- 31 Jul, 2012 40 commits
-
-
Namjae Jeon authored
Use -ENOMEM return value instead of -EINVAL when kzalloc() fails. Signed-off-by:
Namjae Jeon <linkinjeon@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vyacheslav Dubeyko authored
Add omitted comments for different structures in driver implementation. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Vyacheslav Dubeyko authored
Add omitted comments for structures in nilfs2_fs.h. Signed-off-by:
-
Ryusuke Konishi authored
An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command: chcp D ffff88013870f3d0 0 1325 1324 0x00000004 ... Call Trace: nilfs_transaction_begin+0x11c/0x1a0 [nilfs2] wake_up_bit+0x20/0x20 copy_from_user+0x18/0x30 [nilfs2] nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2] nilfs_ioctl+0x252/0x61a [nilfs2] do_page_fault+0x311/0x34c get_unmapped_area+0x132/0x14e do_vfs_ioctl+0x44b/0x490 __set_task_blocked+0x5a/0x61 vm_mmap_pgoff+0x76/0x87 __set_current_blocked+0x30/0x4a sys_ioctl+0x4b/0x6f system_call_fastpath+0x16/0x1b thaw D ffff88013870d890 0 1352 1351 0x00000004 ... Call Trace: rwsem_down_failed_common+0xdb/0x10f call_rwsem_down_write_failed+0x13/0x20 down_write+0x25/0x27 thaw_super+0x13/0x9e do_vfs_ioctl+0x1f5/0x490 vm_mmap_pgoff+0x76/0x87 sys_ioctl+0x4b/0x6f filp_close+0x64/0x6c system_call_fastpath+0x16/0x1b where the thaw ioctl deadlocked at thaw_super() when called while chcp was waiting at nilfs_transaction_begin() called from nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible. This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in read mode and then waits for unfreezing in nilfs_transaction_begin(), whereas thaw_super() locks sb->s_umount in write mode. The locking of sb->s_umount here was intended to make snapshot mounts and the downgrade of snapshots to checkpoints exclusive. This fixes the deadlock issue by replacing the sb->s_umount usage in nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot mounts. Signed-off-by:
-
Ryusuke Konishi authored
The checkpoint deletion ioctl (rmcp ioctl) has potential for breaking snapshot because it is not fully exclusive with checkpoint mode change ioctl (chcp ioctl). The rmcp ioctl first tests if the specified checkpoint is a snapshot or not within nilfs_cpfile_delete_checkpoint function, and then calls nilfs_cpfile_delete_checkpoints function to actually invalidate the checkpoint only if it's not a snapshot. However, the checkpoint can be changed into a snapshot by the chcp ioctl between these two operations. In that case, calling nilfs_cpfile_delete_checkpoints() wrongly invalidates the snapshot, which leads to snapshot list corruption and snapshot count mismatch. This fixes the issue by changing nilfs_cpfile_delete_checkpoints() so that it reconfirms the target checkpoints are snapshot or not. This second check is exclusive with the chcp operation since it is protected by an existing semaphore. Signed-off-by:
-
Fernando Luis Vazquez Cao authored
->delete_inode(), ->write_super_lockfs(), ->unlockfs() are gone so remove references to them in the NTFS code. Noticed while cleaning up the fsfreeze mess. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Vyacheslav Dubeyko authored
Add omitted comment for ns_mount_state field of the_nilfs structure. Signed-off-by:
-
Vladimir Serbinenko authored
On minix2 and minix3 usually max_size is 7fffffff and the check in question prohibits creation of last block spanning right before 7fffffff, due to downward rounding during the division. Fix it by using multiplication instead. [akpm@linux-foundation.org: fix up code layout, use local `sb'] Signed-off-by:
Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by:
-
Nick Bowler authored
Set the of_match_table for this driver so that devices can be described in the device tree. Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Nick Bowler authored
The owner member is supposed to be set to the module implementing the device driver, i.e., THIS_MODULE. This enables the appropriate module link in sysfs. Signed-off-by:
-
Devendra Naga authored
Freeing will trigger when driver unloads, so using devm_kfree() is not needed. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Uwe Kleine-König authored
This allows automatic driver loading for all supported device types. Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Andrew Morton authored
When the driver detects that the clock time is invalid, it attempts to write a sane time into the hardware. We curently assume that everything is OK if those writes succeeded. But it is better to re-read the time from the hardware to ensure that the new settings got there OK. Cc: Devendra Naga <devendra.aaru@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Andreas Dumberger <andreas.dumberger@tqs.de> Signed-off-by:
-
Devendra Naga authored
r9701_get_datetime() calls rtc_valid_tm() and returns the value returned by rtc_valid_tm(), which can be used in the `if', so calling rtc_valid_tm() a second time is not required. Signed-off-by:
-
Bengt Jonsson authored
AB8500 ED (Early Drop) is no longer supported by the kernel. Signed-off-by:
Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Ramesh Chandrasekaran authored
RTC: Fix to correct improper implementation of clock update irq (RTC_UIE) and enable UIE Emulation. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com> Signed-off-by:
-
Mattias Wallin authored
The pl031 interrupt is shared between the timer part and the clockwatch part of the same HW block on the ux500, so mark it IRQF_SHARED on this variant. This patch also adds the IRQF_NO_SUSPEND flag to the rtc irq on all variants as we don't want this pretty important IRQ to be disabled in suspend. Signed-off-by:
Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by:
Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by:
Jonas Aberg <jonas.aberg@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Linus Walleij authored
Instead of hard-checking for certain vendor codes, follow the pattern of other AMBA (PrimeCell) drivers and use variables in the vendor data. Get rid of the locally cached vendor and hardware revision since we already have the nice vendor data variable in the state. Signed-off-by:
-
Linus Walleij authored
Move the per-vendor operations for this RTC into a encapsulating struct so we can have more per-vendor variables than just the ops. Signed-off-by:
-
Linus Walleij authored
Allocate memory, region, remap and irq for device state using devm_* helpers to simplify memory accounting. Signed-off-by:
-
Linus Walleij authored
Make sure we prepare/unprepare the clock for the COH901331 RTC driver as is required by the clk API especially if you use common clock. Signed-off-by:
-
Alan Cox authored
Fix a case where users can try to allocate arbitarily large amounts of memory. 64K is overkill for a config request so apply an upper bound. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Kamil Dudka authored
drivers/message/i2o/i2o_proc.c: the pointer returned from chtostr() points to an array which is no longer valid ... when being used in the calling function. Although it may work, the behavior is undefined. Detected by cppcheck. Signed-off-by:
Kamil Dudka <kdudka@redhat.com> Signed-off-by:
-
Thiago Rafael Becker authored
Variables t4, t5, t6 and t7 are only used when CRC_LE_BITS != 32. Fix the following compilation warnings: lib/crc32.c: In function 'crc32_body': lib/crc32.c:77:55: warning: unused variable 't7' lib/crc32.c:77:41: warning: unused variable 't6' lib/crc32.c:77:27: warning: unused variable 't5' lib/crc32.c:77:13: warning: unused variable 't4' Signed-off-by:
Thiago Rafael Becker <trbecker@trbecker.org> Cc: "Darrick J. Wong" <djwong@us.ibm.com> Cc: Bob Pearson <rpearson@systemfabricworks.com> Signed-off-by:
-
Joe Perches authored
These types of macros should not be used for either a single statement nor should the macro end with a semi-colon. Add tests for these conditions. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Kernel style uses parenthesis around sizeof. Signed-off-by:
-
Joe Perches authored
usleep_range() shouldn't use the same args for min and max. Report it when it happens and when both args are decimal and min > max. Signed-off-by:
-
Joe Perches authored
Warn on non-standard signature styles. Signed-off-by:
-
Joe Perches authored
Parenthesis alignment doesn't correctly check an existing line after an inserted or modified line with an open parenthesis. Fix it. Signed-off-by:
-
Yasuaki Ishimatsu authored
There are two ways to create /sys/firmware/memmap/X sysfs: - firmware_map_add_early When the system starts, it is calledd from e820_reserve_resources() - firmware_map_add_hotplug When the memory is hot plugged, it is called from add_memory() But these functions are called without unifying value of end argument as below: - end argument of firmware_map_add_early() : start + size - 1 - end argument of firmware_map_add_hogplug() : start + size The patch unifies them to "start + size". Even if applying the patch, /sys/firmware/memmap/X/end file content does not change. [akpm@linux-foundation.org: clarify comments] Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Dave Hansen <dave@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Stephen Boyd authored
If there are two spinlocks embedded in a structure that kallsyms knows about and one of the spinlocks locks up we will print the name of the containing structure instead of the address of the lock. This is quite bad, so let's use %pS instead of %ps so we get an offset in addition to the symbol so we can determine which particular lock is having problems. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Catalin Marinas authored
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Akinobu Mita authored
Convert ext4_count_free() to use memweight() instead of table lookup based counting clear bits implementation. This change only affects the code segments enabled by EXT4FS_DEBUG. Note that this memweight() call can't be replaced with a single bitmap_weight() call, although the pointer to the memory area is aligned to long-word boundary. Because the size of the memory area may not be a multiple of BITS_PER_LONG, then it returns wrong value on big-endian architecture. This also includes the following change. - Remove unnecessary map == NULL check in ext4_count_free() which always takes non-null pointer as the memory area. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
-
Akinobu Mita authored
Convert ext3_count_free() to use memweight() instead of table lookup based counting clear bits implementation. This change only affects the code segments enabled by EXT3FS_DEBUG. Note that this memweight() call can't be replaced with a single bitmap_weight() call, although the pointer to the memory area is aligned to long-word boundary. Because the size of the memory area may not be a multiple of BITS_PER_LONG, then it returns wrong value on big-endian architecture. This also includes the following changes. - Remove unnecessary map == NULL check in ext3_count_free() which always takes non-null pointer as the memory area. - Fix printk format warning that only reveals with EXT3FS_DEBUG. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
-
Akinobu Mita authored
Convert ext2_count_free() to use memweight() instead of table lookup based counting clear bits implementation. This change only affects the code segments enabled by EXT2FS_DEBUG. Note that this memweight() call can't be replaced with a single bitmap_weight() call, although the pointer to the memory area is aligned to long-word boundary. Because the size of the memory area may not be a multiple of BITS_PER_LONG, then it returns wrong value on big-endian architecture. This also includes the following changes. - Remove unnecessary map == NULL check in ext2_count_free() which always takes non-null pointer as the memory area. - Fix printk format warning that only reveals with EXT2FS_DEBUG. Signed-off-by:
-
Akinobu Mita authored
Use memweight to count the total number of bits set in memory area. Signed-off-by:
-
Akinobu Mita authored
Use memweight() to count the total number of bits set in memory area. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Akinobu Mita authored
Use memweight() to count the total number of bits set in memory area. Signed-off-by:
-
