- 22 Jul, 2014 32 commits
-
-
Hans Verkuil authored
Regression fix: V4L2_PIX_FMT_PRIV_MAGIC should only be set for the VIDEO_CAPTURE and VIDEO_OUTPUT buffer types, and not for any others. In the case of the win format this overwrote a pointer value that is passed in from userspace. Just set it for V4L2_BUF_TYPE_VIDEO_CAPTURE and OUTPUT only. Set it before the callback is called, just as is done for try/s_fmt, and again afterwards in case the driver zeroed it. The latter was missing in try/s_fmt, so add it there as well. Currently it is quite likely that drivers clear priv (that was needed for a long time), so it makes sense to set it twice. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
V4L2_CAP_EXT_PIX_FORMAT is set for capabilities, but it needs to be set for device_caps as well: device_caps should report all caps relevant to the device node, and this is one of them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
V4L2_CID_BASE_LASTP1 should be V4L2_CID_LASTP1. This has probably been wrong since the earliest days of this documentation until I did a copy-and-paste and found out that V4L2_CID_BASE_LASTP1 doesn't actually exist :-) Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
If you have a maximum that is at the limit of what the type supports, and the step is > 1, then you can get wrap-around errors since the code assumes that the maximum that the type supports is ctrl->maximum + ctrl->step / 2. In practice this is always fine, but in artificially crafted ranges you will hit this bug. Since this is core code it should just work. This bug has always been there but since it doesn't cause problems in practice it was never noticed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Add defines for the start line numbers of each field for both 525 and 625 line formats. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
While working with raw and sliced VBI support in several applications I noticed that you really need to know the start linenumbers for each video field in order to correctly convert the start line numbers reported by v4l2_vbi_format to the line numbers used in v4l2_sliced_vbi_format. This patch adds four defines that specify the start lines for each field for both 525 and 625 line standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Added a blank line after variable declarations where checkpatch requested that, and removed the 'write to the FSF' paragraph, again as requested. This is in preparation of the move out of staging into drivers/media. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
This prepares the driver for moving out of staging. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
The fact that the pixelformat is using a packed RGB format has nothing to do with the colorspace that is being used. Those are very different things. The colorspace decides what color a triplet of RGB numbers actually map to. E.g. a red color with values (255, 0, 0) is a different type of red depending on the colorspace. If the original pixelformat was e.g. YUV in colorspace REC709, then after the conversion to RGB the colorspace is still REC709. Unless the hardware actually converted the colorspace as well from REC709 to sRGB, but that rarely if ever happens. Remove this incorrect comment. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
The original report from Nikhil was that if data_offset > 0 and bytesused == 0, then the check in __verify_length() would fail, even though the spec says that if bytes_used == 0, then it will be replaced by the actual length of the buffer. After digging into it a bit more I realized that there were several other things wrong: - in __verify_length() it would use the application-provided length value for USERPTR and the vb2 core length for other memory models, but it should have used the application-provided length as well for DMABUF. - in __fill_vb2_buffer() on the other hand it would replace bytesused == 0 by the application-provided length, even for MMAP buffers where the length is determined by the vb2 core. - in __fill_vb2_buffer() it tries to figure out if all the planes have bytesused == 0 before it will decide to replace bytesused by length. However, the spec makes no such provision, and it makes for convoluted code. So just replace any bytesused == 0 by the proper length. The idea behind this was that you could use bytesused to signal empty planes, something that is currently not supported. But that is better done in the future by using one of the reserved fields in strucy v4l2_plane. This patch fixes all these issues. Regards, Hans Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Nikhil Devshatwar <nikhil.nd@ti.com> Cc: Nikhil Devshatwar <nikhil.nd@ti.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Fill FMT buffer size field in order to inform app which will be used streaming buffer size. Currently driver doesn't allow buffer size value proposed by application. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
SDR API is very new and surprises may occur. Due to that print notice to remind possible users. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Enable two native formats, V4L2_SDR_FMT_CS8 and V4L2_SDR_FMT_CS14LE. Move emulated formats behind module parameter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
MSi3101 driver is moved out of staging and renamed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Move msi3101 out of staging and rename to msi2500. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Fill FMT buffer size field in order to inform app which will be used streaming buffer size. Currently driver doesn't allow buffer size value proposed by application. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
New field buffersize was added to inform application maximum buffer size used. Add it to documentation too. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Fill FMT buffer size field in order to inform app which will be used streaming buffer size. Currently driver doesn't allow buffer size value proposed by application. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Add buffer size field to struct v4l2_sdr_format. It is used for negotiate streaming buffer size between application and driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Matthias Schwarzott authored
This is needed for PCTV 522e support. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Matthias Schwarzott authored
This is needed for PCTV 522e support. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Matthias Schwarzott authored
Modify all users of si2157_config to correctly initialize all not listed values to 0. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Matthias Schwarzott authored
Modify all users of si2157_config to correctly initialize all not listed values to 0. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Olli Salonen authored
The struct prototype is defined at the beginning of the code as "si2157_ops" but the real struct is called "si2157_tuner_ops". This is causing the name to be empty on this info msg: si2157 16-0060: si2157: found a '' in cold state [crope@iki.fi: commit msg from Luis email reply] Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Cc: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
This adds support for the Si2168-A20 firmware download. Extracting the firmware: wget http://www.tbsdtv.com/download/document/tbs6281/tbs6281-t2-t-driver_v1.0.0.6.zip unzip tbs6281-t2-t-driver_v1.0.0.6.zip dd if=tbs-6281_x64/tbs6281_64.sys of=dvb-demod-si2168-a20-01.fw count=28656 bs=1 skip=1625088 md5sum: 32e06713b33915f674bfb2c209beaea5 /lib/firmware/dvb-demod-si2168-a20-01.fw Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
Testing demod presence on probe fails if the demod was sleep mode. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
In case of failure the return value was always 0. Return proper error code (ENODEV) instead. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Olli Salonen authored
Improve scanning performance by setting property 0301 with a value from Windows driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
This patch adds symbol rate setting to the driver. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Video4Linux2 driver for AirSpy SDR device. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Print notice on driver load: "SDR API is still slightly experimental and functionality changes may follow". It is just remind possible used SDR API is very new and surprises may occur. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Move it out of staging into media like all the other SDR drivers too. There is no good reasons to keep these SDR drivers in staging. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 21 Jul, 2014 8 commits
-
-
Antti Palosaari authored
v4l2-compliance is now happy with frequency ranges where both lower and upper limit is same. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
It is moved out of staging to media. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
SDR API is very new and surprises may occur. Due to that print notice to remind possible users. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Move emulated format behind module parameter as those are not supported. Format conversions will be on library eventually. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Move rtl2832_sdr driver module from staging to media. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Mirics MSi001 and MSi2500 drivers uses SPI bus. Due to that we need auto-select it too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
Add software defined radio device support for media Kconfig. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
The driver moved out of staging. Update MAINTAINERS accordingly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-