Commit 5657933d ("treewide: Move dma_ops from struct dev_archdata
into struct device") introduced a crash for macio devices, an example
backtrace being:

  kernel BUG at ./include/linux/dma-mapping.h:465!
  Oops: Exception in kernel mode, sig: 5 [#1]
  ...
  NIP [c031ddb0] dmam_alloc_coherent+0x74/0x140
  LR [c031de70] dmam_alloc_coherent+0x134/0x140
  Call Trace:
   dmam_alloc_coherent+0x134/0x140 (unreliable)
   pata_macio_port_start+0x3c/0x8c
   ata_host_start.part.5+0xfc/0x208
   ata_host_activate+0x128/0x154
   pata_macio_common_init+0x2f0/0x538
   pata_macio_attach+0xd8/0x180
   macio_device_probe+0x5c/0xec
   driver_probe_device+0x21c/0x314
   __driver_attach+0xcc/0xd0
   bus_for_each_dev+0x68/0xb4
   bus_add_driver+0x1dc/0x244
   driver_register+0x88/0x130
   pata_macio_init+0x5c/0x88
   do_one_initcall+0x40/0x170
   kernel_init_freeable+0x134/0x1d0
   kernel_init+0x18/0x110
   ret_from_kernel_thread+0x5c/0x64

This was caused by the device having NULL dma_ops, triggering the
BUG_ON(). Previously the device inherited its dma_ops via the assignment
to dev->ofdev.dev.archdata. However after commit 5657933d the
dma_ops are moved into dev->ofdev.dev, and so they need to be explicitly
copied.

Fixes: 5657933d ("treewide: Move dma_ops from struct dev_archdata into struct device")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rewrite change log, add backtrace]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

On POWERNV platform, in order to do DMA via IOMMU (i.e. 32bit DMA in
our case), a device needs an iommu_table pointer set via
set_iommu_table_base().

The codeflow is:
- pnv_pci_ioda2_setup_dma_pe()
	- pnv_pci_ioda2_setup_default_config()
	- pnv_ioda_setup_bus_dma() [1]

pnv_pci_ioda2_setup_dma_pe() creates IOMMU groups,
pnv_pci_ioda2_setup_default_config() does default DMA setup,
pnv_ioda_setup_bus_dma() takes a bus PE (on IODA2, all physical function
PEs as bus PEs except NPU), walks through all underlying buses and
devices, adds all devices to an IOMMU group and sets iommu_table.

On IODA2, when VFIO is used, it takes ownership over a PE which means it
removes all tables and creates new ones (with a possibility of sharing
them among PEs). So when the ownership is returned from VFIO to
the kernel, the iommu_table pointer written to a device at [1] is
stale and needs an update.

This adds an "add_to_group" parameter to pnv_ioda_setup_bus_dma()
(in fact re-adds as it used to be there a while ago for different
reasons) to tell the helper if a device needs to be added to
an IOMMU group with an iommu_table update or just the latter.

This calls pnv_ioda_setup_bus_dma(..., false) from
pnv_ioda2_release_ownership() so when the ownership is restored,
32bit DMA can work again for a device. This does the same thing
on obtaining ownership as the iommu_table point is stale at this point
anyway and it is safer to have NULL there.

We did not hit this earlier as all tested devices in recent years were
only using 64bit DMA; the rare exception for this is MPT3 SAS adapter
which uses both 32bit and 64bit DMA access and it has not been tested
with VFIO much.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The IODA2 specification says that a 64 DMA address cannot use top 4 bits
(3 are reserved and one is a "TVE select"); bottom page_shift bits
cannot be used for multilevel table addressing either.

The existing IODA2 table allocation code aligns the minimum TCE table
size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages,
we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs
13 bits, the maximum number of levels is 48/13 = 3 so we physically
cannot address more and EEH happens on DMA accesses.

This adds a check that too many levels were requested.

It is still possible to have 5 levels in the case of 4K system page size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

On POWER8 (ISA 2.07) lxvx and stxvx are defined to be extended mnemonics
of lxvd2x and stxvd2x. For POWER9 (ISA 3.0) the HW architects in their
infinite wisdom made lxvx and stxvx instructions in their own right.

POWER9 aware GCC will use the POWER9 instruction for lxvx and stxvx
causing these selftests to fail on POWER8. Further compounding the
issue, because of the way -mvsx works it will cause the power9
instructions to be used regardless of -mcpu=power8 to GCC or -mpower8 to
AS.

The safest way to address the problem for now is to not use the extended
mnemonic. We don't care how the CPU loads the values from memory since
the tests only performs register comparisons, so using stdvd2x/lxvd2x
does not impact the test.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Balbir Singh<bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

MMCRA[SDAR_MODE] specifices how the SDAR should be updated in
continous sampling mode. On P9 it must be set to 0b00 when
MMCRA[63] is set.

Fixes: c7c3f568 ('powerpc/perf: macros for power9 format encoding')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Power9 DD1 do not support PMU_HAS_SIER flag and sdsync in
perf_get_data_addr() defaults to MMCRA_SDSYNC which is wrong. Since
power9 MMCRA does not support SDSYNC bit, patch includes PPMU_NO_SIAR
flag to the check and set the sdsync with MMCRA_SAMPLE_ENABLE;

Fixes: 27593d72 ("powerpc/perf: Use MSR to report privilege level on P9 DD1")
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Recent toolchains force the TOC to be 256 byte aligned. We need to
enforce this alignment in the zImage linker script, otherwise pointers
to our TOC variables (__toc_start) could be incorrect. If the actual
start of the TOC and __toc_start don't have the same value we crash
early in the zImage wrapper.

Cc: stable@vger.kernel.org
Suggested-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull powerpc fixes from Michael Ellerman:
 "Five fairly small fixes for things that went in this cycle.

  A fairly large patch to rework the CAS logic on Power9, necessitated
  by a late change to the firmware API, and we can't boot without it.

  Three fixes going to stable, allowing more instructions to be emulated
  on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the
  OPAL XICS workaround.

  And a patch from me to sort the selects under CONFIG PPC. Annoying
  churn, but worth it in the long run, and best for it to go in now to
  avoid conflicts.

  Thanks to:
    Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R.
    Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi
    Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh"

* tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Sort the selects under CONFIG_PPC
  powerpc/64: Fix L1D cache shape vector reporting L1I values
  powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info()
  powerpc: Update to new option-vector-5 format for CAS
  powerpc: Parse the command line before calling CAS
  powerpc/xics: Work around limitations of OPAL XICS priority handling
  powerpc/64: Fix checksum folding in csum_add()
  powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n
  powerpc/booke: Fix boot crash due to null hugepd
  powerpc: Fix compiling a BE kernel with a powerpc64le toolchain
  selftest/powerpc: Fix false failures for skipped tests
  powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop
  powerpc/64: Invalidate process table caching after setting process table
  powerpc: emulate_step() tests for load/store instructions
  powerpc: Emulation support for load/store instructions on LE

Merge branch 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb updates from Konrad Rzeszutek Wilk:
 "Two tiny implementations of the DMA API for callback in ARM (for Xen)"

* 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb-xen: implement xen_swiotlb_get_sgtable callback
  swiotlb-xen: implement xen_swiotlb_dma_mmap callback

Pull namespace fix from Eric Biederman:
 "This fixes a race between put_ucounts and get_ucounts that can cause a
  use after free. The fix works by simplifying the code and so there is
  not even a temptation to be clever and play spinlock vs atomic
  reference games"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucount: Remove the atomicity from ucount->count

Pull tracing fixes from Steven Rostedt:
 "There was some breakage with the changes for jump labels in the 4.11
  merge window:

   - powerpc broke as jump labels uses the two LSB bits as flags in
     initialization.

     A check was added to make sure that all jump label entries were 4
     bytes aligned, but powerpc didn't work that way for modules. Adding
     an alignment in the module linker script appeared to be the best
     solution.

   - Jump labels also added an anonymous union to access those LSB bits
     as a normal long. But because this structure had static
     initialization, it broke older compilers that could not statically
     initialize anonymous unions without brackets.

   - The command line parameter for setting function graph filter broke
     the "EMPTY_HASH" descriptor by modifying it instead of creating a
     new hash to hold the entries.

   - The command line parameter ftrace_graph_max_depth was added to
     allow its setting at boot time. It uses existing code and only the
     command line hook was added.

     This is not really a fix, but as it uses existing code without
     affecting anything else, I added it to this release. It was ready
     before the merge window closed, but I wanted to let it sit in
     linux-next for a couple of days first"

* tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/graph: Add ftrace_graph_max_depth kernel parameter
  tracing: Add #undef to fix compile error
  jump_label: Add comment about initialization order for anonymous unions
  jump_label: Fix anonymous union initialization
  module: set __jump_table alignment to 8
  ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter
  tracing: Fix code comment for ftrace_ops_get_func()

Always increment/decrement ucount->count under the ucounts_lock.  The
increments are there already and moving the decrements there means the
locking logic of the code is simpler.  This simplification in the
locking logic fixes a race between put_ucounts and get_ucounts that
could result in a use-after-free because the count could go zero then
be found by get_ucounts and then be freed by put_ucounts.

A bug presumably this one was found by a combination of syzkaller and
KASAN.  JongWhan Kim reported the syzkaller failure and Dmitry Vyukov
spotted the race in the code.

Cc: stable@vger.kernel.org
Fixes: f6b2db1a ("userns: Make the count of user namespaces per user")
Reported-by: JongHwan Kim <zzoru007@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

We have a big list of selects under CONFIG_PPC, and currently they're
completely unsorted. This means people tend to add new selects at the
bottom of the list, and so two commits which both add a new select will
often conflict.

Instead sort it alphabetically. This is nicer in and of itself, but also
means two commits that add a new select will have a greater chance of
not conflicting.

Add a note at the top and bottom asking people to keep it sorted.

And while we're here pad out the 'if' expressions to make them stand
out.
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

It seems we didn't pay quite enough attention when testing the new cache
shape vectors, which means we didn't notice the bug where the vector for
the L1D was using the L1I values. Fix it, resulting in eg:

  L1I  cache size:     0x8000      32768B         32K
  L1I  line size:        0x80       8-way associative
  L1D  cache size:    0x10000      65536B         64K
  L1D  line size:        0x80       8-way associative

Fixes: 98a5f361 ("powerpc: Add new cache geometry aux vectors")
Cut-and-paste-bug-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Badly-reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

I see a panic in early boot when building with a recent gcc toolchain.
The issue is a divide by zero, which is undefined. Older toolchains
let us get away with it:

int foo(int a) { return a / 0; }

foo:
	li 9,0
	divw 3,3,9
	extsw 3,3
	blr

But newer ones catch it:

foo:
	trap

Add a check to avoid the divide by zero.

Fixes: e2827fe5 ("powerpc/64: Clean up ppc64_caches using a struct per cache")
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

On POWER9 the ibm,client-architecture-support (CAS) negotiation process
has been updated to change how the host to guest negotiation is done for
the new hash/radix mmu as well as the nest mmu, process tables and guest
translation shootdown (GTSE).

This is documented in the unreleased PAPR ACR "CAS option vector
additions for P9".

The host tells the guest which options it supports in
ibm,arch-vec-5-platform-support. The guest then chooses a subset of these
to request in the CAS call and these are agreed to in the
ibm,architecture-vec-5 property of the chosen node.

Thus we read ibm,arch-vec-5-platform-support and make our selection before
calling CAS. We then parse the ibm,architecture-vec-5 property of the
chosen node to check whether we should run as hash or radix.

ibm,arch-vec-5-platform-support format:

index value pairs: <index, val> ... <index, val>

index: Option vector 5 byte number
val:   Some representation of supported values
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Don't print about unknown options, be consistent with OV5_FEAT]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

On POWER9 the hypervisor requires the guest to decide whether it would
like to use a hash or radix mmu model at the time it calls
ibm,client-architecture-support (CAS) based on what the hypervisor has
said it's allowed to do. It is possible to disable radix by passing
"disable_radix" on the command line. The next patch will add support for
the new CAS format, thus we need to parse the command line before calling
CAS so we can correctly select which mmu we would like to use.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The CPPR (Current Processor Priority Register) of a XICS interrupt
presentation controller contains a value N, such that only interrupts
with a priority "more favoured" than N will be received by the CPU,
where "more favoured" means "less than". So if the CPPR has the value 5
then only interrupts with a priority of 0-4 inclusive will be received.

In theory the CPPR can support a value of 0 to 255 inclusive.
In practice Linux only uses values of 0, 4, 5 and 0xff. Setting the CPPR
to 0 rejects all interrupts, setting it to 0xff allows all interrupts.
The values 4 and 5 are used to differentiate IPIs from external
interrupts. Setting the CPPR to 5 allows IPIs to be received but not
external interrupts.

The CPPR emulation in the OPAL XICS implementation only directly
supports priorities 0 and 0xff. All other priorities are considered
equivalent, and mapped to a single priority value internally. This means
when using icp-opal we can not allow IPIs but not externals.

This breaks Linux's use of priority values when a CPU is hot unplugged.
After migrating IRQs away from the CPU that is being offlined, we set
the priority to 5, meaning we still want the offline CPU to receive
IPIs. But the effect of the OPAL XICS emulation's use of a single
priority value is that all interrupts are rejected by the CPU. With the
CPU offline, and not receiving IPIs, we may not be able to wake it up to
bring it back online.

The first part of the fix is in icp_opal_set_cpu_priority(). CPPR values
of 0 to 4 inclusive will correctly cause all interrupts to be rejected,
so we pass those CPPR values through to OPAL. However if we are called
with a CPPR of 5 or greater, the caller is expecting to be able to allow
IPIs but not external interrupts. We know this doesn't work, so instead
of rejecting all interrupts we choose the opposite which is to allow all
interrupts. This is still not correct behaviour, but we know for the
only existing caller (xics_migrate_irqs_away()), that it is the better
option.

The other part of the fix is in xics_migrate_irqs_away(). Instead of
setting priority (CPPR) to 0, and then back to 5 before migrating IRQs,
we migrate the IRQs before setting the priority back to 5. This should
have no effect on an ICP backend with a working set_priority(), and on
icp-opal it means we will keep all interrupts blocked until after we've
finished doing the IRQ migration. Additionally we wait for 5ms after
doing the migration to make sure there are no IRQs in flight.

Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Rewrote comments and change log, change delay to 5ms]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull networking fixes from David Miller:

 1) Fix double-free in batman-adv, from Sven Eckelmann.

 2) Fix packet stats for fast-RX path, from Joannes Berg.

 3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

 4) Fix sendmsg deadlock in rxrpc, from David Howells.

 5) Add missing RCU locking to transport hashtable scan, from Xin Long.

 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

 7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

 8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

 9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...

Pull more KVM updates from Radim Krčmář:
 "Second batch of KVM changes for the 4.11 merge window:

  PPC:
   - correct assumption about ASDR on POWER9
   - fix MMIO emulation on POWER9

  x86:
   - add a simple test for ioperm
   - cleanup TSS (going through KVM tree as the whole undertaking was
     caused by VMX's use of TSS)
   - fix nVMX interrupt delivery
   - fix some performance counters in the guest

  ... and two cleanup patches"

* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Fix pending events injection
  x86/kvm/vmx: remove unused variable in segment_base()
  selftests/x86: Add a basic selftest for ioperm
  x86/asm: Tidy up TSS limit code
  kvm: convert kvm.users_count from atomic_t to refcount_t
  KVM: x86: never specify a sample period for virtualized in_tx_cp counters
  KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
  KVM: PPC: Book3S HV: Fix software walk of guest process page tables

Pull documentation fixes from Jonathan Corbet:
 "A few fixes for the docs tree, including one for a 4.11 build
  regression"

* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
  Documentation/sphinx: fix primary_domain configuration
  docs: Fix htmldocs build failure
  doc/ko_KR/memory-barriers: Update control-dependencies section
  pcieaer doc: update the link
  Documentation: Update path to sysrq.txt

Pull staging/IIO driver fixes from Greg KH:
 "Here are a few small staging and IIO driver fixes for issues that
  showed up after the big set if changes you merged last week.

  Nothing major, just small bugs resolved in some IIO drivers, a lustre
  allocation fix, and some RaspberryPi driver fixes for reported
  problems, as well as a MAINTAINERS entry update.

  All of these have been in linux-next for a week with no reported
  issues"

* tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fsl-mc: fix warning in DT ranges parser
  MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer
  staging: vchiq_2835_arm: Make cache-line-size a required DT property
  staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host()
  staging/lustre/lnet: Fix allocation size for sv_cpt_data
  iio: adc: xilinx: Fix error handling
  iio: 104-quad-8: Fix off-by-one error when addressing flag register
  iio: adc: handle unknow of_device_id data

Pull crypto fixes from Herbert Xu:

 - vmalloc stack regression in CCM

 - Build problem in CRC32 on ARM

 - Memory leak in cavium

 - Missing Kconfig dependencies in atmel and mediatek

 - XTS Regression on some platforms (s390 and ppc)

 - Memory overrun in CCM test vector

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: vmx - Use skcipher for xts fallback
  crypto: vmx - Use skcipher for cbc fallback
  crypto: testmgr - Pad aes_ccm_enc_tv_template vector
  crypto: arm/crc32 - add build time test for CRC instruction support
  crypto: arm/crc32 - fix build error with outdated binutils
  crypto: ccm - move cbcmac input off the stack
  crypto: xts - Propagate NEED_FALLBACK bit
  crypto: api - Add crypto_requires_off helper
  crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
  crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
  crypto: cavium - fix leak on curr if curr->head fails to be allocated
  crypto: cavium - Fix couple of static checker errors

Paul's patch to fix checksum folding, commit b492f7e4 ("powerpc/64:
Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold")
missed a case in csum_add(). Fix it.
Signed-off-by: Shile Zhang <shile.zhang@nokia.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The recent commit to allow calling OPAL calls in real mode, commit
ab9bad0e ("powerpc/powernv: Remove separate entry for OPAL real mode
calls"), introduced a bug when CONFIG_JUMP_LABEL=n.

The commit moved the "mfmsr r12" prior to the call to OPAL_BRANCH, but
we missed that OPAL_BRANCH clobbers r12 when jump labels are disabled.
This leads to us using the tracepoint refcount as the MSR value,
typically zero, and saving that into PACASAVEDMSR. When we return from
OPAL we use that value as the MSR value for rfid, meaning we switch to
32-bit BE real mode - hilarity ensues.

Fix it by using r11 in OPAL_BRANCH, which is not live at the time the
macro is used in OPAL_CALL.

Fixes: ab9bad0e ("powerpc/powernv: Remove separate entry for OPAL real mode calls")
Suggested-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull misc final vfs updates from Al Viro:
 "A few unrelated patches that got beating in -next.

  Everything else will have to go into the next window ;-/"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hfs: fix hfs_readdir()
  selftest for default_file_splice_read() infoleak
  9p: constify ->d_name handling

Pull more SCSI updates from James Bottomley:
 "This is the set of stuff that didn't quite make the initial pull and a
  set of fixes for stuff which did.

  The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes
  cover a lot of previously submitted stuff, the most important of which
  probably covers some of the failing irq vectors allocation and other
  fallout from having the SCSI command allocated as part of the block
  allocation functions"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits)
  scsi: qedi: Fix memory leak in tmf response processing.
  scsi: aacraid: remove redundant zero check on ret
  scsi: lpfc: use proper format string for dma_addr_t
  scsi: lpfc: use div_u64 for 64-bit division
  scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m
  scsi: cciss: correct check map error.
  scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator"
  scsi: aacraid: Fixed expander hotplug for SMART family
  scsi: mpt3sas: switch to pci_alloc_irq_vectors
  scsi: qedf: fixup compilation warning about atomic_t usage
  scsi: remove scsi_execute_req_flags
  scsi: merge __scsi_execute into scsi_execute
  scsi: simplify scsi_execute_req_flags
  scsi: make the sense header argument to scsi_test_unit_ready mandatory
  scsi: sd: improve TUR handling in sd_check_events
  scsi: always zero sshdr in scsi_normalize_sense
  scsi: scsi_dh_emc: return success in clariion_std_inquiry()
  scsi: fix memory leak of sdpk on when gd fails to allocate
  scsi: sd: make sd_devt_release() static
  scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.
  ...

Fixes: 43a0c675 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Missing check for full sock in ip_route_me_harder(), from
   Florian Westphal.

2) Incorrect sip helper structure initilization that breaks it when
   several ports are used, from Christophe Leroy.

3) Fix incorrect assumption when looking up for matching with adjacent
   intervals in the nft_set_rbtree.

4) Fix broken netlink event error reporting in nf_tables that results
   in misleading ESRCH errors propagated to userspace listeners.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull libnvdimm fixes from Dan Williams:
 "A fix and regression test case for nvdimm namespace label
  compatibility.

  Details:

   - An "nvdimm namespace label" is metadata on an nvdimm that
     provisions dimm capacity into a "namespace" that can host a block
     device / dax-filesytem, or a device-dax character device.

     A namespace is an object that other operating environment and
     platform firmware needs to comprehend for capabilities like booting
     from an nvdimm.

     The label metadata contains a checksum that Linux was not
     calculating correctly leading to other environments rejecting the
     Linux label.

   These have received a build success notification from the kbuild
   robot, and a positive test result from Nick who reported the problem"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit, libnvdimm: fix interleave set cookie calculation
  tools/testing/nvdimm: make iset cookie predictable

Pull PCI fixes from Bjorn Helgaas:

 - fix NULL pointer dereferences in many DesignWare-based drivers due to
   refactoring error

 - fix Altera config write breakage due to my refactoring error

* tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: altera: Fix TLP_CFG_DW0 for TLP write
  PCI: dwc: Fix crashes seen due to missing assignments

Pull parisc fixes and cleanups from Helge Deller:
 "Nothing really important in this patchset: fix resource leaks in error
  paths, coding style cleanups and code removal"

* 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Remove flush_user_dcache_range and flush_user_icache_range
  parisc: fix a printk
  parisc: ccio-dma: Handle return NULL error from ioremap_nocache
  parisc: Define access_ok() as macro
  parisc: eisa: Fix resource leaks in error paths
  parisc: eisa: Remove coding style errors

Pull Xtensa updates from Max Filippov:

 - clean up bootable image build targets: provide separate 'Image',
   'zImage' and 'uImage' make targets that only build corresponding
   image type. Make 'all' build all images appropriate for a platform

 - allow merging vectors code into .text section as a preparation step
   for XIP support

 - fix handling external FDT when the kernel is built without
   BLK_DEV_INITRD support

* tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: allow merging vectors into .text section
  xtensa: clean up bootable image build targets
  xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...

Pull SMB3 fixes from Steve French:
 "Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
  namespace) which previously was only enabled for CIFS"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  smb2: Enforce sec= mount option
  CIFS: Fix sparse warnings
  CIFS: implement get_dfs_refer for SMB2+
  CIFS: use DFS pathnames in SMB2+ Create requests
  CIFS: set signing flag in SMB2+ TreeConnect if needed
  CIFS: let ses->ipc_tid hold smb2 TreeIds
  CIFS: add use_ipc flag to SMB2_ioctl()
  CIFS: add build_path_from_dentry_optional_prefix()
  CIFS: move DFS response parsing out of SMB1 code
  CIFS: Fix possible use after free in demultiplex thread

With Sphinx 1.5.3 I get the warning:

	WARNING: primary_domain 'C' not found, ignored.

It seems that domain names in Sphinx are case-sensitive and for the C
domain the name must be lower case.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Build of HTML docs failing due to conversion of deviceiobook.tmpl in
8a8a602f and regulator.tmpl in 028f2533 to RST without removing from
DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the
following error:

make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'.  Stop.
Makefile:1452: recipe for target 'htmldocs' failed
make: *** [htmldocs] Error 2

Update DOCBOOKS to reflect available books.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This commit applies upstream change, commit c8241f85 ("doc: Update
control-dependencies section of memory-barriers.txt"), to Korean
translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The original link is empty, replace it.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>