- 14 Aug, 2019 9 commits
-
-
Sean Young authored
Sometimes the device sends IR data which is all space, no pulses whatsoever. Add the end of this the driver will put the rc device into idle mode when it already is in idle mode. The following will be logged: rc rc0: nonsensical timing event of duration 0 rc rc0: two consecutive events of type space Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sean Young authored
This code needs some explanation. Signed-off-by:
-
Wolfram Sang authored
Convert this driver to use the new i2c_new_dummy_device() call and bail out if the dummy device cannot be registered to make failure more visible to the user. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Masahiro Yamada authored
Add a header include guard just in case. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Colin Ian King authored
The variables mclk, div and ad_div are being assigned with a values that are never read and are being updated later with a new values. The assignments are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Luke Nowakowski-Krijger authored
Fix DVBFE_ALGO_RECOVERY and DVBFE_ALGO_SEARCH_ERROR use BIT macro which fixes undefined behavior error by certain compilers. Also changed all other bit shifted definitions to use macro for better readability. Signed-off-by:
Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu> Signed-off-by:
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by:
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by:
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by:
-
- 13 Aug, 2019 31 commits
-
-
Denis Efremov authored
Cleanup MAINTAINERS from zoran record since the driver was removed. Fixes: 8dce4b26 ("media: zoran: remove deprecated driver") Signed-off-by:
Denis Efremov <efremov@linux.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Denis Efremov authored
Fix typo (s/platform//) in the directory path. Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Fixes: a29add8c ("media: rockchip/vpu: rename from rockchip to hantro") Signed-off-by:
-
Fuqian Huang authored
In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Fuqian Huang authored
pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). Convert the ADV748x to utilise this simplified i2c driver registration. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in four places. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in two places. Issue found with Coccinelle. Signed-off-by:
Houlong Wei <houlong.wei@mediatek.com> Signed-off-by:
-
Geert Uytterhoeven authored
When support for the IPMMU is not enabled, the FDP driver may be probe-deferred multiple times, causing several messages to be printed like: rcar_fdp1 fe940000.fdp1: FCP not found (-517) rcar_fdp1 fe944000.fdp1: FCP not found (-517) Fix this by reducing the message level to debug level, as is done in the VSP1 driver. Fixes: 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Fuqian Huang authored
Replace kmalloc followed by a memset with kzalloc. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
Move away from the to-be-removed i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an ERRPTR which we use in error handling by printing the error code. To keep the rest of the driver logic as is, internally a NULL ptr is still kept. Signed-off-by:
-
Wolfram Sang authored
i2c_new_dummy() can fail returning a NULL pointer. This is not checked and the returned pointer is blindly used. Convert to devm_i2c_new_dummy_client() which returns an ERR_PTR and also add a validity check. Using devm_* here also fixes a leak because the dummy client was not released in the probe error path. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Matthias Brugger authored
of_get_next_child() increments the reference count of the returning device_node. Decrement it in the check if we are using the old or the new DTB. Fixes: ba1f1f70 ("[media] media: mtk-mdp: Fix mdp device tree") Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
-
Jernej Skrabec authored
Scale and rotation are currently not implemented, so it makes no sense to set chroma size for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
