Only default BLK_DEV_IDEDMA on BLK_DEV_IDEDMA_ICS if ARCH_ACORN is
set, not if ARM is set.  There are PCI ARM systems out there!

Ensure that we clean up properly after initialisation error,
releasing all claimed resources in an orderly manner and
returning the correct error code.

Add cfbfillrect / cfbcopyarea / cfbimgblt objects for SA1100fb.
Remove redundant "pm" member.

The current LOG_BUF size is a bit confusing the first
time that "make oldconfig" is used.  It's difficult to
select anything other than the default value.

Also, you (Linus) expressed a desire to have this
configurable only if DEBUG_KERNEL or "kernel hacking"
was enabled, so I've changed it to accomplish that.

This patch also uses Kconfig in a way that Roman intended
since a patch in 2.5.52 which enables default values if
a prompt is not enabled, but lets values be chosen when
the prompt is enabled.  You also asked for this in setting
this config option.

into home.transmeta.com:/home/torvalds/v2.5/linux

This provides for separate global and per-thread debug control
register value(s), which are switched as appropriate.  This allows
us to use both an external JTAG debugger for debugging the kernel
as well as using gdb to debug user programs.

This is needed for Open Firmware on older powermacs to be able to
load the wrapper.  Without this OF gives a "CLAIM failed" error.

device model.

into samba.org:/home/paulus/kernel/for-linus-ppc

probing tells us they already have a range. The old information is
stale.

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-core

Some error checking was added ca. 2.5.58 that would remove a device from 
its bus's list of devices if device_attach() returned an error. This 
included errors returned from drv->probe(), and the -ENODEV error returned
if the device wasn't bound to any driver.

This was BAD since it was perfectly fine for a device not to bind to a 
driver immediately, and for drivers to return an error on probe() if the 
device doesn't exactly qualify as one it supports. 

This changes device_attach() and driver_attach() to both return void, 
instead of an error, since they really can never fail hard enough to cause
the device or driver to be removed from the bus. 

a condensed version.

multiple times under certain circumstances.

This fixes svc_tcp_recvfrom().

Found by Ted Phelps <phelps@dstc.edu.au>

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

The pci_enable_device() function will fail at least on i386 (see
arch/i386/pci/i386.c: pcibios_enable_resource (line 260)) if the
resources have not been assigned previously.  Hence the ostensible
resource collisions.

I added a small comment (and modified another) so future janitors won't
move pci_enable above pci_assign_resource again.

Here are some minor fixes and cleanups to the cpia (Creative WebCam II et
al) driver.  These have been extracted from the sourceforge CVS archive,
and I'd like to get these in before a larger change to the parallel port
code to support more transfer modes.

This patch contains:
  * cpia: use the <linux/list.h> list implementation, instead of cpia specific
    version.
  * cpia_pp: don't clear camera list after cameras have been registered (as
    this prevents them being deregistered, and oops after module
    unload).
  * hold cpia_pp list spinlock while walking list, not just during the
    element removal.

into tetrachloride.(none):/mnt/stuff/kernel/2.5/agpgart

into tetrachloride.(none):/mnt/stuff/kernel/2.5/agpgart

into kroah.com:/home/linux/linux/BK/gregkh-2.5

  speedtouch: use SpeedTouch everywhere (was sometimes Speed Touch).

  speedtouch: make more functions static.

  speedtouch: kill receive queue tasklet on shutdown (race pointed
out by Oliver Neukum).

Current uses of the urb_list have all been to make
sure we have some list of pending urbs, so we can
clean them all up after HCs die, and avoid trying
to unlink something that's not actually linked.
So order hasn't mattered.

This makes the order be FIFO, which is more useful
for other purposes.  Like being the HCD's internal
schedule, or dumping for debug.

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-core

sys_quotacl tries to do a get_super on a struct block_device * to which
it doesn't hold a reference (nor does it actually have to be non-NULL).

As lookup bdev by name is a rather common operation I splitted out a new
helper, lookup_bdev() that does this out of open_bdev_excl and switched
quota.c to use it.  lookup_bdev() holds a proper reference that needs
to be dropped by bdput(), and it's well documented.

The use of umode_t instead of devfs-specific char vs block #defines
in Adam's mini-devfs patch makes sense independant of whether his patch
should get merged.  While reviewing his changes I also notices that
most of the number allocation functionality in devfs has no business
beeing exported.  In addition I cleaned up devfs_alloc_devnum/
devfs_dealloc_devnum a bit.

It's simply not needed anymore in 2.5