- 17 Jun, 2009 40 commits
-
-
Ricardo Labiaga authored
Contains prototype for backchannel helper routines. Signed-off-by:
Ricardo Labiaga <ricardo.labiaga@netapp.com> Signed-off-by:
Benny Halevy <bhalevy@panasas.com> [nfs41: xprt_setup_backchannel v4.0 only inline] Fix compile error when CONFIG_NFS_V4_1 is not set. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Ricardo Labiaga authored
This patch introduces support to setup the callback xprt on the client side. It allocates/ destroys the preallocated memory structures used to process backchannel requests. At setup time, xprt_setup_backchannel() is invoked to allocate one or more rpc_rqst structures and substructures. This ensures that they are available when an RPC callback arrives. The rpc_rqst structures are maintained in a linked list attached to the rpc_xprt structure. We keep track of the number of allocations so that they can be correctly removed when the channel is destroyed. When an RPC callback arrives, xprt_alloc_bc_request() is invoked to obtain a preallocated rpc_rqst structure. An rpc_xprt structure is returned, and its RPC_BC_PREALLOC_IN_USE bit is set in rpc_xprt->bc_flags. The structure is removed from the the list since it is now in use, and it will be later added back when its user is done with it. After the RPC callback replies, the rpc_rqst structure is returned by invoking xprt_free_bc_request(). This clears the RPC_BC_PREALLOC_IN_USE bit and adds it back to the list, allowing it to be reused by a subsequent RPC callback request. To be consistent with the reception of RPC messages, the backchannel requests should be placed into the 'struct rpc_rqst' rq_rcv_buf, which is then in turn copied to the 'struct rpc_rqst' rq_private_buf. [nfs41: Preallocate rpc_rqst receive buffer for handling callbacks] Signed-off-by:
-
Ricardo Labiaga authored
Signed-off-by:
-
Ricardo Labiaga authored
Adds new list of rpc_xprt structures, and a readers/writers lock to protect the list. The list is used to preallocate resources for the backchannel during backchannel requests. Callbacks are not expected to cause significant latency, so only one callback will be allowed at this time. It also adds a pointer to the NFS callback service so that requests can be directed to it for processing. New callback members added to svc_serv. The NFSv4.1 callback service will sleep on the svc_serv->svc_cb_waitq until new callback requests arrive. The request will be queued in svc_serv->svc_cb_list. This patch adds this list, the sleep queue and spinlock to svc_serv. [nfs41: NFSv4.1 callback support] Signed-off-by:
-
Benny Halevy authored
move nfs4_init_callback into nfs4_init_client_minor_version and nfs4_destroy_callback into nfs4_clear_client_minor_version as these need to happen also when auto-negotiating the minorversion once the callback service for nfs41 becomes different than for nfs4.0 Signed-off-by:
-
Benny Halevy authored
Refactor-out code to bring the callback service up and down. Signed-off-by: -
Ricardo Labiaga authored
Reading and storing the RPC direction is a three step process. 1. xs_tcp_read_calldir() reads the RPC direction, but it will not store it in the XDR buffer since the 'struct rpc_rqst' is not yet available. 2. The 'struct rpc_rqst' is obtained during the TCP_RCV_COPY_DATA state. This state need not necessarily be preceeded by the TCP_RCV_READ_CALLDIR. For example, we may be reading a continuation packet to a large reply. Therefore, we can't simply obtain the 'struct rpc_rqst' during the TCP_RCV_READ_CALLDIR state and assume it's available during TCP_RCV_COPY_DATA. This patch adds a new TCP_RCV_READ_CALLDIR flag to indicate the need to read the RPC direction. It then uses TCP_RCV_COPY_CALLDIR to indicate the RPC direction needs to be saved after the 'struct rpc_rqst' has been allocated. 3. The 'struct rpc_rqst' is obtained by the xs_tcp_read_data() helper functions. xs_tcp_read_common() then saves the RPC direction in the XDR buffer if TCP_RCV_COPY_CALLDIR is set. This will happen when we're reading the data immediately after the direction was read. xs_tcp_read_common() then clears this flag. [was nfs41: Skip past the RPC call direction] Signed-off-by:
-
Ricardo Labiaga authored
NFSv4.1 callbacks can arrive over an existing connection. This patch adds the logic to read the RPC call direction (call or reply). It does this by updating the state machine to look for the call direction invoking xs_tcp_read_calldir(...) after reading the XID. [nfs41: Keep track of RPC call/reply direction with a flag] As per 11/14/08 review of RFC 53/85. Add a new flag to track whether the incoming message is an RPC call or an RPC reply. TCP_RPC_REPLY is set in the 'struct sock_xprt' tcp_flags in xs_tcp_read_calldir() if the message is an RPC reply sent on the forechannel. It is cleared if the message is an RPC request sent on the back channel. Signed-off-by:
-
Benny Halevy authored
Unlike minorversion0, in nfsv4.1 the open and lock seqids need not be incremented by the client and should always be set to zero. This is implemented using a new nfs_rpc_ops methods - increment_open_seqid and increment_lock_seqid Signed-off-by:
Rahul Iyer <iyer@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Stops an infinite loop of EXCHANGE_ID. Signed-off-by:
-
Benny Halevy authored
This creates the nfsv4.1 session on mount. Signed-off-by:
-
Andy Adamson authored
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search for credentials other than the machine credential. Signed-off-by:
-
Andy Adamson authored
EXCHANGE_ID has different credential requirements than SETCLIENTID. Prepare for a separate credential function. Signed-off-by:
-
Andy Adamson authored
nfsv4.1 clientid is established via EXCHANGE_ID rather than SETCLIENTID{,_CONFIRM} This is implemented using a new establish_clid method in nfs4_state_recovery_ops. nfs41: establish clientid via exchange id only if cred != NULL >From 2.6.26 reclaimer() uses machine cred for setting up the client id therefore it is never expected to be NULL. Signed-off-by: -
Andy Adamson authored
Use the machine cred for sending SEQUENCE to renew the client's lease. [revamp patch for new state management design starting 2.6.29] [nfs41: support minorversion 1 for nfs4_check_lease] Signed-off-by:
-
Benny Halevy authored
[moved nfs4_get_renew_cred related changes to "nfs41: introduce get_state_renewal_cred"] Signed-off-by:
-
Benny Halevy authored
Send a NFSv4.1 SEQUENCE op rather than RENEW that was deprecated in minorversion 1. Use the nfs_client minorversion to select reboot_recover/ network_partition_recovery/state_renewal ops. Note: we use reclaimer to create the nfs41 session before there are any cl_superblocks for the nfs_client. Signed-off-by:
-
Andy Adamson authored
Define a new session reset state which is set upon a sequence operation error in both the sync and async error handlers. Place all new requests and all but the last outstanding rpc on the slot_tbl_waitq. Spawn the recovery thread when the last slot is free. Call nfs4_proc_destroy_session, reinitialize the session, call nfs4_proc_create_session, clear the session reset state, and wake up the next task on the slot_tbl_waitq. Return the nfs4_proc_destroy_session status to the session reclaimer and check for NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION. Other destroy session errors should be handled in nfs4_proc_destroy_session where the call can be retried with adjusted arguments. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Remove checking for any errors that the SEQUENCE operation does not return. -NFS4ERR_STALE_CLIENTID, NFS4ERR_EXPIRED, NFS4ERR_CB_PATH_DOWN, NFS4ERR_BACK_CHAN_BUSY, NFS4ERR_OP_NOT_IN_SESSION. SEQUENCE operation error recovery is very primative, we only reset the session. Remove checking for any errors that are returned by the SEQUENCE operation, but that resetting the session won't address. NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS,NFS4ERR_TOO_MANY_OPS. Add error checking for missing SEQUENCE errors that a session reset will address. NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_DEADSESSION, NFS4ERR_SEQ_FALSE_RETRY. A reset of the session is currently our only response to a SEQUENCE operation error. Don't reset the session on errors where a new session won't help. Don't reset the session on errors where a new session won't help. [nfs41: nfs4_async_handle_error update error checking] Signed-off-by:
-
Andy Adamson authored
[nfs41: change nfs4_restart_rpc argument] [nfs41: check for session not minorversion] [nfs41: trigger the state manager for session reset] Signed-off-by:
-
Andy Adamson authored
Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Move the code to reset a session from the session_reclaimer to the nfs4_state_manager. Destroy the session, and create a new one. Treat NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION as a successful nfs4_proc_destroy_session. Signal nfs4_proc_create_session that this is a session reset so that the session slot table is re-used. If the clientid is stale, set both NFS4CLNT_LEASE_EXPIRED and NFS4CLNT_SESSION_SETUP bits and retry. Use a switch statement in nfs4_session_recovery_handle_error for future patche which will add handling for other errors. Signed-off-by:
-
Andy Adamson authored
At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules the nfs4_state_manager and waits for it to complete. Place the session setup after the clientid establishment in nfs4_state_manager so that the session is setup right after the clientid has been established without rescheduling the state manager. Unlike nfsv4.0, the nfs_client struct is not ready to use until the session has been established. Postpone marking the nfs_client struct to NFS_CS_READY until after a successful CREATE_SESSION call so that other threads cannot use the client until the session is established. If the EXCHANGE_ID call fails and the session has not been setup (the NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return. If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID which could occur due to server reboot or network partition inbetween the EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and NFS4CLNT_SESSION_SETUP bits and try again. If the CREATE_SESSION call fails with other errors, mark the client with the error and return. Signed-off-by:
-
Andy Adamson authored
Separated from nfs41: schedule async session reset Do not kfree the session slot table upon session reset, just re-initialize it. Add a boolean to nfs4_proc_create_session to inidicate if this is a session reset or a session initialization. Signed-off-by:
-
Andy Adamson authored
Implement the sequence operation conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Check returned sessionid, slotid and slot sequenceid in decode_sequence. If the server returns different values for sessionID, slotID or slot sequence number than what was sent, the server is looney tunes. Pass the sequence operation status to nfs41_sequence_done in order to determine when to increment the slot sequence ID. Free slot is separated from sequence done. Signed-off-by:
-
Andy Adamson authored
The session is per struct nfs_client, not per nfs_server. Allow the handler to be called with no nfs_server which simplifies the nfs4_proc_async_sequence session renewal call and will let it be used by pnfs file layout data servers. Signed-off-by:
-
Andy Adamson authored
Implement the destroy_session operation conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26Signed-off-by:
-
Andy Adamson authored
Set the mount points rsize and wsize to the negotiated session fore channel maximum response and requeset size. These values will be bound checked in nfs_server_set_fsinfo. Signed-off-by:
-
Andy Adamson authored
Invalidate the session if the server returns invalid fore or back channel attributes. Use a KERN_WARNING to report the fatal session estabishment error. Signed-off-by:
-
Andy Adamson authored
Implement the create_session operation conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Set the real fore channel max operations to preserve server resources. Note: If the server returns < NFS4_MAX_OPS, the client will very soon get an NFS4ERR_TOO_MANY_OPS. A later patch will handle this. Set the max_rqst_sz and max_resp_sz to PAGE_SIZE - we preallocate the buffers. Set the back channel max_resp_sz_cached to zero to force the client to always set csa_cachethis to FALSE because the current implementation of the back channel DRC only supports caching the CB_SEQUENCE operation. The client back channel server supports one slot, and desires 2 operations per compound. Signed-off-by:
-
Andy Adamson authored
get_lease_time uses the FSINFO rpc operation to get the lease time attribute. nfs4_get_lease_time() is only called from the state manager on session setup so don't recover from clientid or sequence level errors. We do need to recover from NFS4ERR_DELAY or NFS4ERR_GRACE. Use NFS4_POLL_RETRY_MIN - the Linux server returns NFS4ERR_DELAY when an upcall is needed to resolve an uncached export referenced by a file handle. [nfs41: sequence res use slotid] Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Benny Halevy authored
Implement the exchange_id operation conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Unlike NFSv4.0, NFSv4.1 requires machine credentials. RPC_AUTH_GSS machine credentials will be passed into the kernel at mount time to be available for the exchange_id operation. RPC_AUTH_UNIX root mounts can use the UNIX root credential. Store the root credential in the nfs_client struct. Without a credential, NFSv4.1 state renewal fails. [nfs41: establish clientid via exchange id only if cred != NULL] Signed-off-by: Andy Adamson<andros@umich.edu> Signed-off-by:
-
Andy Adamson authored
Separate delegreturn calls from nfs41: sequence setup/done support Implement the delegreturn rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Separate commit calls from nfs41: sequence setup/done support Implement the commit rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by:
-
Andy Adamson authored
Separate write calls from nfs41: sequence setup/done support Implement the write rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by:
Andy Adamson <andros@umich.edu> Signed-off-by:
-
Andy Adamson authored
Implement the read rpc_call_prepare method for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by:
-
Andy Adamson authored
Implement the rpc_call_prepare methods for asynchronuos nfs rpcs, call nfs41_setup_sequence from respective rpc_call_validate_args methods. Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Separate nfs4_locku calls from nfs41: sequence setup/done support Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by:
-
Andy Adamson authored
Separate nfs4_lock calls from nfs41: sequence setup/done support Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
Andy Adamson authored
Separate nfs4_open calls from nfs41: sequence setup/done support Call nfs4_sequence_done from respective rpc_call_done methods. Note that we need to pass a pointer to the nfs_server in calls data for passing on to nfs4_sequence_done. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by:
-
