- 12 Feb, 2019 40 commits
-
-
Alexey Kardashevskiy authored
[ Upstream commit bdbf649e ] The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE table and a table with userspace addresses; the latter is used for marking pages dirty when corresponging TCEs are unmapped from the hardware table. a68bd126 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand") enabled on-demand allocation of the hardware table, however it missed the other table so it has still been fully allocated at the boot time. This fixes the issue by allocating a single level, just like we do for the hardware table. Fixes: a68bd126 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Naftali Goldstein authored
[ Upstream commit 189b8d44 ] The FW expects to get the ppe value for each NSS-BW pair in the same format as in the he phy capabilities IE, which means that a value of 0 implies ppe should be used for BPSK (mcs 0). If there are no PPE thresholds in the IE, or if for some NSS-RU pair there's no threshold set for it (this could happen because it's a variable-sized field), it means no PPE should not be used for that pair, so the value sent to FW should be 7 which corresponds to "none". Fixes: 514c3069 ("iwlwifi: add support for IEEE802.11ax") Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Madhavan Srinivasan authored
[ Upstream commit 17cfccc9 ] MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value. Thresholding counter can be used to count latency cycles such as load miss to reload. But threshold counter value is not relevant when the sampled instruction type is unknown or reserved. Patch to fix the thresholding counter value to zero when sampled instruction type is unknown or reserved. Fixes: 170a315f('powerpc/perf: Support to export MMCRA[TEC*] field to userspace') Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Jian Shen authored
[ Upstream commit 75edb610 ] Each pf supports max 64 vectors and 128 tqps. For 2p/4p core scenario, there may be more than 64 cpus online. So the result of min_t(u16, num_Online_cpus(), tqp_num) may be more than 64. This patch adds check for the vector number. Fixes: dd38c726 ("net: hns3: fix for coalesce configuration lost during reset") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 4f68ef64 ] The function cw1200_bss_info_changed() and cw1200_hw_scan() can be concurrently executed. The two functions both access a possible shared variable "frame.skb". This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(), which is called by cw1200_bss_info_changed(). The free operation is protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed(). In cw1200_hw_scan(), this shared variable is accessed without the protection of the mutex lock "priv->conf_mutex". Thus, concurrency use-after-free bugs may occur. To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and mutex_unlock(&priv->conf_mutex) are moved to the places, which can protect the accesses to the shared variable. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Mahesh Rajashekhara authored
[ Upstream commit 65111785 ] Problem: - during the driver initialization, driver will poll fw for KERNEL_UP in a 30 seconds timeout. - if the firmware is not ready after 30 seconds, driver will not be loaded. Fix: - change timeout from 30 seconds to 3 minutes. Reported-by:
Feng Li <lifeng1519@gmail.com> Reviewed-by:
Ajish Koshy <ajish.koshy@microsemi.com> Reviewed-by:
Murthy Bhat <Murthy.Bhat@microsemi.com> Reviewed-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dave Carroll authored
[ Upstream commit 7ff44499 ] - fix race condition when a unit is deleted after an RLL, and before we have gotten the LV_STATUS page of the unit. - In this case we will get a standard inquiry, rather than the desired page. This will result in a unit presented which no longer exists. - If we ask for LV_STATUS, insure we get LV_STATUS Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
-
Mahesh Rajashekhara authored
[ Upstream commit b2346b50 ] Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
-
Ido Schimmel authored
[ Upstream commit be2d6f42 ] When a LAG device or a VLAN device on top of it is enslaved to a bridge, the driver propagates the CHANGEUPPER event to the LAG's slaves. This causes each physical port to increase the reference count of the internal representation of the bridge port by calling mlxsw_sp_port_bridge_join(). However, when a port is removed from a LAG, the corresponding leave() function is not called and the reference count is not decremented. This leads to ugly hacks such as mlxsw_sp_bridge_port_should_destroy() that try to understand if the bridge port should be destroyed even when its reference count is not 0. Instead, make sure that when a port is unlinked from a LAG it would see the same events as if the LAG (or its uppers) were unlinked from a bridge. The above is achieved by walking the LAG's uppers when a port is unlinked and calling mlxsw_sp_port_bridge_leave() for each upper that is enslaved to a bridge. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit fa89a459 ] gcc warn this: net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn: always true condition '(spi <= 4294967295) => (0-u32max <= u32max)' 'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX because of wrap around. So the second forloop will never reach. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit efc38dd7 ] Due to the alignment handling, it actually matters where in the code we add the 4 bytes for the presence bitmap to the length; the first field is the timestamp with 8 byte alignment so we need to add the space for the extra vendor namespace presence bitmap *before* we do any alignment for the fields. Move the presence bitmap length accounting to the right place to fix the alignment for the data properly. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 05a4ab82 ] With the following piece of code, the following compilation warning is encountered: if (_IOC_DIR(ioc) != _IOC_NONE) { int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) { drivers/platform/test/dev.c: In function 'my_ioctl': drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable] int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ; This patch fixes it by referencing 'type' in the macro allthough doing nothing with it. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Eric Yang authored
[ Upstream commit 12750d16 ] [Why] YCbCr420 packing format uses two chanels for luma, and 1 channel for both chroma component. Our previous implementation did not account for this and results in every other pixel having very high luma value, showing greyish color instead of black. YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> ..... YCbCr420 = <Y1, Y2, Cb1>; <Y3, Y4, Cr1> ..... [How] Program the second channel with the black color value for luma as well. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Hugo Hu <Hugo.Hu@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 28ac03b9 ] On some systems that actually have the bluetooth controller wired up with an extra clock signal, it's possible the bluetooth controller probes before the clock provider. clk_get would return a defer probe error, which was not handled by this driver. Handle this properly, so that these systems can work reliably. Tested-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Paul Hsieh authored
[ Upstream commit bd4905a9 ] [WHY] On customer board, there is one pluse (1v , < 1ms) on DDC_CLK pin when plug / unplug DP cable. Driver will read it and config DP to HDMI/DVI dongle. [HOW] If there is a real dongle, DDC_CLK should be always pull high. Try to read again to recovery this special case. Retry times = 3. Need additional 3ms to detect DP passive dongle(3 failures) Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Reviewed-by:
-
Huazhong Tan authored
[ Upstream commit ae6017a7 ] In the hns3_nic_uninit_vector_data(), the procedure of uninitializing the tqp_vector's IRQ has not set affinity_notify to NULL and changes its init flag. This patch fixes it. And for simplificaton, local variable tqp_vector is used instead of priv->tqp_vector[i]. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Dennis Zhou authored
[ Upstream commit 6ab7d47b ] From Michael Cree: "Bisection lead to commit b38d08f3 ("percpu: restructure locking") as being the cause of lockups at initial boot on the kernel built for generic Alpha. On a suggestion by Tejun Heo that: So, the only thing I can think of is that it's calling spin_unlock_irq() while irq handling isn't set up yet. Can you please try the followings? 1. Convert all spin_[un]lock_irq() to spin_lock_irqsave/unlock_irqrestore()." Fixes: b38d08f3 ("percpu: restructure locking") Reported-and-tested-by:
Michael Cree <mcree@orcon.net.nz> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 866053bb ] To avoid this warning: CC /tmp/build/perf/util/s390-cpumsf.o util/s390-cpumsf.c: In function 's390_cpumsf_samples': util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=] pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n", ^ Now the various Android cross toolchains used in the perf tools container test builds are all clean and we can remove this: export EXTRA_MAKE_ARGS="WERROR=0" Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 0afcf29b ] Reducing this noise when cross building to the Android NDK: util/header.c: In function 'perf_header__fprintf_info': util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign] fprintf(fp, "# captured on : %s", ctime(&st.st_ctime)); ^ In file included from util/../perf.h:5:0, from util/evlist.h:11, from util/header.c:22: /opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *' extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__; ^ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.orgSigned-off-by:
-
Bin Liu authored
[ Upstream commit 54578ee8 ] Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c0 ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bin Liu authored
[ Upstream commit 6010abf2 ] Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port. But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port. To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port. Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 0d640732 ] When we emulate an MMIO instruction, we advance the CPU state within decode_hsr(), before emulating the instruction effects. Having this logic in decode_hsr() is opaque, and advancing the state before emulation is problematic. It gets in the way of applying consistent single-step logic, and it prevents us from being able to fail an MMIO instruction with a synchronous exception. Clean this up by only advancing the CPU state *after* the effects of the instruction are emulated. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 5f30b2e8 ] kzalloc() return should always be checked - notably in example code where this may be seen as reference. On failure of allocation in livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for catching this) and NULL returned. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 439e7271 ("livepatch: introduce shadow variable API") Acked-by:
Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Doug Smythies authored
[ Upstream commit 66354690 ] This script is supposed to be allowed to run with regular user privileges if a previously captured trace is being post processed. Commit fbe31388 (tools/power/x86/intel_pstate_tracer: Free the trace buffer memory) introduced a bug that breaks that option. Commit 35459105 (tools/power/x86/intel_pstate_tracer: Add optional setting of trace buffer memory allocation) moved the code but kept the bug. This patch fixes the issue. Fixes: 35459105 (tools/power/x86/intel_pstate_tracer: Add optional ...) Signed-off-by:
Doug Smythies <dsmythies@telus.net> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 36d65be9 ] When bringing up a device, the code checks to see if the number of MSIX has changed. pci_disable_msix() should be called first before changing the number of reserved NQs/CMPL rings. This ensures that the MSIX vectors associated with the NQs/CMPL rings are still properly mapped when pci_disable_msix() masks the vectors. This patch will prevent errors when RDMA support is added for the new 57500 chips. When the RDMA driver shuts down, the number of NQs is decreased and we must use the new sequence to prevent MSIX errors. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Fabrizio Castro authored
[ Upstream commit 51243b73 ] Similarly to R-Car E3, RZ/G2E doesn't come with automatic transmission registers, as such it is not considered compatible with the existing fallback bindings. Add SoC specific binding compatibility to allow for later support for automatic transmission. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit bef0b897 ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. In this case the 'target' buffer is coming from a list of build-ids that are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so probably we're safe, but since we're using strncpy() here, use strlcpy() instead to provide the intended safety checking without the using the problematic strncpy() function. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/probe-file.c: In function 'probe_cache__open.isra.5': util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation] strncpy(sbuildid, target, SBUILD_ID_SIZE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1f3736c9 ("perf probe: Show all cached probes") Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.orgSigned-off-by:
-
Ethan Lien authored
[ Upstream commit 3cd24c69 ] Snapshot is expected to be fast. But if there are writers steadily creating dirty pages in our subvolume, the snapshot may take a very long time to complete. To fix the problem, we use tagged writepage for snapshot flusher as we do in the generic write_cache_pages(), so we can omit pages dirtied after the snapshot command. This does not change the semantics regarding which data get to the snapshot, if there are pages being dirtied during the snapshotting operation. There's a sync called before snapshot is taken in old/new case, any IO in flight just after that may be in the snapshot but this depends on other system effects that might still sync the IO. We do a simple snapshot speed test on a Intel D-1531 box: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G --direct=0 --thread=1 --numjobs=1 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 1m58sec patched: 6.54sec This is the best case for this patch since for a sequential write case, we omit nearly all pages dirtied after the snapshot command. For a multi writers, random write test: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G --direct=0 --thread=1 --numjobs=4 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 15.83sec patched: 10.35sec The improvement is smaller compared to the sequential write case, since we omit only half of the pages dirtied after snapshot command. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Ethan Lien <ethanlien@synology.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 75725880 ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/header.c: In function 'perf_event__synthesize_event_update_unit': util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] strncpy(ev->data, evsel->unit, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ util/header.c:3579:16: note: length computed here size_t size = strlen(evsel->unit); ^~~~~~~~~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6e52817 ("perf tools: Add event_update event unit type") Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit fca5085c ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: In function 'decompress_kmodule', inlined from 'dso__decompress_kmodule_fd' at util/dso.c:305:9: util/dso.c:298:3: error: 'strncpy' destination unchanged after copying no bytes [-Werror=stringop-truncation] strncpy(pathname, tmpbuf, len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC /tmp/build/perf/util/values.o CC /tmp/build/perf/util/debug.o cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c9a8a613 ("perf tools: Move the temp file processing into decompress_kmodule") Link: https://lkml.kernel.org/n/tip-tl2hdxj64tt4k8btbi6a0ugw@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
[ Upstream commit 741dad88 ] Fix inconsistent use of tabs and spaces error: # perf test 16 -v 16: Setup struct perf_event_attr : --- start --- test child forked, pid 20224 File "/usr/libexec/perf-core/tests/attr.py", line 119 log.warning("expected %s=%s, got %s" % (t, self[t], other[t])) ^ TabError: inconsistent use of tabs and spaces in indentation test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.comSigned-off-by:
-
Beomho Seo authored
[ Upstream commit 31e93364 ] Commit 391f93f2 ("serial: core: Rework hw-assited flow control support") has changed the way the autoCTS mode is handled. According to that change, serial drivers which enable H/W autoCTS mode must set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling TX. This patch adds proper handling of UPSTAT_AUTOCTS flag. Signed-off-by:
Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message] Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 71ab1c03 ] On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler. Hence if DMA submission fails, the interrupt handler should resume handling reception using PIO, else no more data is received. Make sci_submit_rx() return an error indicator, so the receive interrupt handler can act appropriately. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit dd1f2250 ] Some callers of sci_submit_rx() hold the port spinlock, others don't. During fallback to PIO, the driver needs to obtain the port spinlock. If the lock was already held, spinlock recursion is detected, causing a deadlock: BUG: spinlock recursion on CPU#0. Fix this by adding a flag parameter to sci_submit_rx() for the caller to indicate the port spinlock is already held, so spinlock recursion can be avoided. Move the spin_lock_irqsave() up, so all DMA disable steps are protected, which is safe as the recently introduced dmaengine_terminate_async() can be called in atomic context. Signed-off-by:
-
Anand Jain authored
[ Upstream commit a9261d41 ] It's not that impossible to imagine that a device OR a btrfs image is copied just by using the dd or the cp command. Which in case both the copies of the btrfs will have the same fsid. If on the system with automount enabled, the copied FS gets scanned. We have a known bug in btrfs, that we let the device path be changed after the device has been mounted. So using this loop hole the new copied device would appears as if its mounted immediately after it's been copied. For example: Initially.. /dev/mmcblk0p4 is mounted as / $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part / |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4 Copy mmcblk0 to sda $ dd if=/dev/mmcblk0 of=/dev/sda And immediately after the copy completes the change in the device superblock is notified which the automount scans using btrfs device scan and the new device sda becomes the mounted root device. $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 14.9G 0 disk |-sda4 8:4 1 4G 0 part / |-sda2 8:2 1 500M 0 part |-sda3 8:3 1 256M 0 part `-sda1 8:1 1 256M 0 part mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show / Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/sda4 The bug is quite nasty that you can't either unmount /dev/sda4 or /dev/mmcblk0p4. And the problem does not get solved until you take sda out of the system on to another system to change its fsid using the 'btrfstune -u' command. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Fabrizio Castro authored
[ Upstream commit 1d6e81a2 ] HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 0c901c05 ] Modifty the JZ4740 driver to retrieve card detect and write protect GPIO pins from GPIO descriptors instead of hard-coded global numbers. Augment the only board file using this in the process and cut down on passed in platform data. Preserve the code setting the caps2 flags for CD and WP as active low or high since the slot GPIO code currently ignores the gpiolib polarity inversion semantice and uses the raw accessors to read the GPIO lines, but set the right polarity flags in the descriptor table for jz4740. Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 0e6e7c2f ] Always check the wait condition before returning timeout. Signed-off-by:
Zhoujie Wu <zjwu@marvell.com> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 9f0ea0bd ] Always check the wait condition before returning timeout. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit ea6d0273 ] Always check the wait condition before returning timeout. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
