- 31 Jul, 2018 2 commits
-
-
Mathieu Xhonneux authored
The seg6local LWT provides the End.DT6 action, which allows to decapsulate an outer IPv6 header containing a Segment Routing Header (SRH), full specification is available here: https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-05 This patch adds this action now to the seg6local BPF interface. Since it is not mandatory that the inner IPv6 header also contains a SRH, seg6_bpf_srh_state has been extended with a pointer to a possible SRH of the outermost IPv6 header. This helps assessing if the validation must be triggered or not, and avoids some calls to ipv6_find_hdr. v3: s/1/true, s/0/false for boolean values v2: - changed true/false -> 1/0 - preempt_enable no longer called in first conditional block Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Thomas Richter authored
Commit 531b014e ("tools: bpf: make use of reallocarray") causes a compiler error when building the perf tool in the linux-next tree. Compile file tools/lib/bpf/libbpf.c on a FEDORA 28 installation with gcc compiler version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20) shows this error message: [root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" [...] make -f /home6/tmricht/linux-next/tools/build/Makefile.build dir=./util/scripting-engines obj=libperf libbpf.c: In function ‘bpf_object__elf_collect’: libbpf.c:811:15: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result] strerror_r(-err, errmsg, sizeof(errmsg)); ^ cc1: all warnings being treated as errors mv: cannot stat './.libbpf.o.tmp': No such file or directory /home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed Replace all occurrences of strerror() by calls to strerror_r(). To keep the compiler quiet also use the return value from strerror_r() otherwise a 'variable set but not use' warning which is treated as error terminates the compile. Fixes: 531b014e ("tools: bpf: make use of reallocarray") Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 27 Jul, 2018 19 commits
-
-
Daniel Borkmann authored
Tobin C. Harding says: ==================== Recently BPF docs were converted to RST format. A couple of things were missed: - Use 'index.rst' instead of 'README.rst'. Although README.rst will work just fine it is more typical to keep the subdirectory indices in a file called 'index.rst'. - Integrate files Documentation/bpf/*.rst into build system using toctree in Documentation/bpf/index.rst - Include bpf/index in top level toctree so bpf is indexed in the main kernel docs. - Make anal change to heading format (inline with rest of Documentation/). ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Tobin C. Harding authored
The majority of files in the kernel documentation index use capitalisation for all words, especially the shorter ones. BPF docs better fit in with the rest of the documentation if the heading is all capitalised. Capitalise document heading. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Tobin C. Harding authored
Recently bpf docs were converted to RST format. The new files were not added to the top level toctree. This causes build system to emit a warning of type WARNING: document isn't included in any toctree Add bpf/index.rst to Documentation/index.rst Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Tobin C. Harding authored
Recently bpf/ docs were converted to us RST format. bp/index.rst was created out of README but toctree was not added to include files within Documentation/bpf/ Add toctree to Documentation/bpf/index.rst Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Tobin C. Harding authored
Recently bpf/ docs were converted to use RST format. 'README.rst' was created but in order to fit in with the Sphinx build system this file should be named 'index.rst'. Rename file, fixes to integrate into Sphinx build system in following patches. docs: Rename Documentation/bpf/README.rst to Documentation/bpf/index.rst Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Daniel Borkmann authored
Jakub Kicinski says: ==================== This set converts xdpsock_user.c and xdp_fwd_user.c to use libbpf instead of bpf_load.o. First two patches are minor improvements to libbpf to make the conversion (and use of libbpf in general) nicer. ==================== Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Convert xdpsock_user.c to use libbpf instead of bpf_load.o. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Allow users to find programs by section names. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
bpf_map__fd() handles NULL map gracefully and returns -EINVAL. bpf_program__fd() and bpf_program__nth_fd() crash in this case. Make the behaviour more consistent by validating prog pointer as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Daniel Borkmann authored
Jakub Kicinski says: ==================== This set is focused on improving the performance of perf events reported from BPF offload. Perf events can now be received on packet data queues, which significantly improves the performance (from total of 0.5 Msps to 5Msps per core). To get to this performance we need a fast path for control messages which will operate on raw buffers and recycle them immediately. Patch 5 replaces the map pointers for perf maps with map IDs. We look the pointers up in a hashtable, anyway, to validate they are correct, so there is no performance difference. Map IDs have the advantage of being easier to understand for users in case of errors (we no longer print raw pointers to the logs). Last patch improves info messages about map offload. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
FW can put constraints on map element size to maximize resource use and efficiency. When user attempts offload of a map which does not fit into those constraints an informational message is printed to kernel logs to inform user about the reason offload failed. Map offload does not have access to any advanced error reporting like verifier log or extack. There is also currently no way for us to nicely expose the FW capabilities to user space. Given all those constraints we should make sure log messages are as informative as possible. Improve them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Record perf maps by map ID, not raw kernel pointer. This helps with debug messages, because printing pointers to logs is frowned upon, and makes debug easier for the users, as map ID is something they should be more familiar with. Note that perf maps are offload neutral, therefore IDs won't be orphaned. While at it use a rate limited print helper for the error message. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Control queue is fairly low latency, and requires SKB allocations, which means we can't even reach 0.5Msps with perf events. Allow perf events to be delivered to data queues. This allows us to not only use multiple queues, but also receive and deliver to user space more than 5Msps per queue (Xeon E5-2630 v4 2.20GHz, no retpolines). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
In preparation for SKB-less perf event handling make nfp_bpf_event_output() take buffer address and length, not SKB as parameters. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Port id 0xffffffff is reserved for control messages. Allow reception of messages with this id on data queues. Hand off a raw buffer to the higher layer code, without allocating SKB for max efficiency. The RX handle can't modify or keep the buffer, after it returns buffer is handed back over to the NIC RX free buffer list. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jakub Kicinski authored
Representor packets are received on PF queues with special metadata tag for demux. There is no reason to resolve the representor ID -> netdev after the skb has been allocated. Move the code, this will allow us to handle special FW messages without SKB allocation overhead. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Taeung Song authored
To smoothly test BTF supported binary on samples/bpf, let samples/bpf/Makefile probe llc, pahole and llvm-objcopy for BPF support and use them like tools/testing/selftests/bpf/Makefile changed from the commit c0fa1b6c ("bpf: btf: Add BTF tests"). Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Brian Brooks authored
Define u_smp_rmb() and u_smp_wmb() to respective barrier instructions. This ensures the processor will order accesses to queue indices against accesses to queue ring entries. Signed-off-by: Brian Brooks <brian.brooks@linaro.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 26 Jul, 2018 1 commit
-
-
Taeung Song authored
For untracked things of tools/bpf, add this. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 25 Jul, 2018 2 commits
-
-
Jeremy Cline authored
Adjust tcp_client.py and tcp_server.py to work with Python 3 by using the print function, marking string literals as bytes, and using the newer exception syntax. This should be functionally equivalent and supports Python 3+. Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
YueHaibing authored
Fix inconsistent IS_ERR and PTR_ERR in get_btf, the proper pointer to be passed as argument is '*btf' This issue was detected with the help of Coccinelle. Fixes: 2d3feca8 ("bpf: btf: print map dump and lookup with btf info") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 24 Jul, 2018 16 commits
-
-
Nishanth Devarajan authored
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets according to their skb->priority field. Under congestion, already-enqueued lower priority packets will be dropped to make space available for higher priority packets. Skbprio was conceived as a solution for denial-of-service defenses that need to route packets with different priorities as a means to overcome DoS attacks. v5 *Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set default sch->limit to 64. v4 *Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man page for Skbprio, in iproute2. v3 *Drop max_limit parameter in struct skbprio_sched_data and instead use sch->limit. *Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for qdisc (previously being referenced every time qdisc changes). *Move qdisc's detailed description from in-code to Documentation/networking. *When qdisc is saturated, enqueue incoming packet first before dequeueing lowest priority packet in queue - improves usage of call stack registers. *Introduce and use overlimit stat to keep track of number of dropped packets. v2 *Use skb->priority field rather than DS field. Rename queueing discipline as SKB Priority Queue (previously Gatekeeper Priority Queue). *Queueing discipline is made classful to expose Skbprio's internal priority queues. Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by: Cody Doucette <doucette@bu.edu> Reviewed-by: Michel Machado <michel@digirati.com.br> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== net whitespace cleanups Ran script that I use to check for trailing whitespace and blank lines at end of files across all files in net/ directory. These are errors that checkpatch reports and git flags. These are the resulting fixes broken up mostly by subsystem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Remove trailing whitespace and extra lines at EOF Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Remove blank line at EOF and trailing whitespace. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-