- 15 Jun, 2017 3 commits
-
-
Phil Reid authored
i2c_smbus commands handle the correct byte order for smbus transactions internally. This will currently result in incorrect operation on big endian systems. Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Phil Reid authored
i2c_smbus commands handle the correct byte order for smbus transactions internally. This will currently result in incorrect operation on big endian systems. Signed-off-by:
-
Tony Lindgren authored
Otherwise cpcap-battery won't probe properly with the power-supplies property configured but will fail with "Not all required supplies found, defer probe". Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
- 14 Jun, 2017 6 commits
-
-
H. Nikolaus Schaller authored
This is in prepraration for EPROBE_DEFER handling because it is quite likely that geting the (madc) iio channel is deferred more often than later steps. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
H. Nikolaus Schaller authored
Suggested-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Arvind Yadav authored
File size before: text data bss dec hex filename 4240 200 80 4520 11a8 drivers/power/supply/power_supply_core.o File size After adding 'const': text data bss dec hex filename 4296 136 80 4512 11a0 drivers/power/supply/power_supply_core.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Tony Lindgren authored
The binding for cpcap-battery is missing the standard power-supplies property as noted by Sebastian Reichel <sebastian.reichel@collabora.co.uk>. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Sebastian Reichel authored
This moves max8903-charger.txt to proper location for power-supply bindings. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sebastian Reichel authored
This moves maxim,max14656.txt to proper location for power-supply bindings. Acked-by:
-
- 11 Jun, 2017 1 commit
-
-
Andy Shevchenko authored
Use sysfs_match_string() helper instead of open coded variant. Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- 08 Jun, 2017 22 commits
-
-
Sebastian Reichel authored
-
Bjorn Andersson authored
Move the reboot-mode.h include file into include/linux to allow drivers outside drivers/power/reset to implement reboot-mode. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Quentin Schulz authored
This adds the ability to set the maximum constant charge current, supported by the battery, delivered by this battery power supply to the battery. The maximum constant charge current set in DT will also set the default constant charge current supplied by this supply. The actual user can modify the constant charge current within the range of 0 to maximum constant charge current via sysfs. The user can also modify the maximum constant charge current to widen the range of possible constant charge current. While this seems quite risky, a message is printed on the console to warn the user this might damage the battery. The reason for letting the user change the maximum constant charge current is for letting users change the battery and thus, let them adjust the maximum constant charge current according to what the battery can support. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
-
Quentin Schulz authored
This adds support in X-Powers AXP20X and AXP22X battery driver for a fixed battery in DT. It will take the minimum supported voltage by the battery as defined in the battery DT node and set the V_OFF register to this value, telling the system to shut down if the supplied power is below this value. Signed-off-by:
-
Liam Breck authored
Previously there was no way to configure these chips in the event that the defaults didn't match the battery in question. For chips with RAM data memory (and also those with flash/NVM data memory if CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is defined and the user has not set module param dt_monitored_battery_updates_nvm=0) we now call power_supply_get_battery_info(), check its values, and write battery properties to chip data memory if there is a dm_regs table for the chip. Signed-off-by:
Matt Ranostay <matt@ranostay.consulting> Signed-off-by:
Liam Breck <kernel@networkimprov.net> Signed-off-by:
-
Liam Breck authored
Add these to enable read/write of chip data memory RAM/NVM/flash: bq27xxx_battery_seal() bq27xxx_battery_unseal() bq27xxx_battery_set_cfgupdate() bq27xxx_battery_soft_reset() bq27xxx_battery_read_dm_block() bq27xxx_battery_write_dm_block() bq27xxx_battery_checksum_dm_block() Signed-off-by:
-
Matt Ranostay authored
Declare bus.write/read_bulk/write_bulk(). Add I2C write/read_bulk/write_bulk() to implement the above. Add bq27xxx_write/read_block/write_block() helpers to call the above. Signed-off-by:
"Andrew F. Davis" <afd@ti.com> Signed-off-by:
-
Liam Breck authored
Document monitored-battery = <&battery_node> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Liam Breck authored
Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT Signed-off-by:
-
Liam Breck authored
power_supply_get_battery_info() reads battery data from devicetree. struct power_supply_battery_info provides battery data to drivers. Its fields correspond to elements in enum power_supply_property. Drivers may surface battery data in sysfs via corresponding POWER_SUPPLY_PROP_* fields. Signed-off-by:
-
Liam Breck authored
Documentation of static battery characteristics that can be defined for batteries that do not embed this data, which are required by fuel-gauge and charger chips for proper handling of the battery. The following properties are defined: voltage-min-design-microvolt charge-full-design-microamp-hours energy-full-design-microwatt-hours precharge-current-microamp charge-term-current-microamp constant-charge-current-max-microamp constant-charge-voltage-max-microamp Property names are derived from corresponding elements in enum power_supply_property from include/linux/power_supply.h https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Matt Ranostay authored
Add entries for microwatt-hours and microamp-hours. Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Tony Lindgren authored
On the CPCAP PMIC we can use the ADCs for monitoring the battery, and there is also a coulomb counter. So let's add basic support for the battery driver. I did not add any capacity prediction as that should probably be done in the user space. Or at least user space should tell the kernel some battery statistics and then the kernel driver could display the capacity based on that. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
-
Tony Lindgren authored
Add binding for cpcap pmic battery. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Florian Fainelli authored
On Broadcom MIPS STB platforms, BMIPS_GENERIC is the Kconfig symbol that is used, make this reboot driver default to that value to make sure we can reboot a system properly. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Since commit 37eb56dc ("arm64: Add Broadcom Set Top Box Kconfig entry point") we have ARCH_BRCMSTB also visible on ARM64 platform, yet this reboot driver was not selectable, so fix that. Signed-off-by:
-
Alexandre Belloni authored
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Alexandre Belloni authored
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6. Reported-by:
-
H. Nikolaus Schaller authored
Since we now support the standard 'input_current_limit' property by commit 3fb319c2 ("power: supply: twl4030-charger: add writable INPUT_CURRENT_LIMIT property") we can now remove the nonstandard 'max_current' sysfs attribute. See Documentation/power/power_supply_class.txt line 125 Both are functionally equivalent. From ABI point of view it is just a rename of the property. This also removes the entry in Documentation/ABI/testing/sysfs-class-power-twl4030 Signed-off-by:
-
Dan Carpenter authored
There are several cut and past bugs here. ltc3651_charger->charger is NULL at this point, so we return success instead of the intended error codes. Fixes: c94d4ed0 ("power: supply: Add ltc3651-charger driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [Wei Yongjun found the same issue independently] Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
-
David Lechner authored
This fixes the TODO to parse strings and convert them to enum values when writing to a power_supply class property sysfs attribute. There is at least one driver that has a writable enum property that previously could only be written as an integer, so a fallback to writing enums as integers instead of strings is provided so we don't break existing userspace programs. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Benson Leung authored
Apple currently supports three very common USB chargers: https://www.apple.com/power-adapters/ These chargers implement a proprietary Apple method for advertising 1A, 2.1A, and 2.4A at 5V called "Brick ID". In addition, 3rd parties implement the same charging method in many charging accessories that work with iOS devices. Devices that have charger detection chips such as the Pericom PI3USB9281, eg. Google Chromebook Pixel 2015, are capable of detecting these chargers, so let's add a type to facilicate passing that info up to userspace. This adds a separate power supply type for Apple's proprietary "Brick ID" charging method. Signed-off-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
- 15 May, 2017 4 commits
-
-
Hans de Goede authored
On devicetree using platforms the devicetree can provide info on which power-supplies supply another power-supply through phandles. This commit adds support for providing this info on non devicetree platforms through the platform code setting a supplied-from device-property on the power-supplies parent device. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Julia Lawall authored
Drop static on a local variable, when the variable is either first initialized or never used, on every possible execution path through the function. The static has no benefit, and dropping it reduces the code size. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> The change in code size is indicates by the following output from the size command. before: text data bss dec hex filename 2865 252 8 3125 c35 drivers/power/supply/axp20x_usb_power.o after: text data bss dec hex filename 2822 252 0 3074 c02 drivers/power/supply/axp20x_usb_power.o Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Mike Looijmans authored
The LTC3651 reports its status via GPIO lines. This driver translates the GPIO levels to battery charger status information via sysfs. It relies on devicetree to supply the IO configuration. Signed-off-by:
-
Mike Looijmans authored
This adds the devicetree bindings documentation for the LTC3651 battery charger. Signed-off-by:
-
- 14 May, 2017 2 commits
-
-
Tony Lindgren authored
With the ADC driver working, we can now fix the voltage table based on the values read from the ADC. Note that unlike the ICHRG registers, the VCHRG register bits don't match the MC13783UG.pdf. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Tony Lindgren authored
Turns out a similar battery charger hardware is documented for NXP MC13783 PMIC in "MC13783 Power Management and Audio Circuit Users's Guide" named MC13783UG.pdf. Looks like the CPCAP charge current table matches that, so let's start using the nominal values from it. While at it, let's also add comments to some of the mystery CPCAP charger registers based on the MC13783UG.pdf documentation. Note that this patch does not contain any functional changes, the register values being used stay the same. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
- 13 May, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
