Moved counter mode handling code in front as it doesn't depend on the
rest of the code to be executed, it can just do its thing and exit.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of having a fixed value (of 300) all over the place, the value for
for .cra_priority is now made into a define (SAFEXCEL_CRA_PRIORITY).
This makes it easier to play with, e.g. during development.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch probes the supported algorithms from the hardware and only
registers the ones that the hardware actually supports. This is necessary
because this is a generic driver supposed to run on a wide variety of
engines, which may or may not implement certain algorithms.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the AES-XTS skcipher algorithm.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ctx->alg and ctx->mode were set from safexcel_send_req through the
various safexcel_encrypt and _decrypt routines, but this makes little
sense as these are static per ciphersuite. So moved to _init instead,
in preparation of adding more ciphersuites.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Record crypto key to context during setkey and set the key to
transform state buffer in encrypt/decrypt process.
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Tested-by: John Crispin <john@phrozen.og>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds support to OFB/CFB mode.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The driver was treating -EBUSY as indication of queueing to backlog
without checking that backlog is enabled for the request.

Fix it by checking request flags.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a pre-computed text length to avoid uninitialized value in the check.

Fixes: e4727066 ("crypto: mediatek - Add empty messages check in GCM mode")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move mtk_aes_find_dev() to right functions as nobody uses the
'cryp' under current flows.

We can also avoid duplicate checks here and there in this way.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Vic Wu <vic.wu@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When CRYPTO_DEV_HISI_SEC=y, below compilation error is found after
'commit 894b68d8 ("crypto: hisilicon/des - switch to new verification routines")':

drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_cbc':
sec_algs.c:(.text+0x11f0): undefined reference to `des_expand_key'
drivers/crypto/hisilicon/sec/sec_algs.o: In function `sec_alg_skcipher_setkey_des_ecb':
sec_algs.c:(.text+0x1390): undefined reference to `des_expand_key'
make: *** [vmlinux] Error 1

This because DES library has been moved to lib/crypto in this commit
'04007b0e ("crypto: des - split off DES library from generic DES cipher driver")'.
Fix this by selecting CRYPTO_LIB_DES in CRYPTO_DEV_HISI_SEC.

Fixes: 04007b0e ("crypto: des - split off DES library from generic DES cipher driver")
Fixes: 894b68d8 ("crypto: hisilicon/des - switch to new verification routines")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/crypto/sha256.c / lib/crypto/libsha256.o may end up being a module,
so it needs a MODULE_LICENSE() line, add this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.

Since the ccp driver already has a fallback skcipher standby for
dealing with input sizes other than [16, 512, 1024, 2048, 4096],
just drop the check against the block size.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/nx/nx.h:12:19: warning:
 nx_driver_string defined but not used [-Wunused-const-variable=]
drivers/crypto/nx/nx.h:13:19: warning:
 nx_driver_version defined but not used [-Wunused-const-variable=]

They are never used, so just remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/atmel-i2c.h:68:3: warning:
 error_list defined but not used [-Wunused-const-variable=]

error_list is only used in atmel-i2c.c,
so just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto/aegis.h:27:32: warning:
 crypto_aegis_const defined but not used [-Wunused-const-variable=]

crypto_aegis_const is only used in aegis128-core.c,
just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add clock entry needed to support i.MX8MQ.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Per feedback from NXP tech support the way to use register based
service interface on i.MX8MQ is to follow the same set of steps
outlined for the case when virtualization is enabled, regardless if it
is. Current version of SRM for i.MX8MQ speaks of DECO DID_MS and DECO
DID_LS registers, but apparently those are not implemented, so the
case when SCFGR[VIRT_EN]=0 should be handled the same as the case when
SCFGR[VIRT_EN]=1
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

i.MX8 mScale SoC still use 32-bit addresses in its CAAM implmentation,
so we can't rely on sizeof(dma_addr_t) to detemine CAAM pointer
size. Convert the code to query CTPR and MCFGR for that during driver
probing.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using dma_addr_t for elements of JobR input ring is not appropriate on
all 64-bit SoCs, some of which, like i.MX8MQ, use only 32-bit wide
pointers there. Convert all of the code to use explicit helper
function that can be later extended to support i.MX8MQ. No functional
change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using struct jr_outentry to specify the layout of JobR output ring is
not appropriate for all 64-bit SoC, since some of them, like i.MX8MQ,
use 32-bit pointers there which doesn't match 64-bit
dma_addr_t. Convert existing code to use explicit helper functions to
access any of the JobR output ring elements, so that the support for
i.MX8MQ can be added later. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of selecting the implementation of
cpu_to_caam_dma()/caam_dma_to_cpu() at build time using the
preprocessor, convert the code to do that at run-time using IS_ENABLED
macro. This is needed to add support for i.MX8MQ. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to be able to configure CAAM pointer size at run-time, which
needed to support i.MX8MQ, which is 64-bit SoC with 32-bit pointer
size, convert CAAM_PTR_SZ to refer to a global variable of the same
name ("caam_ptr_sz") and adjust the rest of the code accordingly. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Both qi.h and cammalg_qi2.h seem to define identical versions of
MAX_SDLEN. Move it to desc_constr.h to avoid duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since 32-bit of both wr_reg64 and rd_reg64 now use 64-bit IO helpers,
these functions should no longer be necessary. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Following the same transformation logic as outlined in previous commit
converting wr_reg64, convert rd_reg64 to use helpers from
<linux/io-64-nonatomic-hi-lo.h> first. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to be able to unify 64 and 32 bit implementations of
wr_reg64, let's convert it to use helpers from
<linux/io-64-nonatomic-hi-lo.h> first. Here are the steps of the
transformation:

1. Inline wr_reg32 helpers:

	if (!caam_imx && caam_little_end) {
		if (caam_little_end) {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		} else {
			iowrite32be(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32be(data, (u32 __iomem *)(reg));
		}
	} else {
		if (caam_little_end) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite32be(data >> 32, (u32 __iomem *)(reg));
			iowrite32be(data, (u32 __iomem *)(reg) + 1);
		}
	}

2. Transfrom the conditionals such that the check for
'caam_little_end' is at the top level:

	if (caam_little_end) {
		if (!caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		} else {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		}
	} else {
		iowrite32be(data >> 32, (u32 __iomem *)(reg));
		iowrite32be(data, (u32 __iomem *)(reg) + 1);
	}

3. Invert the check for !caam_imx:

	if (caam_little_end) {
		if (caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		}
	} else {
		iowrite32be(data >> 32, (u32 __iomem *)(reg));
		iowrite32be(data, (u32 __iomem *)(reg) + 1);
	}

4. Make use of iowrite64* helpers from <linux/io-64-nonatomic-hi-lo.h>

	if (caam_little_end) {
		if (caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite64(data, reg);
		}
	} else {
		iowrite64be(data, reg);
	}

No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to avoid any risk of JR IRQ request being handled while some
of the resources used for that are not yet allocated move the code
requesting said IRQ to the endo of caam_jr_init().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devres to allocate all of the resources in caam_jr_init() (DMA
coherent and regular memory, IRQs) drop calls to corresponding
deallocation routines. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify clock initialization code by converting it to use clk-bulk,
devres and soc_device_match() match table. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Exactly the same code to figure out DMA mask is repeated twice in the
driver code. To avoid repetition, move that logic into a standalone
subroutine in intern.h. While at it re-shuffle the code to make it
more readable with early returns.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use print_hex_dump_debug function to print debug messages, instead of
print_hex_dump inside #ifdef DEBUG.

Fixes: 6e005503 ("crypto: caam - print debug messages at debug level")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Until now, the inside-secure driver required a set of firmware images
supplied by the silicon vendor, typically under NDA, to be present in
/lib/firmware/inside-secure in order to be able to function.
This patch removes the dependence on this official vendor firmware by
falling back to generic "mini" FW - developed specifically for this
driver - that can be provided under GPL 2.0 through linux-firmwares.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds support for a PCIE development board with FPGA from Xilinx,
to facilitate pre-silicon driver development by both Inside Secure and its
IP customers. Since Inside Secure neither produces nor has access to actual
silicon, this is required functionality to allow us to contribute.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This removes some code determine which engine has which algorithms which
was effectively redundant (may have been forward-looking?) due to always
enabling all algorithms for all currently supported engines.
A future patch will use a different, more scalable approach to achieve
this. This is removed now because otherwise the next patch will add new
hardware which would otherwise have to be added to all algorithms, so
now is a convenient time to just get rid of this.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While being a generic EIP97/EIP197 driver, the driver was only selectable
for Marvell Armada hardware. This fix makes the driver selectable for any
Device Tree supporting kernel configuration, allowing it to be used for
other compatible hardware by just adding the correct device tree entry.

It also allows the driver to be selected for PCI(E) supporting kernel con-
figurations, to be able to use it with PCIE based FPGA development boards
for pre-silicon driver development by both Inside Secure and its IP custo-
mers.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Align the s5p ctr(aes) implementation with other implementations
of the same mode, by setting the block size to 1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The s5p skcipher driver returns -EINVAL for zero length inputs, which
deviates from the behavior of the generic ECB template, and causes fuzz
tests to fail. In cases where the input is not a multiple of the AES
block size (and the chaining mode is not CTR), it prints an error to
the kernel log, which is a thing we usually try to avoid in response
to situations that can be triggered by unprivileged users.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add an accelerated version of the 'essiv(cbc(aes),sha256)' skcipher,
which is used by fscrypt or dm-crypt on systems where CBC mode is
signficantly more performant than XTS mode (e.g., when using a h/w
accelerator which supports the former but not the latter) This avoids
a separate call into the AES cipher for every invocation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The plain CBC driver and the CTS one share some code that iterates over
a scatterwalk and invokes the CBC asm code to do the processing. The
upcoming ESSIV/CBC mode will clone that pattern for the third time, so
let's factor it out first.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>