- 13 Aug, 2012 9 commits
-
-
Cody P Schafer authored
If we call elf_section_by_name() with a truncated elf image (ie: the file header indicates that the section headers are placed past the end of the file), elf_strptr() causes a segfault within libelf. Avoid this by checking that we can access the section string table properly. Should really be fixed in libelf/elfutils. Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Hellsley <matthltc@us.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1344637382-22789-10-git-send-email-cody@linux.vnet.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Cody P Schafer authored
dso__load_vmlinux() uses the filename passed to it to directly set the dso long_name, which resulted in a use after free due to dso__load_vmlinux_path() treating 0 symbols as a load failure and subsequently freeing the contents of dso->long_name. Change dso__load_vmlinux() so that finding 0 symbols does not cause it to consider itself loaded, and do not set long_name in such a case. Signed-off-by:
-
Cody P Schafer authored
The only site that jumps to out_fixup has (kallsyms_filename == NULL). And all paths that reach 'if (err > 0)' without 'goto out_fixup' have kallsyms_filename != NULL. So skip over both the check & dso__set_long_name(), and remove the check. Signed-off-by:
-
Cody P Schafer authored
kallsyms__parse() takes a callback that is called on every discovered symbol. As /proc/kallsyms does not supply symbol sizes, the callback was simply called with end=start, faking the symbol size to 1. All of the callbacks (there are 2) used in calls to kallsyms__parse() are _only_ used as callbacks for kallsyms__parse(). Given that kallsyms__parse() lacks real information about what end/length should be, don't make up a length in kallsyms__parse(). Instead have the callbacks handle guessing the length. Also relocate a comment regarding symbol creation to the callback which does symbol creation (kallsyms__parse() is not in general used to create symbols). Signed-off-by:
-
Cody P Schafer authored
In kallsyms_parse() when calling process_symbol() (a callback argument to kallsyms_parse()), we pass start as both start & end (ie: start=start, end=start). In map__process_kallsym_symbol(), the length is calculated as 'end - start + 1', making the length 1, not 0. Essentially, start & end define an inclusive range. Signed-off-by:
-
Cody P Schafer authored
dso__set_long_name() is already called by dso__load_vmlinux(), avoid calling it a second time unnecessarily. Signed-off-by:
-
Cody P Schafer authored
If .dynsym exists but .dynstr is empty (NO_BITS or size==0), a segfault occurs. Avoid this by checking that .dynstr is not empty. Signed-off-by:
-
Cody P Schafer authored
map__objdump_2ip was introduced in: ee11b90b perf top: Fix annotate for userspace And it's last user removed in: 36532461 perf top: Ditch private annotation code, share perf annotate's Remove it. Signed-off-by:
-
Cody P Schafer authored
Prelink only adjusts the addresses of non-zero symbols. Do the same when we reverse the adjustments. Signed-off-by:
-
- 11 Aug, 2012 2 commits
-
-
Jiri Olsa authored
This patch enables perf to use the DWARF unwind code. It extends the perf record '-g' option with following arguments: 'fp' - provides framepointer based user stack backtrace 'dwarf[,size]' - provides DWARF (libunwind) based user stack backtrace. The size specifies the size of the user stack dump. If omitted it is 8192 by default. If libunwind is found during the perf build, then the 'dwarf' argument becomes available for record command. The 'fp' stays as default option in any case. Examples: (perf compiled with libunwind) perf record -g dwarf ls - provides dwarf unwind with 8192 as stack dump size perf record -g dwarf,4096 ls - provides dwarf unwind with 4096 as stack dump size perf record -g -- ls perf record -g fp ls - provides frame pointer unwind Signed-off-by:Jiri Olsa <jolsa@redhat.com> Original-patch-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.comSigned-off-by:
-
Jiri Olsa authored
This brings the support for DWARF cfi unwinding on perf post processing. Call frame informations are retrieved and then passed to libunwind that requests memory and register content from the applications. Adding unwind object to handle the user stack backtrace based on the user register values and user stack dump. The unwind object access the libunwind via remote interface and provides to it all the necessary data to unwind the stack. The unwind interface provides following function: unwind__get_entries And callback (specified in above function) to retrieve the backtrace entries: typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry, void *arg); Signed-off-by:
-
- 10 Aug, 2012 10 commits
-
-
Jiri Olsa authored
Adding following info to be parsed out of the event sample: - user register set - user stack dump Both are global and specific to all events within the session. This info will be used in the unwind patches coming in shortly. Adding simple output printout (report -D) for both register and stack dumps. Signed-off-by:
-
Jiri Olsa authored
Adding libunwind to be linked with perf if available. It's required for the to get dwarf cfi unwinding support. Also building perf with the dwarf call frame informations by default, so that we can unwind callchains in perf itself. Adding LIBUNWIND_DIR Makefile variable allowing user to specify the directory with libunwind to be linked. This is used for debug purposes. Signed-off-by:
-
Jiri Olsa authored
Adding header files to access unified API for arch registers. util/perf_regs.h - global perf_reg declarations arch/x86/include/perf_regs.h - x86 arch specific Adding perf_reg_name function to obtain register name based on the reg ID value, and PERF_REGS_MASK macro with mask definition of all current arch registers (will be used in unwind patches). Signed-off-by:
-
Jiri Olsa authored
Updating attr_file_abi_sizes array with PERF_ATTR_SIZE_VER2 version, so we have the swap check complete. Signed-off-by:
-
Frederic Weisbecker authored
Introducing following bits to the the perf_event_attr struct: - exclude_callchain_kernel to filter out kernel callchain from the sample dump - exclude_callchain_user to filter out user callchain from the sample dump We need to be able to disable standard user callchain dump when we use the dwarf cfi callchain mode, because frame pointer based user callchains are useless in this mode. Implementing also exclude_callchain_kernel to have complete set of options. Signed-off-by: -
Jiri Olsa authored
Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump of the user level stack on sample. The size of the dump is specified by sample_stack_user value. Being able to dump parts of the user stack, starting from the stack pointer, will be useful to make a post mortem dwarf CFI based stack unwinding. Added HAVE_PERF_USER_STACK_DUMP config option to determine if the architecture provides user stack dump on perf event samples. This needs access to the user stack pointer which is not unified across architectures. Enabling this for x86 architecture. Signed-off-by:
-
Jiri Olsa authored
Introducing perf_output_skip function to be able to skip data within the perf ring buffer. When writing data into perf ring buffer we first reserve needed place in ring buffer and then copy the actual data. There's a possibility we won't be able to fill all the reserved size with data, so we need a way to skip the remaining bytes. This is going to be useful when storing the user stack dump, where we might end up with less data than we originally requested. Signed-off-by:
-
Frederic Weisbecker authored
Adding a generic way to use __output_copy function with specific copy function via DEFINE_PERF_OUTPUT_COPY macro. Using this to add new __output_copy_user function, that provides output copy from user pointers. For x86 the copy_from_user_nmi function is used and __copy_from_user_inatomic for the rest of the architectures. This new function will be used in user stack dump on sample, coming in next patches. Signed-off-by:
-
Jiri Olsa authored
Introducing PERF_SAMPLE_REGS_USER sample type bit to trigger the dump of user level registers on sample. Registers we want to dump are specified by sample_regs_user bitmask. Only user level registers are dumped at the moment. Meaning the register values of the user space context as it was before the user entered the kernel for whatever reason (syscall, irq, exception, or a PMI happening in userspace). The layout of the sample_regs_user bitmap is described in asm/perf_regs.h for archs that support register dump. This is going to be useful to bring Dwarf CFI based stack unwinding on top of samples. Original-patch-by:
Stephane Eranian <eranian@google.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1344345647-11536-3-git-send-email-jolsa@redhat.comSigned-off-by:
-
Jiri Olsa authored
This brings a new API to help the selective dump of registers on event sampling, and its implementation for x86 arch. Added HAVE_PERF_REGS config option to determine if the architecture provides perf registers ABI. The information about desired registers will be passed in u64 mask. It's up to the architecture to map the registers into the mask bits. For the x86 arch implementation, both 32 and 64 bit registers bits are defined within single enum to ensure 64 bit system can provide register dump for compat task if needed in the future. Original-patch-by:
-
- 09 Aug, 2012 9 commits
-
-
Namhyung Kim authored
Implement a minimal elf parser for getting build-id. It assumes that required elf.h header is provided by libc header on the system and the parser only looks for PT_NOTE program header to check build-id. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1344228082-15569-5-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
Now we have isolated all ELF-specific stuff, it's possible to build without libelf. The output binary can do most of jobs but lacks (user level) symbol information - kernel symbols are still accessable thanks to the kallsyms. To build perf without libelf (elfutils), give NO_LIBELF=1 to make. For now, only 'perf probe' command is removed since it depends on libelf/libdw heavily. Signed-off-by:
-
Namhyung Kim authored
Factor out the dependency of ELF handling into separate symbol-elf.c file. It is a preparation of building a minimalistic version perf tools which doesn't depend on the elfutils. Signed-off-by:
-
Namhyung Kim authored
The symbol__elf_init() is for initializing internal libelf data structure and getting rid of its dependency outside of ELF/symboling handling code. Signed-off-by:
-
Namhyung Kim authored
Fix missing /etc/bash_completion.d directory creation, otherwise the installation fails miserably on systems that don't have bash completion installed yet or on specific target: $ make DESTDIR=/tmp/junk-perf O=/tmp/pbuild -C tools/perf/ install ... install -m 755 bash_completion /tmp/junk-perf/etc/bash_completion.d/perf install: cannot create regular file `/tmp/junk-perf/etc/bash_completion.d/perf': No such file or directory make: *** [install] Error 1 make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf' Also use sysconfdir variable instead of the hardcoded /etc to handle overriden conf directory. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1344522713-27951-4-git-send-email-fweisbec@gmail.comSigned-off-by:
-
Frederic Weisbecker authored
Add basic bash completion for the -e option in record, top and stat subcommands. Only hardware, software and tracepoint events are supported. Breakpoints, raw events and events grouping completion need more thinking. Signed-off-by:
-
Frederic Weisbecker authored
This implements bash completion for perf subcommands such as record, report, script, probe, etc... Signed-off-by:
-
David Ahern authored
If CONFIG options required for perf-lock are not enabled then the corresponding tracepoints will not be enabled. Currently, the message to the user is: $ perf lock record -a -- sleep 1 invalid or unsupported event: 'lock:lock_acquire' Run 'perf list' for a list of valid events Improve the message with a suggestion on which CONFIG options are needed: $ perf lock record -a -- sleep 1 tracepoint lock:lock_acquire is not enabled. Are CONFIG_LOCKDEP and CONFIG_LOCK_STAT enabled? Suggested-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Feng Tang authored
Correct the checking for handler returned by PyDict_GetItemString(), also fix some spelling error and remove some data code in event_analyzing_sample.py, as suggested by Namhyung Kim. v2: restore back the wrongly removed trace_unhandled() func Signed-off-by:
Feng Tang <feng.tang@intel.com> Acked-by:
-
- 08 Aug, 2012 10 commits
-
-
Feng Tang authored
Currently only trace point events are supported in perf/python script, the first 3 patches of this serie add the support for all types of events. This script is just a simple sample to show how to gather the basic information of the events and analyze them. This script will create one object for each event sample and insert them into a table in a database, then leverage the simple SQL commands to sort/group them. User can modify or write their brand new functions according to their specific requirment. Here is the sample of how to use the script: $ perf record -a tree $ perf script -s process_event.py There is 100 records in gen_events table Statistics about the general events grouped by thread/symbol/dso: comm number histgram ========================================== swapper 56 ###### tree 20 ##### perf 10 #### sshd 8 #### kworker/7:2 4 ### ksoftirqd/7 1 # plugin-containe 1 # symbol number histgram ========================================================== native_write_msr_safe 40 ###### __lock_acquire 8 #### ftrace_graph_caller 4 ### prepare_ftrace_return 4 ### intel_idle 3 ## native_sched_clock 3 ## Unknown_symbol 2 ## do_softirq 2 ## lock_release 2 ## lock_release_holdtime 2 ## trace_graph_entry 2 ## _IO_putc 1 # __d_lookup_rcu 1 # __do_fault 1 # __schedule 1 # _raw_spin_lock 1 # delay_tsc 1 # generic_exec_single 1 # generic_fillattr 1 # dso number histgram ================================================================== [kernel.kallsyms] 95 ####### /lib/libc-2.12.1.so 5 ### Signed-off-by: -
Feng Tang authored
This library defines several class types for perf events which could help to better analyze the event samples. Currently there are just a few classes, PerfEvent is the base class for all perf events, PebsEvent is a HW base Intel x86 PEBS event, and user could add more SW/HW event classes based on requriements. Signed-off-by:
-
Feng Tang authored
Also as suggested by Arnaldo, pack all these parameters to a dictionary, which is more expandable for adding new parameters while keeping the compatibility for old scripts. Signed-off-by:
-
Feng Tang authored
perf script: Replace "struct thread" with "struct addr_location" as a parameter for "process_event()" Both perl and python script start processing events other than trace points, and it's useful to pass the resolved symbol and the dso info to the event handler in script for better analysis and statistics. Struct thread is already a member of struct addr_location, using addr_location will keep the thread info, while providing additional symbol and dso info if exist, so that the script itself doesn't need to bother to do the symbol resolving and dso searching work. Tested-by:
-
Feng Tang authored
This patch just follows Robert Richter's idea and the commit 37a058ea "perf script: Add generic perl handler to process events" to similarly add a python handler for general events other than tracepoints. For non-tracepoint events, this patch will try to find a function named "process_event" in the python script, and pass the event attribute, perf_sample, raw_data in format of raw string. And the python script can use "struct" module's unpack function to disasemble the needed info and process. Signed-off-by:
-
Robert Richter authored
Updating man perf-list. Signed-off-by:
Robert Richter <robert.richter@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1344361396-7237-7-git-send-email-robert.richter@amd.comSigned-off-by:
-
Robert Richter authored
It was missing that only certain bit fields are passed to the config value which confused users. Updating it. Signed-off-by:
-
Robert Richter authored
Fixing the integer cast reported by the following warning: tools/lib/traceevent/event-parse.c:3488:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by:
-
Robert Richter authored
perf record fails on 32 bit with: invalid or unsupported event: 'r40000F7E0' Fixing this by parsing 64 bit num values. Signed-off-by:
-
Robert Richter authored
With the OUTPUT variable set the libtraceevent.a file is wrongly built in the source directory: + make -d OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/ ... Considering target file `../lib/traceevent//libtraceevent.a'. File `../lib/traceevent//libtraceevent.a' does not exist. Finished prerequisites of target file `../lib/traceevent//libtraceevent.a'. Must remake target `../lib/traceevent//libtraceevent.a'. Invoking recipe from Makefile:837 to update target `../lib/traceevent//libtraceevent.a'. Putting child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365 on the chain. Live child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365 SUBDIR ../lib/traceevent/ $ git clean -nxd Would remove tools/lib/traceevent/.event-parse.d Would remove tools/lib/traceevent/.parse-filter.d Would remove tools/lib/traceevent/.parse-utils.d Would remove tools/lib/traceevent/.trace-seq.d Would remove tools/lib/traceevent/event-parse.o Would remove tools/lib/traceevent/libtraceevent.a Would remove tools/lib/traceevent/parse-filter.o Would remove tools/lib/traceevent/parse-utils.o Would remove tools/lib/traceevent/trace-seq.o This patch fixes this. Note: Though this should already work with O=$outputdir we better use the OUTPUT variable directly. Signed-off-by:
-
