- 25 Aug, 2015 14 commits
-
-
Bob Moore authored
ACPICA commit a9d9c2d0c2d077bb3175ec9c252cf0e5da3efd45 Was previously compile-time only. Add support option for acpiexec. Link: https://github.com/acpica/acpica/commit/a9d9c2d0Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit bba222c15c2ce79076eb3a5e9d4d5f7120db8a00 If "Objects" command is invoked with no arguments, the counts for each object type are displayed. Linux kernel is not affected by this commit as currently debugger is not enabled in the Linux kernel. Link: https://github.com/acpica/acpica/commit/bba222c1Signed-off-by:
-
Bob Moore authored
ACPICA commit 74094ca9f51e2652a9b5f01722d8640a653cc75a For _REG methods and module-level code blocks. For acpiexec, add deletion of module-level blocks in case of an early abort. Link: https://github.com/acpica/acpica/commit/74094ca9Signed-off-by:
-
Bob Moore authored
ACPICA commit 93862bd7a227543bc617d822ef5c4f8a5d68b519 Add output of table OEM ID along with signature to support lots of SSDTs. Cleanup use of table pointers. Link: https://github.com/acpica/acpica/commit/93862bd7Signed-off-by:
-
Bob Moore authored
ACPICA commit ca3bd4c5cdc39a9009280032adbbc20f34e94c47 Fix a couple of issues with >40 ACPI tables. Return exit error for acpinames to enable use with BIOS builds. The new exported function is used by acpinames. For Linux kernel, this change is a no-op. Link: https://github.com/acpica/acpica/commit/ca3bd4c5Signed-off-by:
-
Bob Moore authored
ACPICA commit 0ecf5b5a41c3d2e09af48f0fdbc9ae784f631788 - Add wilcard support for input filenames. - Add -l option to load tables and exit, no display. This is useful for validation of the namespace during BIOS generation. - Add -x option for specifying debug level. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/0ecf5b5aSigned-off-by:
-
Bob Moore authored
ACPICA commit 539f8c03fe64305725bd85343e42f3b6c42aad14 A couple typos and long lines. Link: https://github.com/acpica/acpica/commit/539f8c03Signed-off-by:
-
Lv Zheng authored
ACPICA commit 3f42ba76e2a0453976d3108296d5f656fdf2bd6e In this patch, FACS table mapping is also tuned a bit so that only the selected FACS table will be mapped by the OSPM (mapped on demand) and the FACS related global variables can be reduced. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3f42ba76Signed-off-by:
-
Lv Zheng authored
ACPICA commit c0b38b4c3982c2336ee92a2a14716107248bd941 The fixed table indexes leave holes in the global table list: 1. One hole can be seen when there is only 1 FACS provided by the BIOS. 2. Tow holes can be seen when it is a reduced hardware platform. The holes do not break OSPMs but have broken ACPI debugger "tables" command. Also the "fixed table indexes" mechanism may make the descriptors of the standard tables installed earlier than DSDT to be overwritten by the descriptors of the fixed tables. For example, FACP disappears from the global table list after DSDT is installed. This patch fixes all above issues by removing the "fixed table indexes" mechanism which is too complicated to be maintained in a regression safe manner. After removal, the table loader will determine the indexes of the fixed tables. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c0b38b4cSigned-off-by:
-
Bob Moore authored
ACPICA commit 4ccf8a1cc499ec8f00345f662a5887483980e1dd Small cleanup of messages. Link: https://github.com/acpica/acpica/commit/4ccf8a1cSigned-off-by:
-
Bob Moore authored
ACPICA commit 2ed09bb7619d25f5a5c065c33a8a775a6db3a856 ACPICA commit 2fefacf73825b0ec96bbfc4f70a256735b715d6c This mode emits AML code along with the ASL code. A new global was needed to ensure the listing mode is completely separate from the debugger verbose mode. Emits the correct AML offset for the AML code. The -l option now works for both the compiler and disassembler. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/2fefacf7 Link: https://github.com/acpica/acpica/commit/2ed09bb7Signed-off-by:
-
Bob Moore authored
ACPICA commit 51ab555e60b4a3de3cc4a846e86d0de255be441a Add additional validation for the table signature and the OEM strings. Eliminates buffer read overrun in data_table_region. ACPICA BZ 1184. Link: https://bugs.acpica.org/show_bug.cgi?id=1184 Link: https://github.com/acpica/acpica/commit/51ab555eSigned-off-by:
-
Bob Moore authored
ACPICA commit 6d9c827b540837b6e54059e17756a06985e4a196 ACPICA BZ 1176. Link: https://bugs.acpica.org/show_bug.cgi?id=1176 Link: https://github.com/acpica/acpica/commit/6d9c827bSigned-off-by:
-
Bob Moore authored
ACPICA commit ed7769e832de6c7ba90615480d916c85fd100422 If a table load fails, delete all namespace objects created by the table, otherwise these objects will be uninitialized, causing problems later. This appears to be a very rare problem. Also handle the unitialized node problem to prevent possible faults. ACPICA BZ 1185. Link: https://github.com/acpica/acpica/commit/ed7769e8Signed-off-by:
-
- 23 Jul, 2015 22 commits
-
-
Bob Moore authored
ACPICA commit 8580ce04c1b7aa415c364b06e79edb8aca77dded Version 20150717. Link: https://github.com/acpica/acpica/commit/8580ce04Signed-off-by:
-
Bob Moore authored
ACPICA commit add72dca18ab5d02f1bf9b08027570e58da520e8 This mode will emit AML byte code after each ASL statement. This is a prototype only and requires additional development. This patch only affects ACPICA disassembler which is not in the kernel source tree. Link: https://github.com/acpica/acpica/commit/add72dcaSigned-off-by:
-
Lv Zheng authored
ACPICA commit 2164923d60429eea7cd5a4a8629b607af7325afa Some disassembler APIs should rather be debugger APIs. This patch moves them to the debugger folder to be ready for debugger porting. Since there is no in-kernel ACPICA debugger in the kernel source tree, this patch doesn't affect the Linux kernel. Link: https://github.com/acpica/acpica/commit/2164923dSigned-off-by:
-
Lv Zheng authored
ACPICA commit 310e0ae1c4730f4dadc80125125099ab76851499 arg_types in struct acpi_db_method_info is only referenced by ACPI_DEBUGGER. This patch only affects ACPICA debugger which is only used by a non-kernel tool - acpiexec, so Linux kernel is currently not affected by this patch. Link: https://github.com/acpica/acpica/commit/310e0ae1Signed-off-by:
-
Bob Moore authored
ACPICA commit 55fa9555c71eaa99daebed4cd82cfde3875e8c45 In addition to the existing support for the client table. Link: https://github.com/acpica/acpica/commit/55fa9555Signed-off-by:
-
Bob Moore authored
ACPICA commit f88814201e01043a4f8caa69a69b799af11c44a3 These were defined in two places. Changed to ACPI_SIGN* names and define them once in acmacros.h This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/f8881420Signed-off-by:
-
Bob Moore authored
ACPICA commit 7c490c28a18b435c543c6b410e7e7c2131fccc78 ACPICA implements all non-ANSI functions locally. However, there are sometimes two or more versions of the same function throughout the ACPICA code. This change fixes this. Adds a new file, utilities/utnonansi.c Link: https://github.com/acpica/acpica/commit/7c490c28Signed-off-by:
-
Lv Zheng authored
ACPICA commit 49c6a6517a906900e9baa51ad5859beeb8a3089f The following error logs can be seen for calloc/free/malloc/realloc that defined in the stdlib.h: ...\stdlib.h(281) : error C2059: syntax error : ',' ...\stdlib.h(281) : error C2143: syntax error : missing ')' before 'constant' ...\stdlib.h(281) : error C2143: syntax error : missing '{' before 'constant' ...\stdlib.h(281) : error C2059: syntax error : '<Unknown>' ...\stdlib.h(281) : error C2059: syntax error : ')' This is caused by the wrong inclusion order of stdlib.h/crtdbg.h introduced in acenv.h. This patch fixes this breakage. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/49c6a651Signed-off-by: -
Bob Moore authored
ACPICA commit eb9f8cb9fd65f1149dd335d05944c31cbca41af3 1) Warn if a Local is set but never used 2) Warn if a arg_x is never used (for non-predefined method names) 3) Warn if a arg_x that is used as a local is never used This patch only affects iASL which is not in the kernel source tree. Link: https://github.com/acpica/acpica/commit/eb9f8cb9Signed-off-by:
-
Markus Elfring authored
ACPICA commit f9fd6e8bad0f16ce2b436c5cda36ced0c2d85302 Reported by Markus Elfring. Link: https://github.com/acpica/acpica/commit/f9fd6e8bSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Lv Zheng authored
ACPICA commit c832b0a9263c560b3ae3ae31d7298ef33988f8d5 This patch removes one redundant debugging output of opcode execution which has already been covered by acpi_ex_start_trace_opcode(). Lv Zheng. Link: https://github.com/acpica/acpica/commit/c832b0a9Signed-off-by:
-
Lv Zheng authored
ACPICA commit 61e9e20aadfaa03184d0959fbdc1fa5cdfea2551 This patch adds option to bypass opcode tracing. The option can be used to reduce the trace message output. Lv Zheng. Link: https://github.com/acpica/acpica/commit/61e9e20aSigned-off-by:
-
Lv Zheng authored
ACPICA commit e8e4a9b19d0b72a7b165398bdc961fc2f6f502ec This patch adds OSL trace hook support. OSPMs are encouraged to use acpi_os_trace_point() with ACPI_USE_SYSTEM_TRACER defined to implement platform specific trace facility. Lv Zheng. Link: https://github.com/acpica/acpica/commit/e8e4a9b1Signed-off-by:
-
Lv Zheng authored
ACPICA commit 07fffd02607685b655ed92ee15c160e6a810b60b The acpi_debug_trace() is the mechanism known as ACPI method tracing that is used by Linux as ACPICA debugging message reducer. This facility can be controlled through Linux ACPI subsystem - /sys/module/acpi/parameters. This facility requires CONFIG_ACPI_DEBUG to be enabled to see ACPICA trace logs in the kernel dmesg output. This patch enhances acpi_debug_trace() to make it not only a message reducer, but a real tracer to trace AML interpreter execution. Note that in addition to the AML tracer enabling, this patch also updates the facility with the following enhancements: 1. Allow a full path to be specified by the acpi_debug_trace() API. 2. Allow any method rather than just the entrance of acpi_evaluate_object() to be traced. 3. All interpreter ACPI_LV_TRACE_POINT messages are collected for ACPI_EXECUTER layer. The Makefile of drivers/acpi/acpica is also updated to include exdebug.o and the duplicated stubs are removed after that. Note that since this patch has enhanced the method tracing facility, Linux need also be updated after applying this patch. Lv Zheng. Link: https://github.com/acpica/acpica/commit/07fffd02Signed-off-by:
-
Lv Zheng authored
ACPICA commit 71299ec8b49054daace0df50268e8e055654ca37 This patch adds trace point at the following point: 1. Begin/end of a control method execution; 2. Begin/end of an opcode execution. The trace point feature can be enabled by defining ACPI_DEBUG_OUTPUT and specifying a debug level that includes ACPI_LV_TRACDE_POINT and the debug layers that include ACPI_PARSER and ACPI_DISPACTCHER. In order to make aml_op_name of union acpi_parse_object usable for tracer, it is enabled for ACPI_DEBUG_OUTPUT in this patch. Lv Zheng. Link: https://github.com/acpica/acpica/commit/71299ec8Signed-off-by:
-
Lv Zheng authored
ACPICA commit c8275e243b58fd4adfc0362bd704af41ed14bc75 This patch moves parts of acpi_dm_dump_method_info() to the dispatcher component. This patch also makes the new function dependent on ACPI_DEBUG_OUTPUT compile-stage definition so that it can be used by the trace facility. acpi_dm_dump_method_info() traverses method stack when an exception is encountered. Such traversal is needed to support method tracing for the exceptions. When an exception is encountered, the end indications of the aborted methods should be logged in order not to break the user space analysis tool. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c8275e24Signed-off-by:
-
Lv Zheng authored
ACPICA commit 6e0229bb156d71675f2e07dc7960adb7ec0a60ea This patch adds functions to return normalized full path instead of "external path". The external path contains trailing "_" for each name segment while the normalized full path doesn't contain the trailing "_". Currently this function is used by the method tracing users to specify a none trailing "_" attached name path. Lv Zheng. Note that we need to validate and switch all Linux kernel acpi_get_name() users to use the new name type before removing the old name type from ACPICA. Link: https://github.com/acpica/acpica/commit/6e0229bbSigned-off-by:
Ruiyi Zhang <ruiyi_zhang@hotmail.com> Signed-off-by:
-
Lv Zheng authored
ACPICA commit 9dcd124e914e87495fbd1786d9484b962e0823e0 This patch adds back pointing reference of the namespace node for a method operand. The namespace node then can be used in acpi_ds_terminate_control_method() to obtain method full path to be used by tracing facilities. Lv Zheng. Link: https://github.com/acpica/acpica/commit/9dcd124eSigned-off-by:
-
Lv Zheng authored
ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4 This patch cleans up the code of assigning the AML address to the union acpi_operand_object. The idea behind this cleanup is: The AML address of the union acpi_operand_object should always be determined at the point where the object is encountered. It should be started from the first byte of the object. For example, the opcode of the object, the name string of the user_term object, or the first byte of the packaged object (where a pkg_length is prefixed). So it's not cleaner to have it assigned here and there in the entire ACPICA source tree. There are some special cases for the internal opcodes, before cleaning up the internal opcodes, we should also determine the rules for the AML addresses of the internal opcodes: 1. INT_NAMEPATH_OP: the address of the first byte for the name_string. 2. INT_METHODCALL_OP: the address of the first byte for the name_string. 3. INT_BYTELIST_OP: the address of the first byte for the byte_data list. 4. INT_EVAL_SUBTREE_OP: the address of the first byte for the Region/Package/Buffer/bank_field/Field arguments. 5. INT_NAMEDFIELD_OP: the address to the name_seg. 6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix. 7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix. 8. INT_CONNECTION_OP: the address to the 0x02 prefix. 9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix. 10.INT_RETURN_VALUE_OP: the address of the replaced operand. 11.computational_data: the address to the Byte/Word/Dword/Qword/string_prefix. Before cleaning up the internal root scope of the aml_walk, turning it into the term_list, we need to remember the aml_start address as the "Aml" attribute for the union acpi_operand_object created by acpi_ps_create_scope_op(). Finally, we can delete some redundant AML address assignment in psloop.c. Link: https://github.com/acpica/acpica/commit/afb52611Signed-off-by: -
Lv Zheng authored
ACPICA commit 61b360074fde2bb8282722579410f5d1fb12f84d This patch converts aml_offset in union acpi_operand_object to AML address. AML offset is actually only used by the debugger, using AML address is more direct and efficient during the parsing stage so that we don't need to calculate the offset during the parsing stage and will not have difficulities in converting it into other offset attributes. Sometimes, aml_offset is not an indication of the offset from the table header but the offset from the entry of a list of terms, which requires additional efforts to convert it into an offset from the table header. By using AML address directly, there is no such difficulty. Thus this patch also deletes a logic in disassembler that is trying to convert the aml_offset from "offset from the start address of Method/Package/Buffer" into the "offset from the start address of the ACPI table" (Sample code deletion can be seen in acpi_dm_deferred_parse(), but the function is not in the Linux kernel). Lv Zheng. Link: https://github.com/acpica/acpica/commit/61b36007Signed-off-by:
-
Lv Zheng authored
ACPICA commit d254405814495058276c0c2f9d96794d15a6c91c This patch converts aml_offset in struct acpi_walk_state to AML address. AML offset is actually only used by the debugger, using AML address is more direct and efficient during the parsing stage so that we don't need to calculate it during the parsing stage. On the other hand, we can see several issues in the current parser logic around the aml_offset: 1. union acpi_operand_object.Common.aml_offset is redundantly assigned in acpi_ps_parse_loop(). 2. aml_offset is not an indication of the offset from the table header but the offset from the entry of a list of objects. Sometimes, it indicates an entry for a Method/Package/Buffer, which makes it difficult to be reversely calculated to a table header offset. 3. When being used with method tracers (for example, Linux function trace), it's better to have AML address logged instead of the AML offset because the address is the only attribute that can uniquely identify the opcode. This patch is required to solve the above issues. Lv Zheng. Link: https://github.com/acpica/acpica/commit/d2544058Signed-off-by:
-
Lv Zheng authored
This patch reduces divergences in parser/namespace components so that the follow-up linuxized ACPICA upstream commits can be directly merged. Including the fix to an indent issue reported and fixed by Zhouyi Zhou. Signed-off-by:
Zhouyi Zhou <yizhouzhou@ict.ac.cn> Signed-off-by:
-
- 19 Jul, 2015 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two fairly simple fixes: one is a change that causes us to have a very low queue depth leading to performance issues and the other is a null deref occasionally in tapes thanks to use after put" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fix host max depth checking for the 'queue_depth' sysfs interface st: null pointer dereference panic caused by use after kref_put by st_open
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename. -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "A memory leak fix from Christophe Jaillet which was introduced with kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days" * 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: mm: Fix a memory leak related to pmd not attached to the pgd
-
