- 03 Oct, 2008 10 commits
-
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Though from a hardware perspective it would be sensible to use only a 32-bit unsigned int type Linux defines interrupt flags to be stored in an unsigned long and nothing else. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Linus Torvalds authored
Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would cause tons of warnings at bootup if PREEMPT was enabled because the initcalls currently run with the kernel lock, which increments the preempt count. At the same time, the warning was also insufficient, since it didn't check that interrupts were enabled. The proper debug function to use for something that can sleep and wants a warning if it's called in the wrong context is 'might_sleep()'. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Brandeburg authored
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
This patch adds a mutex to the e1000e driver that would help catch any collisions of two e1000e threads accessing hardware at the same time. description and patch updated by Jesse Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Brandeburg authored
the stats lock is left over from e1000, e1000e no longer has the adjust tbi stats function that required the addition of the stats lock to begin with. adding a mutex to acquire_swflag helped catch this one too. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Brandeburg authored
thanks to tglx, we're finding some interesting reentrancy issues. this patch removes the phy read from inside a spinlock, paving the way for removing the spinlock completely. The phy read was only feeding a statistic that wasn't used. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Brandeburg authored
e1000e was apparently calling two functions that attempted to reserve the SWFLAG bit for exclusive (to hardware and firmware) access to the PHY and NVM (aka eeprom). These accesses could possibly call msleep to wait for the resource which is not allowed from interrupt context. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Brandeburg authored
in the process of debugging things, noticed that the swflag is not reset by the driver after reset, and the swflag is probably not reset unless management firmware clears it after 100ms. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Oct, 2008 14 commits
-
-
Andy Whitcroft authored
When we initialise a compound page we initialise the page flags and head page pointer for all base pages spanned by that page. When we initialise a gigantic page (a page of order greater than or equal to MAX_ORDER) we have to initialise more than MAX_ORDER_NR_PAGES pages. Currently we assume that all elements of the mem_map in this page are contigious in memory. However this is only guarenteed out to MAX_ORDER_NR_PAGES pages, and with SPARSEMEM enabled they will not be contigious. This leads us to walk off the end of the first section and scribble on everything which follows, BAD. When we reach a MAX_ORDER_NR_PAGES boundary we much locate the next section of the mem_map. As gigantic pages can only be maximally aligned we know this will occur at exact multiple of MAX_ORDER_NR_PAGES pages from the start of the page. This is a bug fix for the gigantic page support in hugetlbfs. Credit to Mel Gorman for spotting the issue. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Piggin authored
The previous patch db203d53 ("mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU architectures because it was using the expanding truncate to signal ramfs to allocate a physically contiguous RAM backing the inode (otherwise it is unusable for "memory mapping" it to userspace). However do_truncate is what caused the lock ordering error, due to it taking i_mutex. In this case, we can actually just call ramfs directly to allocate memory for the mapping, rather than go via truncate. Acked-by: David Howells <dhowells@redhat.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Gerald Schaefer authored
__test_page_isolated_in_pageblock() in mm/page_isolation.c has a comment saying that the caller must hold zone->lock. But the only caller of that function, test_pages_isolated(), does not hold zone->lock and the lock is also not acquired anywhere before. This patch adds the missing zone->lock to test_pages_isolated(). We reproducibly run into BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during memory hotplug stress test, see trace below. This patch fixes that problem, it would be good if we could have it in 2.6.27. kernel BUG at /home/autobuild/BUILD/linux-2.6.26-20080909/mm/page_alloc.c:4561! illegal operation: 0001 [#1] PREEMPT SMP Modules linked in: dm_multipath sunrpc bonding qeth_l3 dm_mod qeth ccwgroup vmur CPU: 1 Not tainted 2.6.26-29.x.20080909-s390default #1 Process memory_loop_all (pid: 10025, task: 2f444028, ksp: 2b10dd28) Krnl PSW : 040c0000 801727ea (__offline_isolated_pages+0x18e/0x1c4) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 Krnl GPRS: 00000000 7e27fc00 00000000 7e27fc00 00000000 00000400 00014000 7e27fc01 00606f00 7e27fc00 00013fe0 2b10dd28 00000005 80172662 801727b2 2b10dd28 Krnl Code: 801727de: 5810900c l %r1,12(%r9) 801727e2: a7f4ffb3 brc 15,80172748 801727e6: a7f40001 brc 15,801727e8 >801727ea: a7f4ffbc brc 15,80172762 801727ee: a7f40001 brc 15,801727f0 801727f2: a7f4ffaf brc 15,80172750 801727f6: 0707 bcr 0,%r7 801727f8: 0017 unknown Call Trace: ([<0000000000172772>] __offline_isolated_pages+0x116/0x1c4) [<00000000001953a2>] offline_isolated_pages_cb+0x22/0x34 [<000000000013164c>] walk_memory_resource+0xcc/0x11c [<000000000019520e>] offline_pages+0x36a/0x498 [<00000000001004d6>] remove_memory+0x36/0x44 [<000000000028fb06>] memory_block_change_state+0x112/0x150 [<000000000028ffb8>] store_mem_state+0x90/0xe4 [<0000000000289c00>] sysdev_store+0x34/0x40 [<00000000001ee048>] sysfs_write_file+0xd0/0x178 [<000000000019b1a8>] vfs_write+0x74/0x118 [<000000000019b9ae>] sys_write+0x46/0x7c [<000000000011160e>] sysc_do_restart+0x12/0x16 [<0000000077f3e8ca>] 0x77f3e8ca Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
Found by static checker (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Pascal Terjan authored
Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nick Piggin authored
Fix inotify lock order reversal with mmap_sem due to holding locks over copy_to_user. Signed-off-by: Nick Piggin <npiggin@suse.de> Reported-by: "Daniel J Blueman" <daniel.blueman@gmail.com> Tested-by: "Daniel J Blueman" <daniel.blueman@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Winn authored
Commit 22af89aa ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: snd-powermac: HP detection for 1st iMac G3 SL ALSA: snd-powermac: mixers for PowerMac G4 AGP ASoC: Set correct name for WM8753 rec mixer output
-
Takashi Iwai authored
-
Risto Suominen authored
Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Risto Suominen authored
Add mixer controls for PowerMac G4 AGP (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Rob Sims authored
Rob Sims wrote: "I can't seem to turn on register 0x17, bit 3 in the sound chip, except by codec_reg_write; the mixer lacks direct or indirect control. It seems there are two names for the output of the rec mixer: Capture ST Mixer Playback Mixer Would the following do the trick?" I confirm that this solves the audio problems I was having. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kumar Gala authored
Commit 00c5372d caused the MPC8544DS board to hang at boot. The MPC8544DS is unique in that it doesn't use the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD). So the dummy read at the end of the address space causes us to hang. We can detect the situation by comparing the bridge's BARs versus the root complex. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
Bruce Allan authored
Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 01 Oct, 2008 12 commits
-
-
Mike Rapoport authored
This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e964455 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vmi: fix broken LDT access x86: fix typo in enable_mtrr_cleanup early parameter
-
David Howells authored
Fix the IRQ handling on the MN10300 arch. This patch makes a number of significant changes: (1) It separates the irq_chip definition for edge-triggered interrupts from the one for level-triggered interrupts. This is necessary because the MN10300 PIC latches the IRQ channel's interrupt request bit (GxICR_REQUEST), even after the device has ceased to assert its interrupt line and the interrupt channel has been disabled in the PIC. So for level-triggered interrupts we need to clear this bit when we re-enable - which is achieved by setting GxICR_DETECT but not GxICR_REQUEST when writing to the register. Not doing this results in spurious interrupts occurring because calling mask_ack() at the start of handle_level_irq() is insufficient - it fails to clear the REQUEST latch because the device that caused the interrupt is still asserting its interrupt line at this point. (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (4) The end() operation is now left to the default (no-operation) as __do_IRQ() is compiled out. This may affect misrouted_irq(), but according to Thomas Gleixner it's the correct thing to do. (5) handle_level_irq() is used for edge-triggered interrupts rather than handle_edge_irq() as the MN10300 PIC latches interrupt events even on masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is sufficient to call mask_ack() at the start and unmask() at the end. (6) For level-triggered interrupts, ack() is now NULL as it's not used, and there is no effective ACK function on the PIC. mask_ack() is now the same as mask() as the latch continues to latch, even when the channel is masked. Further, the patch discards the disable() op implementation as its now the same as the mask() op implementation, which is used instead. It also discards the enable() op implementations as they're now the same as the unmask() op implementations, which are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm mpath: add missing path switching locking dm: cope with access beyond end of device in dm_merge_bvec dm: always allow one page in dm_merge_bvec
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: af_key: Free dumping state on socket close XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep ipv6: NULL pointer dereferrence in tcp_v6_send_ack tcp: Fix NULL dereference in tcp_4_send_ack() sctp: Fix kernel panic while process protocol violation parameter iucv: Fix mismerge again. ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space
-
Chandra Seetharaman authored
Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Timo Teras authored
Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaud Ebalard authored
ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 <ME,IR,DR> CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54, while adding network namespaces support to ipv6 routes. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding in IPv4 code. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vitaliy Gusev authored
Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: <IRQ> [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303 [<ffffffff80465a9b>] process_backlog+0x80/0xd0 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f [<ffffffff80234cc5>] __do_softirq+0xa3/0x164 [<ffffffff8020c52c>] call_softirq+0x1c/0x28 <EOI> [<ffffffff8020de1c>] do_softirq+0x34/0x72 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14 [<ffffffff804599cd>] release_sock+0xb8/0xc1 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8045751f>] sys_connect+0x68/0x8e [<ffffffff80291818>] ? fd_install+0x5f/0x68 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 RSP <ffffffff80762b78> CR2: 00000000000004d0 Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Sep, 2008 4 commits
-
-
Zachary Amsden authored
This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: stable@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Zachary Amsden authored
After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3eSigned-off-by: Zachary Amsden <zach@vmware.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Put the space for cpu0 per-cpu area into .data section
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix model for Dell Inspiron 1525 ALSA: ASoC: Fix cs4270 error path
-