- 23 Sep, 2009 11 commits
-
-
Wey-Yi Guy authored
We can not assume antenna "A" is the first valid anttena for all the NIC. Need to make sure choice the correct antenna based on h/w configuration for transmit to avoid sending frame on invalid antenna Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
RX handling maintains a few lists that keep track of the RX buffers. Buffers move from one list to the other as they are used, replenished, and again made available for usage. In one such instance, when a buffer is used it enters the "rx_used" list. When buffers are replenished an skb is attached to the buffer and it is moved to the "rx_free" list. The problem here is that the buffer is first removed from the "rx_used" list _before_ the skb is allocated. Thus, if the skb allocation fails this buffer remains removed from the "rx_used" list and is thus lost for future usage. Fix this by first allocating the skb before trying to attach it to a list. We add an additional check to not do this unnecessarily. Reported-by: Rick Farrington <rickdic@hotmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Daniel C Halperin authored
When we cleaned up the driver to properly tell mac80211 about HT rates ("iwlwifi: use iwl_hwrate_get_mac80211_idx where appropriate"), we broke internal rate indexing in 2.4 GHz band. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Tested-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
Disable SDIO coreswitch debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Holger Schurig authored
WEXT's "struct iw_freq" can also be used to handle a channel. This patch now uses cfg80211_wext_freq() instead of hand-converting the frequency. That allows user-space to specify channels as well, like with SIOCSIWFREQ. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
When processing MIB interrupts, OFDM and CCK error handling routines for low RSSI values have to be invoked only when the channel mode is 11G/11B. Since HT channels will also fall under the bands 2Ghz/5Ghz, check appropriately. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
Force wake the mac80211 queues on init. Under rare circumstances they may be stopped, if a DMA error or something else causes a device reset while a queue was stopped. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Martin Decky authored
As the hostap driver was converted to use net_device_ops, a mistake was made in hostap_main.c (commit 5ae4efbc). Originally, the tx_queue_len was set to 0 for every other interface than HOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to 0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous behavior makes the driver to drop all packets in AP mode. Change the way 0 is assigned to tx_queue_len according to the original logic. Signed-off-by: Martin Decky <martin@decky.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 14 Sep, 2009 29 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'osync_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: fsync: wait for data writeout completion before calling ->fsync vfs: Remove generic_osync_inode() and sync_page_range{_nolock}() fat: Opencode sync_page_range_nolock() pohmelfs: Use new syncing helper xfs: Convert sync_page_range() to simple filemap_write_and_wait_range() ocfs2: Update syncing after splicing to match generic version ntfs: Use new syncing helpers and update comments ext4: Remove syncing logic from ext4_file_write ext3: Remove syncing logic from ext3_file_write ext2: Update comment about generic_osync_inode vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode vfs: Rename generic_file_aio_write_nolock ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write() vfs: Export __generic_file_aio_write() and add some comments vfs: Introduce filemap_fdatawait_range
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: GFS2: Whitespace fixes GFS2: Remove unused sysfs file GFS2: Be extra careful about deallocating inodes GFS2: Remove no_formal_ino generating code GFS2: Rename eattr.[ch] as xattr.[ch] GFS2: Clean up of extended attribute support GFS2: Add explanation of extended attr on-disk format GFS2: Add "-o errors=panic|withdraw" mount options GFS2: jumping to wrong label? GFS2: free disk inode which is deleted by remote node -V2 GFS2: Add a document explaining GFS2's uevents GFS2: Add sysfs link to device GFS2: Replace assertion with proper error handling GFS2: Improve error handling in inode allocation GFS2: Add some more info to uevents GFS2: Add online uevent to GFS2
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Fix possible corruption when close races with write udf: Perform preallocation only for regular files udf: Remove wrong assignment in udf_symlink udf: Remove dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (21 commits) fs/Kconfig: move nilfs2 outside misc filesystems nilfs2: convert nilfs_bmap_lookup to an inline function nilfs2: allow btree code to directly call dat operations nilfs2: add update functions of virtual block address to dat nilfs2: remove individual gfp constants for each metadata file nilfs2: stop zero-fill of btree path just before free it nilfs2: remove unused btree argument from btree functions nilfs2: remove nilfs_dat_abort_start and nilfs_dat_abort_free nilfs2: shorten freeze period due to GC in write operation v3 nilfs2: add more check routines in mount process nilfs2: An unassigned variable is assigned to a never used structure member nilfs2: use GFP_NOIO for bio_alloc instead of GFP_NOWAIT nilfs2: stop using periodic write_super callback nilfs2: clean up nilfs_write_super nilfs2: fix disorder of nilfs_write_super in nilfs_sync_fs nilfs2: remove redundant super block commit nilfs2: implement nilfs_show_options to display mount options in /proc/mounts nilfs2: always lookup disk block address before reading metadata block nilfs2: use semaphore to protect pointer to a writable FS-instance nilfs2: fix format string compile warning (ino_t) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: consolidate reconnect logic in smb_init routines cifs: Replace wrtPending with a real reference count cifs: protect GlobalOplock_Q with its own spinlock cifs: use tcon pointer in cifs_show_options cifs: send IPv6 addr in upcall with colon delimiters [CIFS] Fix checkpatch warnings PATCH] cifs: fix broken mounts when a SSH tunnel is used (try #4) [CIFS] Memory leak in ntlmv2 hash calculation [CIFS] potential NULL dereference in parse_DFS_referrals()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (21 commits) sparc64: Initial niagara2 perf counter support. sparc64: Perf counter 'nop' event is not constant. sparc64: Provide a way to specify a perf counter overflow IRQ enable bit. sparc64: Provide hypervisor tracing bit support for perf counters. sparc64: Initial hw perf counter support. sparc64: Implement a real set_perf_counter_pending(). sparc64: Use nmi_enter() and nmi_exit(), as needed. sparc64: Provide extern decls for sparc_??u_type strings. sparc64: Make touch_nmi_watchdog() actually work. sparc64: Kill unnecessary cast in profile_timer_exceptions_notify(). sparc64: Manage NMI watchdog enabling like x86. sparc: add basic support for 'perf' sparc: convert /proc/io_map, /proc/dvma_map to seq_file sparc, leon: sparc-leon specific SRMMU initialization and bootup fixes. sparc,leon: Added support for AMBAPP bus. sparc,leon: Introduce the sparc-leon CPU type. sparc,leon: Redefine MMU register access asi if CONFIG_LEON sparc,leon: CONFIG_SPARC_LEON option and leon specific files. sparc64: cheaper asm/uaccess.h inclusion SPARC: fix duplicate declaration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: split __phys_addr out into separate file xen: use stronger barrier after unlocking lock xen: only enable interrupts while actually blocking for spinlock xen: make -fstack-protector work under Xen
-
Jan Kara authored
When we close a file, we remove preallocated blocks from it. But this truncation was not protected by i_mutex and thus it could have raced with a write through a different fd and cause crashes or even filesystem corruption. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
So far we preallocated blocks also for directories but that brings a problem, when to get rid of preallocated blocks we don't need. So far we removed them in udf_clear_inode() which has a disadvantage that 1) blocks are unavailable long after writing to a directory finished and thus one can get out of space unnecessarily early 2) releasing blocks from udf_clear_inode is problematic because VFS does not expect us to redirty inode there and it also slows down memory reclaim. So preallocate blocks only for regular files where we can drop preallocation in udf_release_file. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Recomputation of the pointer was wrong (it should have been just increment). Luckily, we never use the computed value. Remove it. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Remove code that gets never used. Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
Currenly vfs_fsync(_range) first calls filemap_fdatawrite to write out the data, the calls into ->fsync to write out the metadata and then finally calls filemap_fdatawait to wait for the data I/O to complete. What sounds like a clever micro-optimization actually is nast trap for many filesystems. For many modern filesystems i_size or other inode information is only updated on I/O completion and we need to wait for I/O to finish before we can write out the metadata. For old fashionen filesystems that instanciate blocks during the actual write and also update the metadata at that point it opens up a large window were we could expose uninitialized blocks after a crash. While a few filesystems that need it already wait for the I/O to finish inside their ->fsync methods it is rather suboptimal as it is done under the i_mutex and also always for the whole file instead of just a part as we could do for O_SYNC handling. Here is a small audit of all fsync instances in the tree: - spufs_mfc_fsync: - ps3flash_fsync: - vol_cdev_fsync: - printer_fsync: - fb_deferred_io_fsync: - bad_file_fsync: - simple_sync_file: don't care - filesystems/drivers do't use the page cache or are purely in-memory. - simple_fsync: - file_fsync: - affs_file_fsync: - fat_file_fsync: - jfs_fsync: - ubifs_fsync: - reiserfs_dir_fsync: - reiserfs_sync_file: never touch pagecache themselves. We need to wait before if we do not want to expose stale data after an allocation. - afs_fsync: - fuse_fsync_common: do the waiting writeback itself in awkward ways, would benefit from proper semantics - block_fsync: Does a filemap_write_and_wait on the block device inode. Because we now have f_mapping that is the same inode we call it on in vfs_fsync. So just removing it and letting the VFS do the work in one go would be an improvement. - btrfs_sync_file: - cifs_fsync: - xfs_file_fsync: need the wait first and currently do it themselves. would benefit from doing it outside i_mutex. - coda_fsync: - ecryptfs_fsync: - exofs_file_fsync: - shm_fsync: only passes the fsync through to the lower layer - ext3_sync_file: doesn't seem to care, comments are confusing. - ext4_sync_file: would need the wait to work correctly for delalloc mode with late i_size updates. Otherwise the ext3 comment applies. currently implemens it's own writeback and wait in an odd way, could benefit from doing it properly. - gfs2_fsync: not needed for journaled data mode, but probably harmless there. Currently writes back data asynchronously itself. Needs some major audit. - hostfs_fsync: just calls fsync/datasync on the host FD. Without the wait before data might not even be inflight yet if we're unlucky. - hpfs_file_fsync: - ncp_fsync: no-ops. Dangerous before and after. - jffs2_fsync: just calls jffs2_flush_wbuf_gc, not sure how this relates to data. - nfs_fsync_dir: just increments stats, claims all directory operations are synchronous - nfs_file_fsync: only writes out data??? Looks very odd. - nilfs_sync_file: looks like it expects all data done, but not sure from the code - ntfs_dir_fsync: - ntfs_file_fsync: appear to do their own data writeback. Very convoluted code. - ocfs2_sync_file: does it's own data writeback, but no wait. probably needs the wait. - smb_fsync: according to a comment expects all pages written already, probably needs the wait before. This patch only changes vfs_fsync_range, removal of the wait in the methods that have it is left to the filesystem maintainers. Note that most filesystems really do need an audit for their fsync methods given the gems found in this very brief audit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Remove these three functions since nobody uses them anymore. Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
fat_cont_expand() is the only user of sync_page_range_nolock(). It's also the only user of generic_osync_inode() which does not have a file open. So opencode needed actions for FAT so that we can convert generic_osync_inode() to a standard syncing path. Update a comment about generic_osync_inode(). CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use new generic_write_sync() helper instead of sync_page_range(). Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Christoph Hellwig says that it is enough for XFS to call filemap_write_and_wait_range() instead of sync_page_range() because we do all the metadata syncing when forcing the log. CC: Felix Blyakher <felixb@sgi.com> CC: xfs@oss.sgi.com CC: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Update ocfs2 specific splicing code to use generic syncing helper. The sync now does not happen under rw_lock because generic_write_sync() acquires i_mutex which ranks above rw_lock. That should not matter because standard fsync path does not hold it either. Acked-by: Joel Becker <Joel.Becker@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> CC: ocfs2-devel@oss.oracle.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use new syncing helpers in .write and .aio_write functions. Also remove superfluous syncing in ntfs_file_buffered_write() and update comments about generic_osync_inode(). CC: Anton Altaparmakov <aia21@cantab.net> CC: linux-ntfs-dev@lists.sourceforge.net Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
The syncing is now properly handled by generic_file_aio_write() so no special ext4 code is needed. CC: linux-ext4@vger.kernel.org CC: tytso@mit.edu Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Syncing is now properly done by generic_file_aio_write() so no special logic is needed in ext3. CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
We rely on generic_write_sync() now. CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Introduce new function for generic inode syncing (vfs_fsync_range) and use it from fsync() path. Introduce also new helper for syncing after a sync write (generic_write_sync) using the generic function. Use these new helpers for syncing from generic VFS functions. This makes O_SYNC writes to block devices acquire i_mutex for syncing. If we really care about this, we can make block_fsync() drop the i_mutex and reacquire it before it returns. CC: Evgeniy Polyakov <zbr@ioremap.net> CC: ocfs2-devel@oss.oracle.com CC: Joel Becker <joel.becker@oracle.com> CC: Felix Blyakher <felixb@sgi.com> CC: xfs@oss.sgi.com CC: Anton Altaparmakov <aia21@cantab.net> CC: linux-ntfs-dev@lists.sourceforge.net CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> CC: linux-ext4@vger.kernel.org CC: tytso@mit.edu Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Christoph Hellwig authored
generic_file_aio_write_nolock() is now used only by block devices and raw character device. Filesystems should use __generic_file_aio_write() in case generic_file_aio_write() doesn't suit them. So rename the function to blkdev_aio_write() and move it to fs/blockdev.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use the new helper. We have to submit data pages ourselves in case of O_SYNC write because __generic_file_aio_write does not do it for us. OCFS2 developpers might think about moving the sync out of i_mutex which seems to be easily possible but that's out of scope of this patch. CC: ocfs2-devel@oss.oracle.com Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Use new helper __generic_file_aio_write(). Since the fs takes care of syncing by itself afterwards, there are no more changes needed. CC: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
generic_file_direct_write() and generic_file_buffered_write() called generic_osync_inode() if it was called on O_SYNC file or IS_SYNC inode. But this is superfluous since generic_file_aio_write() does the syncing as well. Also XFS and OCFS2 which call these functions directly handle syncing themselves. So let's have a single place where syncing happens: generic_file_aio_write(). We slightly change the behavior by syncing only the range of file to which the write happened for buffered writes but that should be all that is required. CC: ocfs2-devel@oss.oracle.com CC: Joel Becker <joel.becker@oracle.com> CC: Felix Blyakher <felixb@sgi.com> CC: xfs@oss.sgi.com Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add comments to write helpers explaining how they should be used and export __generic_file_aio_write() since it will be used by some filesystems. CC: ocfs2-devel@oss.oracle.com CC: Joel Becker <joel.becker@oracle.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-
Jan Kara authored
This simple helper saves some filesystems conversion from byte offset to page numbers and also makes the fdata* interface more complete. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
-