1. 06 Apr, 2016 9 commits
    • Johannes Berg's avatar
      mac80211: add fast-rx path · 49ddf8e6
      Johannes Berg authored
      The regular RX path has a lot of code, but with a few
      assumptions on the hardware it's possible to reduce the
      amount of code significantly. Currently the assumptions
      on the driver are the following:
       * hardware/driver reordering buffer (if supporting aggregation)
       * hardware/driver decryption & PN checking (if using encryption)
       * hardware/driver did de-duplication
       * hardware/driver did A-MSDU deaggregation
       * AP_LINK_PS is used (in AP mode)
       * no client powersave handling in mac80211 (in client mode)
      
      of which some are actually checked per packet:
       * de-duplication
       * PN checking
       * decryption
      and additionally packets must
       * not be A-MSDU (have been deaggregated by driver/device)
       * be data packets
       * not be fragmented
       * be unicast
       * have RFC 1042 header
      
      Additionally dynamically we assume:
       * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed
       * station must be authorized
       * 4-addr format not enabled
      
      Some data needed for the RX path is cached in a new per-station
      "fast_rx" structure, so that we only need to look at this and
      the packet, no other memory when processing packets on the fast
      RX path.
      
      After doing the above per-packet checks, the data path collapses
      down to a pretty simple conversion function taking advantage of
      the data cached in the small fast_rx struct.
      
      This should speed up the RX processing, and will make it easier
      to reason about parallelizing RX (for which statistics will need
      to be per-CPU still.)
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      49ddf8e6
    • Johannes Berg's avatar
      mac80211: fix RX u64 stats consistency on 32-bit platforms · 0f9c5a61
      Johannes Berg authored
      On 32-bit platforms, the 64-bit counters we keep need to be protected
      to be consistently read. Use the u64_stats_sync mechanism to do that.
      
      In order to not end up with overly long lines, refactor the tidstats
      assignments a bit.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      0f9c5a61
    • Johannes Berg's avatar
      mac80211: fix last RX rate data consistency · 4f6b1b3d
      Johannes Berg authored
      When storing the last_rate_* values in the RX code, there's nothing
      to guarantee consistency, so a concurrent reader could see, e.g.
      last_rate_idx on the new value, but last_rate_flag still on the old,
      getting completely bogus values in the end.
      
      To fix this, I lifted the sta_stats_encode_rate() function from my
      old rate statistics code, which encodes the entire rate data into a
      single 16-bit value, avoiding the consistency issue.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      4f6b1b3d
    • Johannes Berg's avatar
      mac80211: add separate last_ack variable · b8da6b6a
      Johannes Berg authored
      Instead of touching the rx_stats.last_rx from the status path, introduce
      and use a status_stats.last_ack variable. This will make rx_stats.last_rx
      indicate when the last frame was received, making it available for real
      "last_rx" and statistics gathering; statistics, when done per-CPU, will
      need to figure out which place was updated last for those items where the
      "last" value is exposed.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      b8da6b6a
    • Johannes Berg's avatar
      mac80211: remove rx_stats.last_rx update after sta alloc · 2df8bfd7
      Johannes Berg authored
      There's no need to update rx_stats.last_rx after allocating
      a station since it's already updated during allocation.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      2df8bfd7
    • Johannes Berg's avatar
      mac80211: move averaged values out of rx_stats · 0be6ed13
      Johannes Berg authored
      Move the averaged values out of rx_stats and into rx_stats_avg,
      to cleanly split them out. The averaged ones cannot be supported
      for parallel RX in a per-CPU fashion, while the other values can
      be collected per CPU and then combined/selected when needed.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      0be6ed13
    • Johannes Berg's avatar
      mac80211: move semicolon out of CALL_RXH macro · 8ebaa5b0
      Johannes Berg authored
      Move the semicolon, people typically assume that and
      once line already put a semicolon behind the "call".
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      8ebaa5b0
    • Johannes Berg's avatar
      mac80211: count MSDUs in A-MSDU properly · de8f18d3
      Johannes Berg authored
      For the RX MSDU statistics, we need to count the number of
      MSDUs created and accepted from an A-MSDU. Right now, all
      frames in any A-MSDUs were completely ignored. Fix this by
      moving the RX MSDU statistics accounting into the deliver
      function.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      de8f18d3
    • Johannes Berg's avatar
      mac80211: allow passing transmitter station on RX · d63b548f
      Johannes Berg authored
      Sometimes drivers already looked up, or know out-of-band
      from their device, which station transmitted a given RX
      frame. Allow them to pass the station pointer to mac80211
      to save the extra lookup.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      d63b548f
  2. 05 Apr, 2016 31 commits
    • Bob Copeland's avatar
      mac80211: mesh: flush paths outside of plink lock · e596af82
      Bob Copeland authored
      Lockdep warned of a lock dependency between the mesh_plink lock
      and the internal lock for the rhashtable.  The problem is that
      the rhashtable code uses a spin lock with softirqs enabled, while
      mesh_plink_timer executes a walk (to flush paths on a state change)
      inside a softirq with the plink lock held.
      
      This leads to the following deadlock if the timer fires while rht
      lock is held on this CPU, and plink lock is held on another CPU:
      
         CPU0                         CPU1
         ----                         ----
         lock(&(&ht->lock)->rlock);
                                      local_irq_disable();
                                      lock(&(&sta->mesh->plink_lock)->rlock);
                                      lock(&(&ht->lock)->rlock);
         <Interrupt>
         lock(&(&sta->mesh->plink_lock)->rlock);
         *** DEADLOCK ***
      
      Fix by waiting until we drop the plink lock to flush paths.
      
      Fixes: d48a1b7cd439 ("mac80211: mesh: convert path table to rhashtable")
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      e596af82
    • Bob Copeland's avatar
      mac80211: mesh: fix cleanup for mesh pathtable · 0371a08f
      Bob Copeland authored
      The mesh path table needs to be around for the entire time the
      interface is in mesh mode, as users can perform an mpath dump
      at any time.  The existing path table lifetime is instead tied
      to the mesh BSS which can cause crashes when different MBSSes
      are joined in the context of a single interface, or when the
      path table is dumped when no MBSS is joined.
      
      Introduce a new function to perform the final teardown of the
      interface and perform path table cleanup there.  We already
      free the individual path elements when the leaving the mesh
      so no additional cleanup is needed there.  This fixes the
      following crash:
      
      [   47.753026] BUG: unable to handle kernel paging request at fffffff0
      [   47.753026] IP: [<c0239765>] kthread_data+0xa/0xe
      [   47.753026] *pde = 00741067 *pte = 00000000
      [   47.753026] Oops: 0000 [#4] PREEMPT
      [   47.753026] Modules linked in: ppp_generic slhc 8021q garp mrp sch_fq_codel iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables ath9k_htc ath5k 8139too ath10k_pci ath10k_core arc4 ath9k ath9k_common ath9k_hw mac80211 ath cfg80211 cpufreq_powersave br_netfilter bridge stp llc ipw usb_wwan sierra_net usbnet af_alg natsemi via_rhine mii iTCO_wdt iTCO_vendor_support gpio_ich sierra coretemp pcspkr i2c_i801 lpc_ich ata_generic ata_piix libata ide_pci_generic piix e1000e igb i2c_algo_bit ptp pps_core [last unloaded: 8139too]
      [   47.753026] CPU: 0 PID: 12 Comm: kworker/u2:1 Tainted: G      D W       4.5.0-wt-V3 #6
      [   47.753026] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016  11/07/2014
      [   47.753026] task: f645a0c0 ti: f6462000 task.ti: f6462000
      [   47.753026] EIP: 0060:[<c0239765>] EFLAGS: 00010002 CPU: 0
      [   47.753026] EIP is at kthread_data+0xa/0xe
      [   47.753026] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
      [   47.753026] ESI: f645a0c0 EDI: f645a2fc EBP: f6463a80 ESP: f6463a78
      [   47.753026]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
      [   47.753026] CR0: 8005003b CR2: 00000014 CR3: 353e5000 CR4: 00000690
      [   47.753026] Stack:
      [   47.753026]  c0236866 00000000 f6463aac c05768b4 00000009 f6463ba8 f6463ab0 c0247010
      [   47.753026]  00000000 f645a0c0 f6464000 00000009 f6463ba8 f6463ab8 c0576eb2 f645a0c0
      [   47.753026]  f6463aec c0228be4 c06335a4 f6463adc f6463ad0 c06c06d4 f6463ae4 c02471b0
      [   47.753026] Call Trace:
      [   47.753026]  [<c0236866>] ? wq_worker_sleeping+0xb/0x78
      [   47.753026]  [<c05768b4>] __schedule+0xda/0x587
      [   47.753026]  [<c0247010>] ? vprintk_default+0x12/0x14
      [   47.753026]  [<c0576eb2>] schedule+0x72/0x89
      [   47.753026]  [<c0228be4>] do_exit+0xb8/0x71d
      [   47.753026]  [<c02471b0>] ? kmsg_dump+0xa9/0xae
      [   47.753026]  [<c0203576>] oops_end+0x69/0x70
      [   47.753026]  [<c021dcdb>] no_context+0x1bb/0x1c5
      [   47.753026]  [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021de32>] bad_area_nosemaphore+0xd/0x10
      [   47.753026]  [<c021e0a1>] __do_page_fault+0x26c/0x320
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021e2fa>] do_page_fault+0xb/0xd
      [   47.753026]  [<c05798f8>] error_code+0x58/0x60
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c0239765>] ? kthread_data+0xa/0xe
      [   47.753026]  [<c0236866>] ? wq_worker_sleeping+0xb/0x78
      [   47.753026]  [<c05768b4>] __schedule+0xda/0x587
      [   47.753026]  [<c0247010>] ? vprintk_default+0x12/0x14
      [   47.753026]  [<c0576eb2>] schedule+0x72/0x89
      [   47.753026]  [<c0228be4>] do_exit+0xb8/0x71d
      [   47.753026]  [<c02471b0>] ? kmsg_dump+0xa9/0xae
      [   47.753026]  [<c0203576>] oops_end+0x69/0x70
      [   47.753026]  [<c021dcdb>] no_context+0x1bb/0x1c5
      [   47.753026]  [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021de32>] bad_area_nosemaphore+0xd/0x10
      [   47.753026]  [<c021e0a1>] __do_page_fault+0x26c/0x320
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021e2fa>] do_page_fault+0xb/0xd
      [   47.753026]  [<c05798f8>] error_code+0x58/0x60
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c0239765>] ? kthread_data+0xa/0xe
      [   47.753026]  [<c0236866>] ? wq_worker_sleeping+0xb/0x78
      [   47.753026]  [<c05768b4>] __schedule+0xda/0x587
      [   47.753026]  [<c0391e32>] ? put_io_context_active+0x6d/0x95
      [   47.753026]  [<c0576eb2>] schedule+0x72/0x89
      [   47.753026]  [<c02291f8>] do_exit+0x6cc/0x71d
      [   47.753026]  [<c0203576>] oops_end+0x69/0x70
      [   47.753026]  [<c021dcdb>] no_context+0x1bb/0x1c5
      [   47.753026]  [<c021de1b>] __bad_area_nosemaphore+0x136/0x140
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021de32>] bad_area_nosemaphore+0xd/0x10
      [   47.753026]  [<c021e0a1>] __do_page_fault+0x26c/0x320
      [   47.753026]  [<c03b9160>] ? debug_smp_processor_id+0x12/0x16
      [   47.753026]  [<c02015e2>] ? __switch_to+0x24/0x40e
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c021e2fa>] do_page_fault+0xb/0xd
      [   47.753026]  [<c05798f8>] error_code+0x58/0x60
      [   47.753026]  [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a
      [   47.753026]  [<c03b59d2>] ? rhashtable_walk_init+0x5c/0x93
      [   47.753026]  [<f9843221>] mesh_path_tbl_expire.isra.24+0x19/0x82 [mac80211]
      [   47.753026]  [<f984408b>] mesh_path_expire+0x11/0x1f [mac80211]
      [   47.753026]  [<f9842bb7>] ieee80211_mesh_work+0x73/0x1a9 [mac80211]
      [   47.753026]  [<f98207d1>] ieee80211_iface_work+0x2ff/0x311 [mac80211]
      [   47.753026]  [<c0235fa3>] process_one_work+0x14b/0x24e
      [   47.753026]  [<c0236313>] worker_thread+0x249/0x343
      [   47.753026]  [<c02360ca>] ? process_scheduled_works+0x24/0x24
      [   47.753026]  [<c0239359>] kthread+0x9e/0xa3
      [   47.753026]  [<c0578e50>] ret_from_kernel_thread+0x20/0x40
      [   47.753026]  [<c02392bb>] ? kthread_parkme+0x18/0x18
      [   47.753026] Code: 6b c0 85 c0 75 05 e8 fb 74 fc ff 89 f8 84 c0 75 08 8d 45 e8 e8 34 dd 33 00 83 c4 28 5b 5e 5f 5d c3 55 8b 80 10 02 00 00 89 e5 5d <8b> 40 f0 c3 55 b9 04 00 00 00 89 e5 52 8b 90 10 02 00 00 8d 45
      [   47.753026] EIP: [<c0239765>] kthread_data+0xa/0xe SS:ESP 0068:f6463a78
      [   47.753026] CR2: 00000000fffffff0
      [   47.753026] ---[ end trace 867ca0bdd0767790 ]---
      
      Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh")
      Reported-by: default avatarFred Veldini <fred.veldini@gmail.com>
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      0371a08f
    • Bob Copeland's avatar
      mac80211: mesh: fix mesh path kerneldoc · 68bb54b4
      Bob Copeland authored
      Several of the mesh path fields are undocumented and some
      of the documentation is no longer correct or relevant after
      the switch to rhashtable.  Clean up the kernel doc
      accordingly and reorder some fields to match the structure
      layout.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      68bb54b4
    • Bob Copeland's avatar
      mac80211: mesh: reorder structure members · 3257523b
      Bob Copeland authored
      Reduce padding waste in struct mesh_table and struct rmc_entry by
      moving the smaller fields to the end.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      3257523b
    • Bob Copeland's avatar
      mac80211: mesh: embed gates hlist head directly · 18b27ff7
      Bob Copeland authored
      Since we have converted the mesh path tables to rhashtable, we are
      no longer swapping out the entire mesh_pathtbl pointer with RCU.
      As a result, we no longer need indirection to the hlist head for
      the gates list and can simply embed it, saving a pair of
      pointer-sized allocations.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      18b27ff7
    • Bob Copeland's avatar
      mac80211: mesh: use hlist for rmc cache · 47a0489c
      Bob Copeland authored
      The RMC cache has 256 list heads plus a u32, which puts it at the
      unfortunate size of 4104 bytes with padding.  kmalloc() will then
      round this up to the next power-of-two, so we wind up actually
      using two pages here where most of the second is wasted.
      
      Switch to hlist heads here to reduce the structure size down to
      fit within a page.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      47a0489c
    • Bob Copeland's avatar
      mac80211: mesh: handle failed alloc for rmc cache · 0aa7fabb
      Bob Copeland authored
      In the unlikely case that mesh_rmc_init() fails with -ENOMEM,
      the rmc pointer will be left as NULL but the interface is still
      operational because ieee80211_mesh_init_sdata() is not allowed
      to fail.
      
      If this happens, we would blindly dereference rmc when checking
      whether a multicast frame is in the cache.  Instead just drop the
      frames in the forwarding path.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      0aa7fabb
    • Bob Copeland's avatar
      mac80211: mesh: fix crash in mesh_path_timer · 74932959
      Bob Copeland authored
      The mesh_path_reclaim() function, called from an rcu callback, cancels
      the mesh_path_timer associated with a mesh path.  Unfortunately, this
      call can happen much later, perhaps after the hash table itself is
      destroyed.
      
      Such a situation led to the following crash in mesh_path_send_to_gates()
      when dereferencing the tbl pointer:
      
      [   23.901661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
      [   23.905516] IP: [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740
      [   23.908757] PGD 99ca067 PUD 99c4067 PMD 0
      [   23.910789] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      [   23.913485] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-wt+ #43
      [   23.916675] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
      [   23.920471] task: ffffffff81685500 ti: ffffffff81678000 task.ti: ffffffff81678000
      [   23.922619] RIP: 0010:[<ffffffff814c910b>]  [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740
      [   23.925237] RSP: 0018:ffff88000b403d30  EFLAGS: 00010286
      [   23.926739] RAX: 0000000000000000 RBX: ffff880009bc0d20 RCX: 0000000000000102
      [   23.928796] RDX: 000000000000002e RSI: 0000000000000001 RDI: ffff880009bc0d20
      [   23.930895] RBP: ffff88000b403e18 R08: 0000000000000001 R09: 0000000000000001
      [   23.932917] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880009c20940
      [   23.936370] R13: ffff880009bc0e70 R14: ffff880009c21c40 R15: ffff880009bc0d20
      [   23.939823] FS:  0000000000000000(0000) GS:ffff88000b400000(0000) knlGS:0000000000000000
      [   23.943688] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [   23.946429] CR2: 0000000000000008 CR3: 00000000099c5000 CR4: 00000000000006b0
      [   23.949861] Stack:
      [   23.950840]  000000000000002e ffff880009c20940 ffff88000b403da8 ffffffff8109e551
      [   23.954467]  ffffffff82711be2 000000000000002e 0000000000000000 ffffffff8166a5f5
      [   23.958141]  0000000000685ce8 0000000000000246 ffff880009bc0d20 ffff880009c20940
      [   23.961801] Call Trace:
      [   23.962987]  <IRQ>
      [   23.963963]  [<ffffffff8109e551>] ? vprintk_emit+0x351/0x5e0
      [   23.966782]  [<ffffffff8109e8ff>] ? vprintk_default+0x1f/0x30
      [   23.969529]  [<ffffffff810ffa41>] ? printk+0x48/0x50
      [   23.971956]  [<ffffffff814ceef3>] mesh_path_timer+0x133/0x160
      [   23.974707]  [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230
      [   23.977775]  [<ffffffff810b04ee>] call_timer_fn+0xce/0x330
      [   23.980448]  [<ffffffff810b0425>] ? call_timer_fn+0x5/0x330
      [   23.983126]  [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230
      [   23.986091]  [<ffffffff810b097c>] run_timer_softirq+0x22c/0x390
      
      Instead of cancelling in the RCU callback, set a new flag to prevent the
      timer from being rearmed, and then cancel the timer synchronously when
      freeing the mesh path.  This leaves mesh_path_reclaim() doing nothing
      but kfree, so switch to kfree_rcu().
      
      Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh")
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      74932959
    • Ayala Beker's avatar
      mac80211: track and tell driver about GO client P2P PS abilities · 52cfa1d6
      Ayala Beker authored
      Legacy clients don't support P2P power save mechanism, and thus if a P2P GO
      has a legacy client connected to it, it should disable P2P PS mechanisms.
      Let the driver know about this with a new bss_conf parameter.
      Signed-off-by: default avatarAyala Beker <ayala.beker@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      52cfa1d6
    • Ayala Beker's avatar
      cfg80211: allow userspace to specify client P2P PS support · 17b94247
      Ayala Beker authored
      Legacy clients don't support P2P power save mechanisms, and thus
      if a P2P GO has a legacy client connected to it, it has to make
      some changes in the PS behavior.
      
      To handle this, add an attribute to specify whether a station supports
      P2P PS or not. If the attribute was not specified cfg80211 will assume
      that station supports it for P2P GO interface, and does NOT support it
      for AP interface, matching the current assumptions in the code.
      Signed-off-by: default avatarAyala Beker <ayala.beker@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      17b94247
    • Johannes Berg's avatar
      mac80211: avoid useless memory write on each frame RX · b100e5d6
      Johannes Berg authored
      In the likely case that probe_count is 0, don't write to the
      memory there.
      
      Also use ifmgd consistently in the function, instead of using
      sdata->u.mgd as well.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      b100e5d6
    • Johannes Berg's avatar
      mac80211: fix cipher scheme function name · 2c61cf9c
      Johannes Berg authored
      The code is only used with iwlwifi, but still should have proper
      mac80211 naming scheme; fix that.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      2c61cf9c
    • Johannes Berg's avatar
      mac80211: clean up station flags debugfs · c84387d2
      Johannes Berg authored
      Avoid the really strange %s%s%s expression, use an array
      of flag names and check that all flags are present.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      c84387d2
    • Avraham Stern's avatar
      ieee80211: support parsing Fine Timing Measurement action frame · 3c5bcb2e
      Avraham Stern authored
      Add definition for Fine Timing Measurement (FTM) frame format
      as defined in IEEE802.11-REVmcD5.0 section 9.6.8.33
      Signed-off-by: default avatarAvraham Stern <avraham.stern@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      3c5bcb2e
    • Johannes Berg's avatar
      mac80211: don't start dynamic PS timer if not needed · 602fae42
      Johannes Berg authored
      If the device implements dynamic PS itself, there's no need
      to ever start the dynamic powersave timer on RX.
      
      While at it, fix up some indentation in this code.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      602fae42
    • Johannes Berg's avatar
      mac80211: remove sta_info debugfs sub-struct · fc4a25c5
      Johannes Berg authored
      Since the previous patch, the struct only has a single member,
      so remove the struct and leave just the single member.
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      fc4a25c5
    • Mohammed Shafi Shajakhan's avatar
      mac80211: Remove unused variable in per STA debugfs struct · 96f321c9
      Mohammed Shafi Shajakhan authored
      Remove unused variable in per STA debugfs structure, 'commit 34e89507
      ("mac80211: allow station add/remove to sleep")' removed the only user of
      'add_has_run'.
      Signed-off-by: default avatarMohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      96f321c9
    • Sara Sharon's avatar
      mac80211: enable starting BA session with custom timeout · 1e0bbeba
      Sara Sharon authored
      Currently the debugfs entry for starting aggregation session
      starts it with timeout of 5 seconds. Allow opening a session
      with a custom timeout (according to spec 0 is no timeout).
      while at it, refactor the function and remove the magic numbers.
      Signed-off-by: default avatarSara Sharon <sara.sharon@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      1e0bbeba
    • Sara Sharon's avatar
      mac80211: add NETIF_F_RXCSUM to features white list · e0352123
      Sara Sharon authored
      NETIF_F_RXCSUM is not in the white list, though some
      drivers may want to set it in order to enable seeing the
      actual RX checksum status in ethtool.
      Signed-off-by: default avatarSara Sharon <sara.sharon@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      e0352123
    • Emmanuel Grumbach's avatar
      mac80211: Set global RRM capability · f278ce4f
      Emmanuel Grumbach authored
      Allow publishing RRM capabilities for features that are not
      HW dependent.
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      f278ce4f
    • Akira Moroo's avatar
      cfg80211: fix kernel-doc struct name · 2aa4d456
      Akira Moroo authored
      This patch fix a structure name mismatch in cfg80211.h.
      Signed-off-by: default avatarMoroo Akira <retrage01@gmail.com>
      Reviewed-by: default avatarJulian Calaby <julian.calaby@gmail.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      2aa4d456
    • Felix Fietkau's avatar
      mac80211: minstrel_ht: improve sample rate skip logic · 06171e9c
      Felix Fietkau authored
      There were a few issues that were slowing down the process of finding
      the optimal rate, especially on devices with multi-rate retry
      limitations:
      
      When max_tp_rate[0] was slower than max_tp_rate[1], the code did not
      sample max_tp_rate[1], which would often allow it to switch places with
      max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the
      rate is otherwise good).
      
      Also, sample attempts of rates between max_tp_rate[0] and [1] were being
      ignored in this case, because the code only checked if the rate was
      slower than [1].
      
      Fix this by checking against the fastest / second fastest max_tp_rate
      instead of assuming a specific order between the two.
      
      In my tests this patch significantly reduces the time until minstrel_ht
      finds the optimal rate right after assoc
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      06171e9c
    • Felix Fietkau's avatar
      mac80211: do not pass injected frames without a valid rate to the driver · 07310a63
      Felix Fietkau authored
      Fall back to rate control if the requested bitrate was not found.
      
      Fixes: dfdfc2be ("mac80211: Parse legacy and HT rate in injected frames")
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      07310a63
    • Sven Eckelmann's avatar
      mac80211: fix parsing of 40Mhz in injected radiotap header · f66b60f6
      Sven Eckelmann authored
      The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2
      bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if
      the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be
      confused with IEEE80211_RADIOTAP_MCS_BW_20U.
      
      Fixes: dfdfc2be ("mac80211: Parse legacy and HT rate in injected frames")
      Signed-off-by: default avatarSven Eckelmann <sven@narfation.org>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      f66b60f6
    • Arend van Spriel's avatar
      nl80211: add feature for BSS selection support · 38de03d2
      Arend van Spriel authored
      Introducing a new feature that the driver can use to
      indicate the driver/firmware supports configuration of BSS
      selection criteria upon CONNECT command. This can be useful
      when multiple BSS-es are found belonging to the same ESS,
      ie. Infra-BSS with same SSID. The criteria can then be used to
      offload selection of a preferred BSS.
      Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
      Reviewed-by: default avatarFranky (Zhenhui) Lin <frankyl@broadcom.com>
      Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
      Reviewed-by: default avatarLei Zhang <leizh@broadcom.com>
      Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
      [move wiphy support check into parse_bss_select()]
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      38de03d2
    • Sara Sharon's avatar
      mac80211: synchronize driver rx queues before removing a station · f59374eb
      Sara Sharon authored
      Some devices, like iwlwifi, have RSS queues. This may cause a
      situation where a disassociation is handled in control path and
      results in station removal while there are prior RX frames
      that were still not processed in other queues. When they will
      be processed the station will be gone, and the frames will be
      dropped.
      Add a synchronization interface to avoid that. When driver returns
      from the synchronization mac80211 may remove the station.
      Signed-off-by: default avatarSara Sharon <sara.sharon@intel.com>
      Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      f59374eb
    • Bob Copeland's avatar
      mac80211: mesh: convert path table to rhashtable · 60854fd9
      Bob Copeland authored
      In the time since the mesh path table was implemented as an
      RCU-traversable, dynamically growing hash table, a generic RCU
      hashtable implementation was added to the kernel.
      
      Switch the mesh path table over to rhashtable to remove some code
      and also gain some features like automatic shrinking.
      
      Cc: Thomas Graf <tgraf@suug.ch>
      Cc: netdev@vger.kernel.org
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      60854fd9
    • Bob Copeland's avatar
      rhashtable: accept GFP flags in rhashtable_walk_init · 8f6fd83c
      Bob Copeland authored
      In certain cases, the 802.11 mesh pathtable code wants to
      iterate over all of the entries in the forwarding table from
      the receive path, which is inside an RCU read-side critical
      section.  Enable walks inside atomic sections by allowing
      GFP_ATOMIC allocations for the walker state.
      
      Change all existing callsites to pass in GFP_KERNEL.
      Acked-by: default avatarThomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      [also adjust gfs2/glock.c and rhashtable tests]
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      8f6fd83c
    • Bob Copeland's avatar
      mac80211: mesh: embed known gates list in struct mesh_path · 947c2a0e
      Bob Copeland authored
      The mesh path table uses a struct mesh_node in its hlists in
      order to support a resizable hash table: the mesh_node provides
      an indirection to the actual mesh path so that two different
      bucket lists can point to the same path entry.
      
      However, for the known gates list, we don't need this indirection
      because there is ever only one list.  So we can just embed the
      hlist_node in the mesh path itself, which simplifies things a bit
      and saves a linear search whenever we need to find an item in
      the list.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      947c2a0e
    • Bob Copeland's avatar
      mac80211: mesh: factor out common mesh path allocation code · b15dc38b
      Bob Copeland authored
      Remove duplicate code to allocate and initialize a mesh
      path or mesh proxy path.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      b15dc38b
    • Bob Copeland's avatar
      mac80211: mesh: don't hash sdata in mpath tables · 44395481
      Bob Copeland authored
      Now that the sdata pointer is the same for all entries of a
      path table, hashing it is pointless, so hash only the address.
      Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      44395481