- 31 Oct, 2016 35 commits
-
-
Jacob Keller authored
Currently, we fail to correctly restore filters on the temporary add list when we fail to allocate memory either for deletion or addition. Replace calls to "goto out;" with calls to a new location that correctly handles memory allocation failures. Note that it is safe for us to call i40e_undo_filter_entries on the tmp_del_list even after we've deleted filters because at this point it will be empty, so we don't need to separate the logic for add and delete failure. Change-Id: Iee107fd219c6e03e2fd9645c2debf8e8384a8521 Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Replace the mac_filter_list with a static size hash table of 8bits. The primary advantage of this is a decrease in latency of operations related to searching for specific MAC filters, including .set_rx_mode. Using a linked list resulted in several locations which were O(n^2). Using a hash table should give us latency growth closer to O(n*log(n)). Change-ID: I5330bd04053b880e670210933e35830b95948ebb Signed-off-by:
-
Jacob Keller authored
When inside a loop where we call i40e_del_filter we use an O(n^2) pattern where i40e_del_filter calls i40e_find_filter for us. We can avoid this O(n^2) logic by factoring a function, __i40e_del_filter() out from the i40e_del_filter code. This allows us to re-use the delete logic where appropriate without having to search for the filter twice. This new function benefits several functions including i40e_vsi_add_vlan, i40e_vsi_kill_vlan, i40e_del_mac_vlan_all, and i40e_vsi_release. Change-ID: I75fabe0f53bf73f56b80d342e5fdcfcc28f4d3eb Signed-off-by:
-
Jacob Keller authored
When adding new MAC address filters, the driver determines if it should behave in VLAN mode (where all MAC addresses get assigned to every existing VLAN) or in non-VLAN mode where MAC addresses get assigned the VLAN_ANY identifier. Under some circumstances it is possible that a VLAN has been marked for removal (such that all filters of that VLAN are set to I40E_FILTER_REMOVE), and a subsequent call to i40e_put_mac_in_vlan may occur prior to the driver subtask that syncs filters to the hardware. In this case, we may add filters to the new removed VLAN, even though it should have been removed. This is most obvious when first adding a new VLAN. We will delete all filters which are in I40E_VLAN_ANY (-1) and then re-add them as in VLAN 0 (untagged). Then before we sync filters, we will add new MAC address filter, which will be added to every VLAN that exists. Unfortunately, this will include I40E_VLAN_ANY, so we will end up incorrectly adding filters to the -1 VLAN. This can be fixed by simply skipping all filters which are marked for removal. A similar check is not necessary in i40e_del_mac_all_vlan, since we are deleting, and any filter which we find already marked for removal would simply be deleted again, which doesn't cause any issues. Change-Id: I7962154013ce02fe950584690aeeb3ed853d0086 Signed-off-by:
-
Jacob Keller authored
When a PVID has been assigned to a VSI, the function i40e_put_mac_in_vlan arbitrarily modifies all filters to have the same VLAN. This is obviously incorrect because it could be modifying active filters without putting them into the NEW state. The correct method is to remove then re-add filters which is already done in the code where we assign the PVID. Fix this issue and a few other minor nits at the same time. First, when we have a PVID don't even bother looping and simply add the filter with the PVID immediately. In the case of the loop, we now can remove several checks. We also don't need to use i40e_find_filter first before calling i40e_add_filter, since i40e_add_filter implicitly does a lookup already. Finally, update the return semantics of this function so that on failure to add a filter it returns NULL, but on success, it returns the last filter added. Otherwise, we're just returning the last filter in the list. An alternative fix might be to return 0 or an error code, but this is pretty invasive to every call site. Change-ID: I2325dfd843aec76d89fb0d7cb0e7c4f290a34840 Signed-off-by:
-
Jacob Keller authored
A future patch will be modifying these functions and making a call to a static function which currently is defined after these functions. Move them in a separate patch to ease review and ensure the moved code is correct. Change-ID: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by:
-
Jacob Keller authored
The kernel provides __dev_uc_sync and __dev_mc_sync in order for drivers which need individual notification of add and delete for each filter. These functions allow us to vastly simplify our .set_rx_mode handler. We need to implement two functions for sync and unsync which add and remove filters respectively. This change avoids a very complex and inefficient algorithm which resulted in an abnormal latency for the .set_rx_mode NDO operation. The resulting code after this change is more readable, more efficient, and less code. Due to the callback signature used by these functions we also must update several other functions to take a const u8 * pointer. Change-Id: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by:
-
Jacob Keller authored
Originally the is_vf and is_netdev fields were added in order to distinguish between VF and netdev filters in a single VSI. However, it can be noted that we use separate VSI for SRIOV VFs and for netdev VSI. Thus, since a single VSI should only ever have one type of filter, we can simply remove the checks and remove the typing. In a similar fashion, we can note that the only remaining way to get multiple filters of a single type is through a debug command that was added to debugfs. This command is useless in practice, and results in causing bugs if we keep counter tracking but lose the is_vf and is_netdev protections as desired above. Since the only time we'd actually have a counter value besides 0 and 1 is through use of this debugfs hook, we can remove this unnecessary command, and the entire counter logic it required. We vastly simplify mac filters by removing (a) the distinction between VF and netdev filters (b) counting logic (c) the ability to add and remove filters bypassing the stack via debugfs Change-ID: Idf916dd2a1159b1188ddbab5bef6b85ea6bf27d9 Signed-off-by:
-
Colin Ian King authored
Trival fix, dev_err message is missing a \n, so add it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Tested-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: add support for PIM hello router ports The first 3 patches of this set do minor cleanups and add some helpers to the PIM header file. Patch 4 adds a way to detect mcast router ports via PIM hello messages, they're marked as temporary and are not considered for querier. There's more detailed information in patch 4's commit message. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When we receive a PIM Hello message on a port we can consider that it has a multicast router attached, thus it is correct to add it to the router list. The only catch is it shouldn't be considered for a querier. Using Daniel's description: leaf-11 leaf-12 leaf-13 \ | / bridge-1 / \ host-11 host-12 - all ports in bridge-1 are in a single vlan aware bridge - leaf-11 is the IGMP querier - leaf-13 is the PIM DR - host-11 TXes packets to 226.10.10.10 - bridge-1 only forwards the 226.10.10.10 traffic out the port to leaf-11, it should also forward this traffic out the port to leaf-13 Suggested-by:Daniel Walton <dwalton@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Signed-off-by:
-
Nikolay Aleksandrov authored
Signed-off-by:
-
Nikolay Aleksandrov authored
Add the common pimhdr structure and helpers to access it, also cleanup the format of the header file. Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Patch series This series does several things. The bigger changes: - Add new notification APIs [& Defaults] for various fields. The series then utilizes some of those qed <-> qede APIs to bass WoL support upon. - Change the resource allocation scheme to receive the values from management firmware, instead of equally sharing resources between functions [that might not need those]. That would, e.g., allow us to configure additional filters to network interfaces in presence of storage [PCI] functions from same adapter. ==================== Signed-off-by: -
Tomer Tayar authored
Currently, each interfaces assumes it receives an equal portion of HW/FW resources, but this is wasteful - different partitions [and specifically, parititions exposing different protocol support] might require different resources. Implement a new resource learning scheme where the information is received directly from the management firmware [which has knowledge of all of the functions and can serve as arbiter]. Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
Driver sets several restrictions about the number of supported VFs according to available HW/FW resources. This creates a problem as there are constellations which can't be supported [as limitation don't accurately describe the resources], as well as holes where enabling IOV would fail due to supposed lack of resources. This introduces a new interal feature - vf-queues, which would be used to lift some of the restriction and accurately enumerate the queues that can be used by a given PF's VFs. Signed-off-by:
-
Mintz, Yuval authored
Today, RDMA capabilities are learned from management firmware which provides a per-device indication for all interfaces. Newer management firmware is capable of providing a per-device indication [would later be extended to either RoCE/iWARP]. Try using this newer learning mechanism, but fallback in case management firmware is too old to retain current functionality. Signed-off-by:
-
Mintz, Yuval authored
While the qed_lm_maps is closely tied with the QED_LM_* defines, when iterating over the array use actual size instead of the qed define to prevent future possible issues. Signed-off-by:
-
Mintz, Yuval authored
Signed-off-by:
-
Mintz, Yuval authored
Signed-off-by:
-
Sudarsana Kalluru authored
Management firmware is interested in various tidbits about the driver - including the driver state & several configuration related fields [MTU, primtary MAC, etc.]. This adds the necessray logic to update MFW with such configurations, some of which are passed directly via qed while for others APIs are provide so that qede would be able to later configure if needed. This also introduces a new default configuration for MTU which would replace the default inherited by being an ethernet device. Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Julia Lawall authored
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Use DEVICE_ATTR_RO for read only attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @ro@ declarer name DEVICE_ATTR; identifier x,x_show; @@ DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); @script:ocaml@ x << ro.x; x_show << ro.x_show; @@ if not (x^"_show" = x_show) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RO; identifier ro.x,ro.x_show; @@ - DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); + DEVICE_ATTR_RO(x); // </smpl> Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
While commit bb35a6ef ("bpf, inode: allow for rename and link ops") added support for hard links that can be used for prog and map nodes, this work adds simple symlink support, which can be used f.e. for directories also when unpriviledged and works with cmdline tooling that understands S_IFLNK anyway. Since the switch in e27f4a94 ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), there can be various mount instances with mount_nodev() and thus hierarchy can be flattened to facilitate object sharing. Thus, we can keep bpf tooling also working by repointing paths. Most of the functionality can be used from vfs library operations. The symlink is stored in the inode itself, that is in i_link, which is sufficient in our case as opposed to storing it in the page cache. While at it, I noticed that bpf_mkdir() and bpf_mkobj() don't update the directories mtime and ctime, so add a common helper for it called bpf_dentry_finalize() that takes care of it for all cases now. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Aaron Young authored
The following patch fixes an issue with the ldmvsw driver where the network connection of a guest domain becomes non-functional after the guest domain has panic'd and rebooted. The root cause was determined to be from the following series of events: 1. Guest domain panics - resulting in the guest no longer processing network packets (from ldmvsw driver) 2. The ldmvsw driver (in the control domain) eventually exerts flow control due to no more available tx drings and stops the tx queue for the guest domain 3. The LDC of the network connection for the guest is reset when the guest domain reboots after the panic. 4. The LDC reset event is received by the ldmvsw driver and the ldmvsw responds by clearing the tx queue for the guest. 5. ldmvsw waits indefinitely for a DATA ACK from the guest - which is the normal method to re-enable the tx queue. But the ACK never comes because the tx queue was cleared due to the LDC reset. To fix this issue, in addition to clearing the tx queue, re-enable the tx queue on a LDC reset. This prevents the ldmvsw from getting caught in this deadlocked state of waiting for a DATA ACK which will never come. Signed-off-by:
Aaron Young <Aaron.Young@oracle.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
David S. Miller authored
Alexander Duyck says: ==================== Add support for XPS when using DCB This patch series enables proper isolation between traffic classes when using XPS while DCB is enabled. Previously enabling XPS would cause the traffic to be potentially pulled from one traffic class into another on egress. This change essentially multiplies the XPS map by the number of traffic classes and allows us to do a lookup per traffic class for a given CPU. To guarantee the isolation I invalidate the XPS map for any queues that are moved from one traffic class to another, or if we change the number of traffic classes. v2: Added sysfs to display traffic class Replaced do/while with for loop Cleaned up several other for for loops throughout the patch ==================== Signed-off-by: -
Alexander Duyck authored
This patch adds support for setting and using XPS when QoS via traffic classes is enabled. With this change we will factor in the priority and traffic class mapping of the packet and use that information to correctly select the queue. This allows us to define a set of queues for a given traffic class via mqprio and then configure the XPS mapping for those queues so that the traffic flows can avoid head-of-line blocking between the individual CPUs if so desired. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch updates the code for removing queues from the XPS map and makes it so that we can apply the code any time we change either the number of traffic classes or the mapping of a given block of queues. This way we avoid having queues pulling traffic from a foreign traffic class. Signed-off-by:
-
Alexander Duyck authored
Add a sysfs attribute for a Tx queue that allows us to determine the traffic class for a given queue. This will allow us to more easily determine this in the future. It is needed as XPS will take the traffic class for a group of queues into account in order to avoid pulling traffic from one traffic class into another. Signed-off-by:
-
Alexander Duyck authored
The functions for configuring the traffic class to queue mappings have other effects that need to be addressed. Instead of trying to export a bunch of new functions just relocate the functions so that we can instrument them directly with the functionality they will need. Signed-off-by:
-
Gao Feng authored
The current codes use _IOC_TYPE(cmd) == 0x89 to check if the cmd is one socket ioctl command like SIOCGIFHWADDR. But the literal number 0x89 may confuse readers. So create one macro SOCK_IOC_TYPE to enhance the readability. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Andrey Vagin authored
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
David S. Miller authored
The second SET_NETDEV_DEV() in the hunk should be removed. Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
One merge conflict block wasn't resolved. Reported-by:
-
- 30 Oct, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdmaDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox mlx5 core driver updates 2016-10-25 This series contains some updates and fixes of mlx5 core and IB drivers with the addition of two features that demand new low level commands and infrastructure updates. - SRIOV VF max rate limit support - mlx5e tc support for FWD rules with counter. Needed for both net and rdma subsystems. Updates and Fixes: From Saeed Mahameed (2): - mlx5 IB: Skip handling unknown mlx5 events - Add ConnectX-5 PCIe 4.0 VF device ID From Artemy Kovalyov (2): - Update struct mlx5_ifc_xrqc_bits - Ensure SRQ physical address structure endianness From Eugenia Emantayev (1): - Fix length of async_event_mask New Features: From Mohamad Haj Yahia (3): mlx5 SRIOV VF max rate limit support - Introduce TSAR manipulation firmware commands - Introduce E-switch QoS management - Add SRIOV VF max rate configuration support From Mark Bloch (7): mlx5e Tc support for FWD rule with counter - Don't unlock fte while still using it - Use fte status to decide on firmware command - Refactor find_flow_rule - Group similar rules under the same fte - Add multi dest support - Add option to add fwd rule with counter - mlx5e tc support for FWD rule with counter Mark here fixed two trivial issues with the flow steering core, and did some refactoring in the flow steering API to support adding mulit destination rules to the same hardware flow table entry at once. In the last two patches added the ability to populate a flow rule with a flow counter to the same flow entry. V2: Dropped some patches that added new structures without adding any usage of them. Added SRIOV VF max rate configuration support patch that introduces the usage of the TSAR infrastructure. Added flow steering fixes and refactoring in addition to mlx5 tc support for forward rule with counter. ==================== Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Add Infiniband support for Mellanox switches This patchset adds basic Infiniband support for SwitchX-2, Switch-IB and Switch-IB-2 ASIC drivers. SwitchX-2 ASIC is VPI capable, which means each port can be either Ethernet or Infiniband. When the port is configured as Infiniband, the Subnet Management Agent (SMA) is managed by the SwitchX-2 firmware and not by the host. Port configuration, MTU and more are configured remotely by the Subnet Manager (SM). Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Switch-IB (FDR) and Switch-IB-2 (EDR 100Gbs) ASICs are Infiniband-only switches. The support provided in the mlxsw_switchib.ko driver is port initialization only. The firmware running in the Silicon implements the SMA. Please note that this patchset does only very basic port initialization. ib_device or RDMA implementations are not part of this patchset. ==================== Signed-off-by: -
Elad Raz authored
SwitchIB and SwitchIB-2 are Infiniband switches with up to 36 ports. This driver initialize the hardware and Firmware which implements the IB management and connection with the SM. Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Elad Raz authored
SwitchX-2 is IB capable device. This patch add a support to change the port type between Ethernet and Infiniband. When the port is set to IB, the FW implements the Subnet Management Agent (SMA) manage the port. All port attributes can be control remotely by the SM. Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Signed-off-by:
-
