- 12 Jul, 2011 37 commits
-
-
Nadav Har'El authored
This patch implements nested_vmx_vmexit(), called when the nested L2 guest exits and we want to run its L1 parent and let it handle this exit. Note that this will not necessarily be called on every L2 exit. L0 may decide to handle a particular exit on its own, without L1's involvement; In that case, L0 will handle the exit, and resume running L2, without running L1 and without calling nested_vmx_vmexit(). The logic for deciding whether to handle a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(), will appear in a separate patch below. Signed-off-by:
Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Nadav Har'El authored
Before nested VMX support, the exit handler for a guest executing a VMX instruction (vmclear, vmlaunch, vmptrld, vmptrst, vmread, vmread, vmresume, vmwrite, vmon, vmoff), was handle_vmx_insn(). This handler simply threw a #UD exception. Now that all these exit reasons are properly handled (and emulate the respective VMX instruction), nothing calls this dummy handler and it can be removed. Signed-off-by:
-
Nadav Har'El authored
Implement the VMLAUNCH and VMRESUME instructions, allowing a guest hypervisor to run its own guests. This patch does not include some of the necessary validity checks on vmcs12 fields before the entry. These will appear in a separate patch below. Signed-off-by:
-
Nadav Har'El authored
This patch contains code to prepare the VMCS which can be used to actually run the L2 guest, vmcs02. prepare_vmcs02 appropriately merges the information in vmcs12 (the vmcs that L1 built for L2) and in vmcs01 (our desires for our own guests). Signed-off-by:
-
Nadav Har'El authored
Move some of the control field setup to common functions. These functions will also be needed for running L2 guests - L0's desires (expressed in these functions) will be appropriately merged with L1's desires. Signed-off-by:
-
Nadav Har'El authored
Move the setting of constant host-state fields (fields that do not change throughout the life of the guest) from vmx_vcpu_setup to a new common function vmx_set_constant_host_state(). This function will also be used to set the host state when running L2 guests. Signed-off-by:
-
Nadav Har'El authored
Implement the VMREAD and VMWRITE instructions. With these instructions, L1 can read and write to the VMCS it is holding. The values are read or written to the fields of the vmcs12 structure introduced in a previous patch. Signed-off-by:
-
Nadav Har'El authored
This patch implements the VMPTRST instruction. Signed-off-by:
-
Nadav Har'El authored
This patch implements the VMPTRLD instruction. Signed-off-by:
-
Nadav Har'El authored
This patch implements the VMCLEAR instruction. Signed-off-by:
-
Nadav Har'El authored
VMX instructions specify success or failure by setting certain RFLAGS bits. This patch contains common functions to do this, and they will be used in the following patches which emulate the various VMX instructions. Signed-off-by:
-
Nadav Har'El authored
In this patch we add to vmcs12 (the VMCS that L1 keeps for L2) all the standard VMCS fields. Later patches will enable L1 to read and write these fields using VMREAD/ VMWRITE, and they will be used during a VMLAUNCH/VMRESUME in preparing vmcs02, a hardware VMCS for running L2. Signed-off-by:
-
Nadav Har'El authored
We saw in a previous patch that L1 controls its L2 guest with a vcms12. L0 needs to create a real VMCS for running L2. We call that "vmcs02". A later patch will contain the code, prepare_vmcs02(), for filling the vmcs02 fields. This patch only contains code for allocating vmcs02. In this version, prepare_vmcs02() sets *all* of vmcs02's fields each time we enter from L1 to L2, so keeping just one vmcs02 for the vcpu is enough: It can be reused even when L1 runs multiple L2 guests. However, in future versions we'll probably want to add an optimization where vmcs02 fields that rarely change will not be set each time. For that, we may want to keep around several vmcs02s of L2 guests that have recently run, so that potentially we could run these L2s again more quickly because less vmwrites to vmcs02 will be needed. This patch adds to each vcpu a vmcs02 pool, vmx->nested.vmcs02_pool, which remembers the vmcs02s last used to run up to VMCS02_POOL_SIZE L2s. As explained above, in the current version we choose VMCS02_POOL_SIZE=1, I.e., one vmcs02 is allocated (and loaded onto the processor), and it is reused to enter any L2 guest. In the future, when prepare_vmcs02() is optimized not to set all fields every time, VMCS02_POOL_SIZE should be increased. Signed-off-by:
-
Nadav Har'El authored
This patch includes a utility function for decoding pointer operands of VMX instructions issued by L1 (a guest hypervisor) Signed-off-by:
-
Nadav Har'El authored
When the guest can use VMX instructions (when the "nested" module option is on), it should also be able to read and write VMX MSRs, e.g., to query about VMX capabilities. This patch adds this support. Signed-off-by:
-
Nadav Har'El authored
An implementation of VMX needs to define a VMCS structure. This structure is kept in guest memory, but is opaque to the guest (who can only read or write it with VMX instructions). This patch starts to define the VMCS structure which our nested VMX implementation will present to L1. We call it "vmcs12", as it is the VMCS that L1 keeps for its L2 guest. We will add more content to this structure in later patches. This patch also adds the notion (as required by the VMX spec) of L1's "current VMCS", and finally includes utility functions for mapping the guest-allocated VMCSs in host memory. Signed-off-by:
-
Nadav Har'El authored
This patch allows the guest to enable the VMXE bit in CR4, which is a prerequisite to running VMXON. Whether to allow setting the VMXE bit now depends on the architecture (svm or vmx), so its checking has moved to kvm_x86_ops->set_cr4(). This function now returns an int: If kvm_x86_ops->set_cr4() returns 1, __kvm_set_cr4() will also return 1, and this will cause kvm_set_cr4() will throw a #GP. Turning on the VMXE bit is allowed only when the nested VMX feature is enabled, and turning it off is forbidden after a vmxon. Signed-off-by:
-
Nadav Har'El authored
This patch allows a guest to use the VMXON and VMXOFF instructions, and emulates them accordingly. Basically this amounts to checking some prerequisites, and then remembering whether the guest has enabled or disabled VMX operation. Signed-off-by:
-
Nadav Har'El authored
This patch adds to kvm_intel a module option "nested". This option controls whether the guest can use VMX instructions, i.e., whether we allow nested virtualization. A similar, but separate, option already exists for the SVM module. This option currently defaults to 0, meaning that nested VMX must be explicitly enabled by giving nested=1. When nested VMX matures, the default should probably be changed to enable nested VMX by default - just like nested SVM is currently enabled by default. Signed-off-by:
-
Takuya Yoshikawa authored
During tracing the emulator, we noticed that init_emulate_ctxt() sometimes took a bit longer time than we expected. This patch is for mitigating the problem by some degree. By looking into the function, we soon notice that it clears the whole decode_cache whose size is about 2.5K bytes now. Furthermore, most of the bytes are taken for the two read_cache arrays, which are used only by a few instructions. Considering the fact that we are not assuming the cache arrays have been cleared when we store actual data, we do not need to clear the arrays: 2K bytes elimination. In addition, we can avoid clearing the fetch_cache and regs arrays. This patch changes the initialization not to clear the arrays. On our 64-bit host, init_emulate_ctxt() becomes 0.3 to 0.5us faster with this patch applied. Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Takuya Yoshikawa authored
Use a local pointer to the emulate_ctxt for simplicity. Then, arrange the hard-to-read mode selection lines neatly. Signed-off-by:
-
Jan Kiszka authored
So far kvm_arch_vcpu_setup is responsible for freeing the vcpu struct if it fails. Move this confusing resonsibility back into the hands of kvm_vm_ioctl_create_vcpu. Only kvm_arch_vcpu_setup of x86 is affected, all other archs cannot fail. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Nadav Har'El authored
In VMX, before we bring down a CPU we must VMCLEAR all VMCSs loaded on it because (at least in theory) the processor might not have written all of its content back to memory. Since a patch from June 26, 2008, this is done using a per-cpu "vcpus_on_cpu" linked list of vcpus loaded on each CPU. The problem is that with nested VMX, we no longer have the concept of a vcpu being loaded on a cpu: A vcpu has multiple VMCSs (one for L1, a pool for L2s), and each of those may be have been last loaded on a different cpu. So instead of linking the vcpus, we link the VMCSs, using a new structure loaded_vmcs. This structure contains the VMCS, and the information pertaining to its loading on a specific cpu (namely, the cpu number, and whether it was already launched on this cpu once). In nested we will also use the same structure to hold L2 VMCSs, and vmx->loaded_vmcs is a pointer to the currently active VMCS. Signed-off-by:
Acked-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by:
-
Avi Kivity authored
Instead of blacklisting known-unsupported cpuid leaves, whitelist known- supported leaves. This is more conservative and prevents us from reporting features we don't support. Also whitelist a few more leaves while at it. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Xiao Guangrong authored
Introduce drop_parent_pte to remove the rmap of parent pte and clear parent pte Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by:
-
Xiao Guangrong authored
Cleanup the same operation between kvm_mmu_page_unlink_children and mmu_pte_write_zap_pte Signed-off-by:
-
Xiao Guangrong authored
Parent pte rmap and page rmap are very similar, so use the same arithmetic for them Signed-off-by:
-
Xiao Guangrong authored
Abstract the operation of rmap to spte_list, then we can use it for the reverse mapping of parent pte in the later patch Signed-off-by:
-
Xiao Guangrong authored
Fix: warning: ‘cs_sel’ may be used uninitialized in this function warning: ‘ss_sel’ may be used uninitialized in this function Signed-off-by:
-
Xiao Guangrong authored
Simply use __copy_to_user/__clear_user to write guest page since we have already verified the user address when the memslot is set Signed-off-by:
-
Xiao Guangrong authored
Simply return from kvm_mmu_pte_write path if no shadow page is write-protected, then we can avoid to walk all shadow pages and hold mmu-lock Signed-off-by:
-
Avi Kivity authored
vmcs_readl() and friends are really short, but gcc thinks they are long because of the out-of-line exception handlers. Mark them always_inline to clear the misunderstanding. Signed-off-by:
-
Avi Kivity authored
We clean up a failed VMREAD by clearing the output register. Do it in the exception handler instead of unconditionally. This is worthwhile since there are more than a hundred call sites. Signed-off-by:
-
Takuya Yoshikawa authored
Dereference it in the actual users. This not only cleans up the emulator but also makes it easy to convert the old emulation functions to the new em_xxx() form later. Note: Remove some inline keywords to let the compiler decide inlining. Signed-off-by:
-
Takuya Yoshikawa authored
Dereference it in the actual users: only do_insn_fetch_byte(). This is consistent with the way __linearize() dereferences it. Signed-off-by:
-
Takuya Yoshikawa authored
The two macros need special care to use: Assume rc, ctxt, ops and done exist outside of them. Can goto outside. Considering the fact that these are used only in decode functions, moving these right after do_insn_fetch() seems to be a right thing to improve the readability. We also rename do_fetch_insn_byte() to do_insn_fetch_byte() to be consistent. Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
- 07 Jul, 2011 1 commit
-
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: add missing breaks in tps65910_gpio_init
-
- 06 Jul, 2011 2 commits
-
-
Andrea Righi authored
All the blkio.throttle.* file names are incorrectly reported without ".throttle" in the documentation. Fix it. Signed-off-by:
Andrea Righi <andrea@betterlinux.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Juhl authored
The list of available general purpose memory allocators in Documentation/CodingStyle chapter 14 is incomplete. This patch adds the missing vzalloc() to the list. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
