- 12 Jul, 2016 1 commit
-
-
Dan Williams authored
Commit writes to media on system shutdown or pmem driver unload. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 11 Jul, 2016 7 commits
-
-
Dan Williams authored
Given that nvdimm_flush() has higher overhead than wmb_pmem() (pointer chasing through nd_region), and that we otherwise assume a platform has ADR capability when flush hints are not present, move nvdimm_flush() to REQ_FLUSH context. Note that we still arrange for nvdimm_flush() to be called even in the ADR case. We need at least once wmb() fence to push buffered writes in the cpu out to the ADR protected domain. Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
When the NFIT provides multiple flush hint addresses per-dimm it is expressing that the platform is capable of processing multiple flush requests in parallel. There is some fixed cost per flush request, let the cost be shared in parallel on multiple cpus. Since there may not be enough flush hint addresses for each cpu to have one, keep a per-cpu index of the last used hint, hash it with current pid, and assume that access pattern and scheduler randomness will keep the flush-hint usage somewhat staggered across cpus. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
nvdimm_flush() is a replacement for the x86 'pcommit' instruction. It is an optional write flushing mechanism that an nvdimm bus can provide for the pmem driver to consume. In the case of the NFIT nvdimm-bus-provider nvdimm_flush() is implemented as a series of flush-hint-address [1] writes to each dimm in the interleave set (region) that backs the namespace. The nvdimm_has_flush() routine relies on platform firmware to describe the flushing capabilities of a platform. It uses the heuristic of whether an nvdimm bus provider provides flush address data to return a ternary result: 1: flush addresses defined 0: dimm topology described without flush addresses (assume ADR) -errno: no topology information, unable to determine flush mechanism The pmem driver is expected to take the following actions on this ternary result: 1: nvdimm_flush() in response to REQ_FUA / REQ_FLUSH and shutdown 0: do not set, WC or FUA on the queue, take no further action -errno: warn and then operate as if nvdimm_has_flush() returned '0' The caveat of this heuristic is that it can not distinguish the "dimm does not have flush address" case from the "platform firmware is broken and failed to describe a flush address". Given we are already explicitly trusting the NFIT there's not much more we can do beyond blacklisting broken firmwares if they are ever encountered. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
nd_region device driver data will be used in the namespace i/o path. Re-order nd_region_remove() to ensure this data stays live across namespace device removal Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Sample nfit data to test the kernel's handling of the multiple flush-hint case. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
In preparation for triggering flushes of a DIMM's writes-posted-queue (WPQ) via the pmem driver move mapping of flush hint addresses to the region driver. Since this uses devm_nvdimm_memremap() the flush addresses will remain mapped while any region to which the dimm belongs is active. We need to communicate more information to the nvdimm core to facilitate this mapping, namely each dimm object now carries an array of flush hint address resources. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Now that all shared mappings are handled by devm_nvdimm_memremap() we no longer need nfit_spa_map() nor do we need to trigger a callback to the bus provider at region disable time. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 08 Jul, 2016 4 commits
-
-
Dan Williams authored
In preparation for generically mapping flush hint addresses for both the BLK and PMEM use case, provide a generic / reference counted mapping api. Given the fact that a dimm may belong to multiple regions (PMEM and BLK), the flush hint addresses need to be held valid as long as any region associated with the dimm is active. This is similar to the existing BLK-region case where multiple BLK-regions may share an aperture mapping. Up-level this shared / reference-counted mapping capability from the nfit driver to a core nvdimm capability. This eliminates the need for the nd_blk_region.disable() callback. Note that the removal of nfit_spa_map() and related infrastructure is deferred to a later patch. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
We were needlessly converting nfit_mem_init() errors to -ENOMEM. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Before enabling use of flush hints for pmem regions, we need to make sure they are always associated. Move the initialization of nfit_flush out of the block-window specific init path to the general init path. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
This now dead code was needed to prevent compile errors while being staged in -next for v4.5. Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 06 Jul, 2016 3 commits
-
-
Sajjan, Vikas C authored
If devm_add_action() fails, we are explicitly calling the cleanup to free the resources allocated. Use the helper devm_add_action_or_reset() and return directly in case of error, since the cleanup function has been already called by the helper if there was any error. Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Sajjan, Vikas C authored
If devm_add_action() fails, we are explicitly calling the cleanup to free the resources allocated. Lets use the helper devm_add_action_or_reset() and return directly in case of error, since the cleanup function has been already called by the helper if there was any error. Signed-off-by:
Vikas C Sajjan <vikas.cha.sajjan@hpe.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Johannes Thumshirn authored
Initialize struct blk_integrity with 0 as blk_integrity_register() takes the then unitialized struct blk_integrity::flags and ORs it to the resulting block integrity structure. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 27 Jun, 2016 1 commit
-
-
Dan Williams authored
DMA_CMA is incompatible with SWIOTLB used in enterprise distro configurations. Switch to vmalloc() allocations for all resources. Acked-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 24 Jun, 2016 1 commit
-
-
Dan Williams authored
Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to override it and indicate that nfit_test-pmem is not device-mapped. Now, we want to enable nfit_test to operate without DMA_CMA and the pmem it provides will no longer be physically contiguous, i.e. won't be capable of supporting direct_access requests larger than a page. Make pmem_direct_access() a weak symbol so that it can be replaced by the tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static inline now that it no longer needs to be overridden. Acked-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 20 Jun, 2016 1 commit
-
-
stuart hayes authored
Add the Microsoft _DSM command set to the white list of NVDIMM command sets. This command set is documented at: https://msdn.microsoft.com/library/windows/hardware/mt604741 Cc: Pavel Machek <pavel@ucw.cz> [pavel: fix up braces] Signed-off-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 17 Jun, 2016 3 commits
-
-
Dan Williams authored
Fail building nfit_test.ko when the configuration is missing pfn device support. Reported-by:
Megha Dey <megha.dey@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Prompted by commit 287980e4 "remove lots of IS_ERR_VALUE abuses", I ran make coccicheck against drivers/nvdimm/ and found that: if (IS_ERR(x)) return PTR_ERR(x); return 0; ...can be replaced with PTR_ERR_OR_ZERO(). Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Vishal Verma authored
Section 5 about BTT's in kernel usage was quite obsolete, replace it with a simple 'Usage' section that describes how to set up a BTT namespace using the 'ndctl' utility. Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 15 Jun, 2016 1 commit
-
-
Dan Williams authored
Clean up needless calls to the action routine by letting devm_add_action_or_reset() call it automatically. This does cause the disk to registered and immediately unregistered when a memory allocation fails, but the block layer should be prepared for such an event. Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- 12 Jun, 2016 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: - fix an ordering issue in cpu cooling that cooling device is registered before it's ready (freq_table being populated). (Lukasz Luba) - fix a missing comment update (Caesar Wang) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: add the note for set_trip_temp thermal: cpu_cooling: fix improper order during initialization
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current series. This contains: - Two fixes for xen-blkfront, from Bob Liu. - A bug fix for NVMe, releasing only the specific resources we requested. - Fix for a debugfs flags entry for nbd, from Josef. - Plug fix from Omar, fixing up a case of code being switched between two functions. - A missing bio_put() for the new discard callers of submit_bio_wait(), fixing a regression causing a leak of the bio. From Shaun. - Improve dirty limit calculation precision in the writeback code, fixing a case where setting a limit lower than 1% of memory would end up being zero. From Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Only release requested regions xen-blkfront: fix resume issues after a migration xen-blkfront: don't call talk_to_blkback when already connected to blkback nbd: pass the nbd pointer for flags debugfs block: missing bio_put following submit_bio_wait blk-mq: really fix plug list flushing for nomerge queues writeback: use higher precision calculation in domain_dirty_limits()
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "A new bunch of GPIO fixes for v4.7. This time I am very grateful that Ricardo Ribalda Delgado went in and fixed my stupid refcounting mistakes in the removal path for GPIO chips. I had a feeling something was wrong here and so it was. It exploded on OMAP and it fixes their problem. Now it should be (more) solid. The rest i compilation, Kconfig and driver fixes. Some tagged for stable. Summary: - Fix a NULL pointer dereference when we are searching the GPIO device list but one of the devices have been removed (struct gpio_chip pointer is NULL). - Fix unaligned reference counters: we were ending on +3 after all said and done. It should be 0. Remove an extraneous get_device(), and call cdev_del() followed by device_del() in gpiochip_remove() instead and the count goes to zero and calls the release() function properly. - Fix a compile warning due to a missing #include in the OF/device tree portions. - Select ANON_INODES for GPIOLIB, we're using that for our character device. Some randconfig tests disclosed the problem. - Make sure the Zynq driver clock runs also without CONFIG_PM enabled - Fix an off-by-one error in the 104-DIO-48E driver - Fix warnings in bcm_kona_gpio_reset()" * tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings gpio: select ANON_INODES gpio: include <linux/io-mapping.h> in gpiolib-of gpiolib: Fix unaligned used of reference counters gpiolib: Fix NULL pointer deference gpio: zynq: initialize clock even without CONFIG_PM gpio: 104-dio-48e: Fix control port offset computation off-by-one error
-
- 11 Jun, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two current fixes: - one affects Qemu CD ROM emulation, which stopped working after the updates in SCSI to require VPD pages from all conformant devices. Fix temporarily by blacklisting Qemu (we can relax later when they come into compliance). - The other is a fix to the optimal transfer size. We set up a minefield for ourselves by being confused about whether the limits are in bytes or sectors (SCSI optimal is in blocks and the queue parameter is in bytes). This tries to fix the problem (wrong setting for queue limits max_sectors) and make the problem more obvious by introducing a wrapper function" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix rw_max for devices that report an optimal xfer size scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - a bigger fix for i801 to finally be able to be loaded on some machines again - smaller driver fixes - documentation update because of a renamed file * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mux: reg: Provide of_match_table i2c: mux: refer to i2c-mux.txt i2c: octeon: Avoid printk after too long SMBUS message i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: - fix unflatten_dt_nodes when dad parameter is set. - add vendor prefixes for TechNexion and UniWest - documentation fix for Marvell BT - OF IRQ kerneldoc fixes - restrict CMA alignment adjustments to non dma-coherent - a couple of warning fixes in reserved-memory code - DT maintainers updates * tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes() drivers: of: Fix of_pci.h header guard dt-bindings: Add vendor prefix for TechNexion of: add vendor prefix for UniWest dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF of: silence warnings due to max() usage drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent of: irq: fix of_irq_get[_byname]() kernel-doc MAINTAINERS: DeviceTree maintainer updates
-
Linus Torvalds authored
Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux Pull uvc compat XU ioctl fixes from Andy Lutomirski: "uvc's compat XU ioctls go through tons of potentially buggy indirection. The first patch removes the indirection. The second one cleans up the code. Compile-tested only. I have the hardware, but I have absolutely no idea what XU does, how to use it, what software to recompile as 32-bit, or what to test in that software" * tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux: uvc_v4l2: Simplify compat ioctl implementation uvc: Forward compat ioctls to their handlers directly
-
- 10 Jun, 2016 10 commits
-
-
Andy Lutomirski authored
The uvc compat ioctl implementation seems to have copied user data for no good reason. Remove a bunch of copies. Signed-off-by:
Andy Lutomirski <luto@kernel.org>
-
Andy Lutomirski authored
The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Cc: stable@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Has some fixes and some new self tests for btrfs. The self tests are usually disabled in the .config file (unless you're doing btrfs dev work), and this bunch is meant to find problems with the 64K page size patches. Jeff has a patch to help people see if they are using the hardware assist crc32c module, which really helps us nail down problems when people ask why crcs are using so much CPU. Otherwise, it's small fixes" * 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize Btrfs: self-tests: Use macros instead of constants and add missing newline Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE btrfs: advertise which crc32c implementation is being used at module load Btrfs: add validadtion checks for chunk loading Btrfs: add more validation checks for superblock Btrfs: clear uptodate flags of pages in sys_array eb Btrfs: self-tests: Support non-4k page size Btrfs: Fix integer overflow when calculating bytes_per_bitmap Btrfs: test_check_exists: Fix infinite loop when searching for free space entries Btrfs: end transaction if we abort when creating uuid root btrfs: Use __u64 in exported linux/btrfs.h.
-
Linus Torvalds authored
Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from - ptrace: Fix out of bounds array access warning from Khem Raj - pseries: Fix PCI config address for DDW from Gavin Shan - pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added from Michael Ellerman - of: fix autoloading due to broken modalias with no 'compatible' from Wolfram Sang - radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh Kumar K.V - hash: Compute the segment size correctly for ISA 3.0 from Aneesh Kumar K.V - nohash: Fix build break with 64K pages from Michael Ellerman * tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/nohash: Fix build break with 64K pages powerpc/mm/hash: Compute the segment size correctly for ISA 3.0 powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT of: fix autoloading due to broken modalias with no 'compatible' powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added powerpc/pseries: Fix PCI config address for DDW powerpc/ptrace: Fix out of bounds array access warning
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - fix regression in fam15h_power driver - minor variable type fix in lm90 driver - document compatible statement for ina2xx driver * tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) use proper type for update_interval hwmon: (ina2xx) Document compatible for INA231 hwmon: (fam15h_power) Disable preemption when reading registers
-
Linus Torvalds authored
Merge filesystem stacking fixes from Jann Horn. * emailed patches from Jann Horn <jannh@google.com>: sched: panic on corrupted stack end ecryptfs: forbid opening files without mmap handler proc: prevent stacking filesystems on top
-
Jann Horn authored
Until now, hitting this BUG_ON caused a recursive oops (because oops handling involves do_exit(), which calls into the scheduler, which in turn raises an oops), which caused stuff below the stack to be overwritten until a panic happened (e.g. via an oops in interrupt context, caused by the overwritten CPU index in the thread_info). Just panic directly. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jann Horn authored
This prevents users from triggering a stack overflow through a recursive invocation of pagefault handling that involves mapping procfs files into virtual memory. Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Tyler Hicks <tyhicks@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jann Horn authored
This prevents stacking filesystems (ecryptfs and overlayfs) from using procfs as lower filesystem. There is too much magic going on inside procfs, and there is no good reason to stack stuff on top of procfs. (For example, procfs does access checks in VFS open handlers, and ecryptfs by design calls open handlers from a kernel thread that doesn't drop privileges or so.) Signed-off-by:
Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fix from Will Deacon: "A fix for an issue that Alex saw whilst swapping with hardware access/dirty bit support enabled in the kernel: Fix a failure to fault in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always take dirty state from new pte in ptep_set_access_flags
-