Attached patch defines dma_mapping_error on alpha.  Without this
libata-core.c won't compile.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Another fix to the put_chip() concurrency logic.

Problem was occurring when:

1) one thread was erasing a block in partition x;
2) another thread suspended the erase in order to write to
   partition y;
3) a third thread came along to read a different block from
   partition x and, when it called put_chip(), chip->oldstate was
   FL_ERASING and the erase (mistakenly) resumed;
4) the write in partition y obviously failed at that point.

Incidentally, the fix for this problem also fixed the case where
suspending writes for MTD XIP usage was not working properly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Andrew Vasquez <andrew.vasquez@qlogic.com>

replace them with _smp_processor_id()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1. FAN Status/Control: you can now get the fan status (running or not) and
   also set the fan speed (for <5 seconds only). The problem is that there
   is an auto regulator that kicks in within about 5 seconds after that to
   restart the fan if it is above a threshold temperature (39 Degree C in
   my Vaio). It is useful just to get the fan status (primarily). It also
   appears that you can change the speed by increasing the values (much
   like the LCD control) - there are effectively only about 6 speeds (it
   seems - not sure, but from what I've played with on my Vaio).

2. Temperature: you can get the current temperature (same as reported by
   ACPI). This is primarily useful for APM users (since ACPI already gives
   this). I have used this to detect when the fan comes on in my Vaio (39
   Degree C).

From: Narayanan R S <nars@kadamba.org>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fold the contents of sonypi.h into sonypi.c making some structures static.

Partly-from: Adrian Bunk <bunk@stusta.de>
Suggested-by: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use MISC_DYNAMIC_MINOR in miscdevice.minor assignment.

Patch-from: Olaf Hering <olh@suse.de>
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add another HELP button event.
Increment the version number.
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Replace schedule_timeout() with msleep() - from janitors.
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Added the missing PCM FORWARD ioctl.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixed the struct size mismatch (due to alignment) of
snd_ctl_elem_value_t for PPC64 and SPARC64.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds the ICH7 AC'97 DID the the intel8x0.c AC'97 audio
driver. This patch was build against 2.6.11-rc1.
Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Enable 'Headphone Jack Sense' control on FSC Scenic-W as default, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixed the default state of 'Headphone Jack Sense' switch on AD1981x
codecs.  Setting this on affects the output of some machines (e.g.
Thindpads).

The default value is set on only hardwares which are known to work.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes sound output on the ASUS W1000 laptop with the CMI9739
chip. It wrongly reports that it has a SPDIF in, when in fact we wish to
use the EAPD pin.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Added ac97 quirk for HP nc8000.
The list is sorted again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Added ac97 quirk for HP Pavilion ZV5030US to bind the control with
mute-LED.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The generic and IA-64 versions of alloc_zeroed_user_highpage() don't
check the return value from alloc_page_vma().  This can lead to an oops
if we're OOM.

This fixes my oops on PPC64, but I haven't got an IA-64 machine/compiler
handy.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Denis V. Lunev <den@asplinux.ru> and based upon
original patch by Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Description: Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. Change the units of the two constants to be msecs and secs
respectively.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Description: Use ssleep() instead of schedule_timeout() to guarantee the task
delays as expected. The first two replacements use TASK_INTERRUPTIBLE but do not
check for signals, so ssleep() should be appropriate.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Description: Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. The current code uses TASK_INTERRUPTIBLE, but does not
respond to signals, so msleep() should be ok.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes xfrm_export.c and moves the EXPORT_SYMBOL{,_GPL}'s to 
the files where the actual functions are.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Make the code more readable by only flipping the specific
bits that need to change each register write.

Signed-off-by: Grant Grundler (grundler@parisc-linux.org)
Signed-off-by: David S. Miller <davem@davemloft.net>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Lennert Buytenhek

Fix two typos in arch/arm/mm/tlb*.S

Signed-off-by: Lennert Buytenhek
Signed-off-by: Russell King

arch/ia64/kernel/mca_asm.S is treating per_cpu__ia64_mca_data as the
start of the mca data, instead of as a pointer to the mca data.  It
ends up overwriting the rest of the per cpu area with the MCA stack and
bspstore.  Since we dereference ia64_mca_data several times, make it a
macro.
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into starflyer.(none):/foo/airlied/bitkeeper/drm-latest

Close a race which could allow for privilege escalation by users with DRI
privileges on Radeon hardware.  Essentially, a malicious program could submit
a packet containing an offset (possibly in main memory) to be rendered from/to,
while a separate thread switched that offset in userspace rapidly between a
valid value and an invalid one.  radeon_check_and_fixup_offset() would pull the
offset in from user space, check it, and spit it back out to user space to be
copied in later by the emit code.  It would sometimes catch the bad value, but
sometimes the malicious program could modify it after the check and get an
invalid offset rendered from/to.

Fix this by allocating a temporary buffer and copying the data in at once.
While here, make the cliprects stuff not do the VERIFYAREA_READ and
COPY_FROM_USER_UNCHECKED gymnastics, avoiding a lock order reversal on FreeBSD.
Performance impact is negligible  -- no difference on r200 to ~1% improvement on
rv200 in quake3 tests (P4 1Ghz, demofour at 1024x768, n=4 or 5)

From: Eric Anholt <anholt@freebsd.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Bug fd.o 2489
Reporter: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

The attached patch adds documentation for the behaviour of the no-MMU mmap.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>

The attached patch does two things:

 (1) We no longer check the return value of file->f_op->get_unmapped_area()
     unless we actually called it. We know addr is zero otherwise because
     we'd've given an error earlier if it wasn't.

 (2) If -ENOSYS was returned by that operation, then we assume we actually
     called a driver (such as the framebuffer driver) that might want to
     invoke the operation in a lower level driver (such as matroxfb) if one
     exists, and that it found that one didn't.

     We translate the -ENOSYS error into -ENODEV - the error we would have
     given if the operation was not supplied in the file ops.

     Doing this permits us an opportunity for arch_get_unmapped_area() or
     something else to be called if we want that to happen, particularly in
     the MMU case.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>