This patch removes the parent clock 'ethif' in bindings, since we don't
need to control the parent of a clock in current clock framework.

Moreover, the clocks are get by name in the driver, thus this change
does not break backwards compatibility.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch removes redundant clock setting for 'clk_ethif', which is
the parent of 'clk_cryp'. Hence, we just need to handle its child.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The test considers a party that already has a private-public
key pair and a party that provides a NULL key. The kernel will
generate the private-public key pair for the latter, computes
the shared secret on both ends and verifies if it's the same.

The explicit private-public key pair was copied from
the previous test vector.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for generating ecc private keys.

Generation of ecc private keys is helpful in a user-space to kernel
ecdh offload because the keys are not revealed to user-space. Private
key generation is also helpful to implement forward secrecy.

If the user provides a NULL ecc private key, the kernel will generate it
and further use it for ecdh.

Move ecdh's object files below drbg's. drbg must be present in the kernel
at the time of calling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Register the Symmetric crypto algorithms supported by
CNN55XX driver with crypto subsystem.

The following Symmetric crypto algorithms are supported,
  - aes with cbc, ecb, cfb, xts, ctr and cts modes
  - des3_ede with cbc and ecb modes
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add debugfs support in CNN55XX Physical Function driver.
Provides hardware counters and firmware information.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Physical Function driver support for CNN55XX crypto adapters.
CNN55XX adapters belongs to Cavium NITROX family series,
which accelerate both Symmetric and Asymmetric crypto workloads.

These adapters have crypto engines that need firmware
to become operational.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We forgot to set the error code on this path so it could result in
returning NULL which leads to a NULL dereference.

Fixes: db6c43bd ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Initialise ctr_completion variable before use.
Signed-off-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

crypto_akcipher_maxsize() now returns an unsigned int.
Remove the unnecessary check.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_akcipher_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As of now, crypto_akcipher_maxsize() can not be reached without
successfully setting the key for the transformation. akcipher
algorithm implementations check if the key was set and then return
the output buffer size required for the given key.

Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
akcipher algorithm implementations will remove the check if key is not NULL
and directly return the max size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.

nbytes has no sense now, remove it and directly return the maxsize.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_kpp_maxsize() asks for the output buffer size without
caring for errors. It allways assume that will be called after
a valid setkey. Comply with it and return what he wants.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As of now, crypto_kpp_maxsize() can not be reached without successfully
setting the key for the transformation. kpp algorithm implementations
check if the key was set and then return the output buffer size
required for the given key.

Change the return type to unsigned int and always assume that this
function is called after a successful setkey of the transformation.
kpp algorithm implementations will remove the check if key is not NULL
and directly return the max size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

setkey can be called multiple times during the existence
of the transformation object. In case of multiple setkey calls,
the old key was not freed and we leaked memory.
Free the old MPI key if any.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rename ecdh_make_pub_key() to ecc_make_pub_key().
ecdh_make_pub_key() is not dh specific and the reference
to dh is wrong.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ecc software implementation works with chunks of u64 data. There were some
unnecessary casts to u8 and then back to u64 for the ecc keys. This patch
removes the unnecessary casts.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While here, add missing argument description (ndigits).
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A new cryptographic engine driver was added in
drivers/crypto/inside-secure. Add myself as a maintainer for this
driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for Inside Secure SafeXcel EIP197 cryptographic engine,
which can be found on Marvell Armada 7k and 8k boards. This driver
currently implements: ecb(aes), cbc(aes), sha1, sha224, sha256 and
hmac(sah1) algorithms.

Two firmwares are needed for this engine to work. Their are mostly used
for more advanced operations than the ones supported (as of now), but we
still need them to pass the data to the internal cryptographic engine.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This was previously missed from the code, causing SDMA to hang in
some cases where the buffer ended up being not aligned.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently there is an interesting corner case failure with omap-sham
driver, if the finalize call is done separately with no data, but
all previous data has already been processed. In this case, it is not
possible to close the hash with the hardware without providing any data,
so we get incorrect results. Fix this by adjusting the size of data
sent to the hardware crypto engine in case the non-final data size falls
on the block size boundary, by reducing the amount of data sent by one
full block. This makes it sure that we always have some data available
for the finalize call and we can close the hash properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, the hash later code only handles the cases when we have
either new data coming in with the request or old data in the buffer,
but not the combination when we have both. Fix this by changing the
ordering of the code a bit and handling both cases properly
simultaneously if needed. Also, fix an issue with omap_sham_update
that surfaces with this fix, so that the code checks the bufcnt
instead of total data amount against buffer length to avoid any
buffer overflows.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

OMAP AES hw supports AES-GCM mode. This patch adds support for GCM and
RFC4106 GCM mode in omap-aes driver. The GCM implementation is mostly
written into its own source file, which gets built into the same driver
binary as the existing AES support.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: forward port to latest upstream kernel, conversion to use
 omap-crypto lib and some additional fixes]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

These are going to be required by the addition of the GCM support.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move over most of the omap-aes driver internal definitions to a separate
header file. This is done so that the same definitions can be used in
the upcoming AES-GCM support code.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the SG alignment APIs from the OMAP crypto support library instead
of using own implementations.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the SG alignment APIs from the OMAP crypto support library instead
of using own implementations. This reduces the amount of copy-paste
code.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This contains the generic APIs for aligning SG buffers.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the driver to use autosuspend for runtime_pm. This boosts the
performance, and optimizes the power consumption for the driver. By
default, the timeout value for autosuspend is set to one second.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

OMAP DES crypto accelerator itself is unable to detect weak keys, so
add a specific call to the generic des driver to check the key strength
if requested.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

AES can have multiple HW accelerator cores in the system, in which case
each core has its own crypto engine in use. Currently, the used hardware
device is stored under the omap_aes_ctx struct, which is global for
the algorithm itself, causing conflicts when used with multiple cores.
Fix this by moving the used HW device under reqctx, which is stored
per-request basis.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This is not used for anything, so drop it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This fixes the following warning when building with clang:

crypto/rng.c:35:34: error: unused function '__crypto_rng_cast'
    [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When a hw_random device's quality is non-zero, it will automatically be
used to fill the kernel's entropy pool.  Since timeriomem_rng is used by
many different devices, the quality needs to be provided by platform
data or device tree.
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>