This commit makes the rcu_grace_period tracepoint use gp_seq instead
of ->gpnum or ->completed.  It also introduces a "cpuofl-bgp" string to
less obscurely indicate when a CPU has gone offline while a grace period
is waiting on it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes rcu_nocb_wait_gp() check rdp->gp_seq_needed to see
if the current CPU already knows about the needed grace period having
already been requested.  If so, it avoids acquiring the corresponding
leaf rcu_node structure's ->lock, thus decreasing contention.  This
optimization is intended for cases where either multiple leader rcuo
kthreads are running on the same CPU or these kthreads are running on
a non-offloaded (e.g., housekeeping) CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Move lock release past "if" as suggested by Joel Fernandes. ]
[ paulmck: Fix caching of furthest-future requested grace period. ]

One problem with the ->need_future_gp[] array is that the grace-period
assignment of each element changes as the grace periods complete.
This means that it is necessary to hold a lock when checking this
array to learn if a given grace period has already been requested.
This increase lock contention, which is the opposite of helpful.
This commit therefore replaces the ->need_future_gp[] with a single
->gp_seq_needed value and keeps it updated in the rcu_data structure.

This will enable reliable lockless checking of whether or not a given
grace period has already been requested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq.  This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes the RCU CPU stall-warning code in print_other_cpu_stall(),
print_cpu_stall(), and check_cpu_stall() use ->gp_seq instead of ->gpnum
and ->completed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit converts the grace-period request code paths from ->completed
and ->gpnum to ->gp_seq.  The need_future_gp_element() macro encapsulates
the shift operation required to use ->gp_seq as an index to the
->need_future_gp[] array.  The rcu_cbs_completed() function is removed
in favor of the rcu_seq_snap() function.  The rcu_start_this_gp()
gets some temporary consistency checks and uses rcu_seq_done(),
rcu_seq_current(), rcu_seq_state(), and rcu_gp_in_progress() in place
of the earlier open-coded comparisons of ->gpnum and ->completed.
The rcu_future_gp_cleanup() function replaces use of ->completed
with ->gp_seq.  The rcu_accelerate_cbs() function replaces a call to
rcu_cbs_completed() with one to rcu_seq_snap().  The rcu_advance_cbs()
function replaces an access to >completed with one to ->gp_seq and adds
some temporary warnings.  The rcu_nocb_wait_gp() function replaces a
call to rcu_cbs_completed() with one to rcu_seq_snap() and an open-coded
comparison with rcu_seq_done().

The temporary warnings will be removed when the various ->gpnum and
->completed fields are removed.  Their purpose is to locate code who
might still be using ->gpnum and ->completed.  (Much easier that way
than trying to trace down the causes of too-short grace periods and
grace-period hangs!)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit switches the quiescent-state no-backtracking checks from
->gpnum and ->completed to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit switches the interrupt-disabled detection mechanism to
->gp_seq.  This mechanism is used as part of RCU CPU stall warnings,
and detects cases where the stall is due to a CPU having interrupts
disabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes rcu_gp_in_progress() use ->gp_seq instead of
->completed and ->gpnum.  The READ_ONCE() invocations are buried
in rcu_seq_current().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes rcu_try_advance_all_cbs() use ->gp_seq.  It uses
rcu_seq_ctr() in order to shift away the state bits, so that the
low-order bits of the result may safely be used to index ->nocb_gp_wq[].
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes rcu_try_advance_all_cbs() use ->gp_seq, with the
exception of tracing, which will be converted later.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit makes rcu_implicit_dynticks_qs() use ->gp_seq, with the
exception of tracing, which will be converted later.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit converts rcu_gpnum_ovf() to use ->gp_seq instead of ->gpnum.
Same size unsigned long, so same approach.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit moves __note_gp_changes(), note_gp_changes(), and
__rcu_pending() to ->gp_seq, creating new rcu_seq_completed_gp() and
rcu_seq_new_gp() functions for this purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Reinstate "cpuend: trace as suggested by Joel Fernandes. ]

This commit converts get_state_synchronize_rcu(), cond_synchronize_rcu(),
get_state_synchronize_sched(), and cond_synchronize_sched() from ->gpnum
and ->completed to ->gp_seq.  Note that this also introduces a full
memory barrier in the already-done paths off cond_synchronize_rcu() and
cond_synchronize_sched(), as work with LKMM indicates that the earlier
smp_load_acquire() were insufficiently strong in some situations where
these two functions were called just as the grace period ended.  In such
cases, these two functions would not gain the benefit of memory ordering
at the end of the grace period.

Please note that the performance impact is negligible, as you shouldn't
be using either function anywhere near a fastpath in any case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit switches the functions reporting quiescent states from
use of ->gpnum to ->gp_seq.  In either case, the point is to handle
races where a given grace period ends before a quiescent state can
be reported.  Failing to catch these races would result in too-short
grace periods, hence the checking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit switches rcu_check_gp_kthread_starvation() from printing
->gpnum and ->completed to printing ->gp_seq upon detecting a starving
RCU grace-period kthread during an RCU CPU stall warning.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The rcutorture test invokes rcu_batches_started(),
rcu_batches_completed(), rcu_batches_started_bh(),
rcu_batches_completed_bh(), rcu_batches_started_sched(), and
rcu_batches_completed_sched() to do grace-period consistency checks,
and rcuperf uses the _completed variants for statistics.
These functions use ->gpnum and ->completed.  This commit therefore
replaces them with rcu_get_gp_seq(), rcu_bh_get_gp_seq(), and
rcu_sched_get_gp_seq(), adjusting rcutorture and rcuperf to make
use of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit moves rcu_gp_slow() to ->gp_seq.  This function only uses
the grace-period number to modulate delay, so rcu_seq_ctr(rsp->gp_seq)
gets the same effect, at least in cases where the delay is to happen
more than four times per wrap of an unsigned long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds grace-period sequence numbers (->gp_seq) to the
rcu_state, rcu_node, and rcu_data structures, and updates them.
It also checks for consistency between rsp->gpnum and rsp->gp_seq.
These ->gp_seq counters will eventually replace the existing ->gpnum
and ->completed counters, allowing a single memory access to determine
whether or not a grace period is in progress and if so, which one.
This in turn will enable changes that will reduce ->lock contention on
the leaf rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Merge branches 'expedited.2018.07.12a', 'fixes.2018.07.12a', 'srcu.2018.06.25b' and 'torture.2018.06.25b' into HEAD

expedited.2018.07.12a: Expedited grace-period updates.
fixes.2018.07.12a: Pre-gp_seq miscellaneous fixes.
srcu.2018.06.25b: SRCU updates.
torture.2018.06.25b: Pre-gp_seq torture-test updates.

At the end of rcu_gp_cleanup(), if another grace period is needed, but
not via rcu_accelerate_cbs(), the ->gp_flags field is written twice,
once when making the new grace-period request, and once when clearing
all other types of requests.  This commit therefore adds an else-clause
to avoid this double write.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit causes a splat if RCU is idle and a request for a new grace
period is ignored for more than one second.  This splat normally indicates
that some code path asked for a new grace period, but failed to wake up
the RCU grace-period kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix bug located by Dan Carpenter and his static checker. ]
[ paulmck: Fix self-deadlock bug located 0day test robot. ]
[ paulmck: Disable unless CONFIG_PROVE_RCU=y. ]

Currently, the parallelized initialization of expedited grace periods uses
the workqueue associated with each rcu_node structure's ->grplo field.
This works fine unless that CPU is offline.  This commit therefore uses
the CPU corresponding to the lowest-numbered online CPU, or just queues
the work on WORK_CPU_UNBOUND if there are no online CPUs corresponding
to this rcu_node structure.

Note that this patch uses cpu_is_offline() instead of the usual approach
of checking bits in the rcu_node structure's ->qsmaskinitnext field.  This
is safe because preemption is disabled across both the cpu_is_offline()
check and the call to queue_work_on().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
[ paulmck: Disable preemption to close offline race window. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply Peter Zijlstra feedback on CPU selection. ]
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

There is a two-jiffy delay between the time that a CPU will self-report
an RCU CPU stall warning and the time that some other CPU will report a
warning on behalf of the first CPU.  This has worked well in the past,
but on busy systems, it is possible for the two warnings to overlap,
which makes interpreting them extremely difficult.

This commit therefore uses a cmpxchg-based timing decision that
allows only one report in a given one-minute period (assuming default
stall-warning Kconfig parameters).  This approach will of course fail
if you are seeing minute-long vCPU preemption, but in that case the
overlapping RCU CPU stall warnings are the least of your worries.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Sparse reported this:

| kernel/rcu/tree_plugin.h:814:9: warning: incorrect type in argument 1 (different modifiers)
| kernel/rcu/tree_plugin.h:814:9:    expected struct lockdep_map const *lock
| kernel/rcu/tree_plugin.h:814:9:    got struct lockdep_map [noderef] *<noident>

This is caused by using vanilla lockdep annotations on rcu_node::lock,
and that requires accessing ->lock of rcu_node directly. However we need
to keep rcu_node::lock __private to avoid breaking its extra ordering
guarantee. And we have a dedicated lockdep annotation for
rcu_node::lock, so use it.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp()) in
rcu_gp_cleanup() triggers (inexplicably, of course) every so often.
This commit therefore extracts more information.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds "#define pr_fmt(fmt) fmt" to the torture-test files
in order to keep the current dmesg format.  Once Joe's commits have
hit mainline, these definitions will be changed in order to automatically
generate the dmesg line prefix that the scripts expect.  This will have
the beneficial side-effect of allowing printk() formats to be used more
widely and of shortening some pr_*() lines.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Joe Perches <joe@perches.com>

Some bugs reproduce quickly only at high CPU-hotplug rates, so the
rcutorture TREE03 scenario now has only 200 milliseconds spacing between
CPU-hotplug operations.  At this rate, the torture-test pair of console
messages per operation becomes a bit voluminous.  This commit therefore
converts the torture-test set of "verbose" kernel-boot arguments from
bool to int, and prints the extra console messages only when verbose=2.
The default is still verbose=1.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Although warnings about close calls are printed by kvm-recheck.sh,
kvm-find-errors.sh currently ignores them.  This could easily result
in someone failing to investigate close calls, so this commit makes
them visible to kvm-find-errors.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The TREE08-T.boot file was used to provide alternative options for
debugging, but things have changed, it has not kept up, and it has not
been used or missed.  This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The torture scripting currently builds each kernel from a set of parallel
runs in its own build directory.  This can waste quite a bit of space when
running large numbers of concurrent scenarios, and pointlessly given that
the builds are run sequentially (albeit with a largish -j number passed to
"make").  This commit therefore places all build-command output in the
results directory, then does all builds in a single "b1" build directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Joel Fernandes is using SRCU to protect from-idle tracepoints, which
requires notrace variants of srcu_read_lock() and srcu_read_unlock()
in order to avoid problems with tracepoints in lockdep.  This commit
therefore adds srcu_read_lock_notrace() and srcu_read_unlock_notrace().

[1] http://lkml.kernel.org/r/20180427042656.190746-1-joelaf@google.comReported-by: Joel Fernandes <joelaf@google.com>
Intermittently-reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds the address of the first callback to the per-CPU rcutorture
output in order to allow lost wakeups to be more efficiently tracked down.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit updates the header comment of srcu_funnel_gp_start() to
document the fact that srcu_funnel_gp_start() does the work of
srcu_funnel_exp_start(), in some cases by invoking it directly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit simply changes some copy-pasta call_rcu() instances to
the correct call_srcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

During expedited grace-period initialization, a work item is scheduled
for each leaf rcu_node structure.  However, that initialization code
is itself (normally) executing from a workqueue, so one of the leaf
rcu_node structures could just as well be handled by that pre-existing
workqueue, and with less overhead.  This commit therefore uses a
shiny new rcu_is_leaf_node() macro to execute the last leaf rcu_node
structure's initialization directly from the pre-existing workqueue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...