make this an array of list_heads instead and save ~6k per vif at runtime :D Signed-off-by:
Thomas Pedersen <thomas@cozybit.com> Signed-off-by:
-
Johannes Berg authored
Make AP_VLAN type interfaces track the AP master channel context so they have one assigned for the various lookups. Don't give them their own refcount etc. since they're just slaves to the AP master. Signed-off-by: -
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> [change to flush stations with AP flush in second loop] Signed-off-by:
-
Stanislaw Gruszka authored
Do not scan on no-IBSS and disabled channels in IBSS mode. Doing this can trigger Microcode errors on iwlwifi and iwlegacy drivers. Also rename ieee80211_request_internal_scan() function since it is only used in IBSS mode and simplify calling it from ieee80211_sta_find_ibss(). This patch should address: https://bugzilla.redhat.com/show_bug.cgi?id=883414 https://bugzilla.kernel.org/show_bug.cgi?id=49411Reported-by:
Jesse Kahtava <jesse_kahtava@f-m.fm> Reported-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@vger.kernel.org Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
- 22 Dec, 2012 2 commits
-
-
Linus Torvalds authored
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ...
-
