- 23 Aug, 2007 40 commits
-
-
Andrew Morton authored
drivers/video/console/newport_con.c: In function `newport_console_init': drivers/video/console/newport_con.c:743: warning: return makes integer from pointer without a cast Although one wonders whether that should have been -ENODEV... Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
In file included from drivers/video/console/newport_con.c:16: include/linux/selection.h:16: warning: "struct tty_struct" declared inside parameter list include/linux/selection.h:16: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by:
-
Stephen Rothwell authored
This is the correct fix according to Paul Mackerras and allows an allyesconfig on PPC64 to build. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Mathieu Desnoyers authored
Xen i386 xen-head.S fix sections mixup xen-head.S does not come back to the data section, leaving the text section as current section. It causes problems with a slightly enhanced DEBUG_RODATA that supports CONFIG_HOTPLUG and bringing a CPU up after the text has been marked read-only: reference to early_gdt_descr causes a page fault. Updates: - It should be using pushsection/popsection. - Actually, the push/popsections around the ELFNOTEs are redundant; ELFNOTE() does its own push/popsection to put things into the appropriate .note* section anyway. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Oleg Nesterov authored
de_thread: if (atomic_read(&oldsighand->count) <= 1) BUG_ON(atomic_read(&sig->count) != 1); This is not safe without the rmb() in between. The results of two correctly ordered __exit_signal()->atomic_dec_and_test()'s could be seen out of order on our CPU. The same is true for the "thread_group_empty()" case, __unhash_process()'s changes could be seen before atomic_dec_and_test(&sig->count). On some platforms (including i386) atomic_read() doesn't provide even the compiler barrier, in that case these checks are simply racy. Remove these BUG_ON()'s. Alternatively, we can do something like BUG_ON( ({ smp_rmb(); atomic_read(&sig->count) != 1; }) ); Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
David Brownell authored
Minor tweaks to rtc-max6902: make it hotplug correctly, and fix a few space-before-tab whitespace botches. This driver has no current in-tree users, so the hotplug fix changes the driver name. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Christoph Lameter authored
Print a big fat warning and do what is necessary to continue if a node is marked as up (meaning either node is online (upstream) or node has memory (Andrew's tree)) but allocations from the node do not succeed. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Christoph Lameter authored
SLUB is using atomic_read() for variables declared atomic_long_t. Switch to atomic_long_read(). Signed-off-by:
-
Miguel Ojeda authored
This one-liner patch fixes a bug in drivers/auxdisplay/cfag12864b.c At cfag12864b_init(), the driver tries to kalloc some memory in the variable cfag12864b_cache. Then, as usual, it checks if the call failed. However, it checks cfag12864b_buffer instead. This patch changes the "cfag12864b_buffer" to "cfag12864b_cache" so the correct variable is checked. Signed-off-by:
Miguel Ojeda <maxextreme@gmail.com> Signed-off-by:
-
Olof Johansson authored
Add PCI IDs for the onchip UARTs on PA Semi PWRficient. Signed-off-by:
Olof Johansson <olof@lixom.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Ian Kent authored
Due to inconsistent locking in the VFS between calls to lookup and revalidate deadlock can occur in the automounter. The inconsistency is that the directory inode mutex is held for both lookup and revalidate calls when called via lookup_hash whereas it is held only for lookup during a path walk. Consequently, if the mutex is held during a call to revalidate autofs4 can't release the mutex to callback the daemon as it can't know whether it owns the mutex. This situation happens when a process tries to create a directory within an automount and a second process also tries to create the same directory between the lookup and the mkdir. Since the first process has dropped the mutex for the daemon callback, the second process takes it during revalidate leading to deadlock between the autofs daemon and the second process when the daemon tries to create the mount point directory. After spending quite a bit of time trying to resolve this on more than one occassion, using rather complex and ulgy approaches, it turns out that just delaying the hashing of the dentry until the create operation works fine. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Jeff Dike authored
The previous patch which limited the number of sectors in a single request to a COWed device was correct in concept, but the limit was implemented in the wrong place. By putting it in ubd_add, it covered the cases where the COWing was specified on the command line. However, when the command line only has the COW file specified, the fact that it's a COW file isn't known until it's opened, so the limit is missed in these cases. This patch moves the sector limit from ubd_add to ubd_open_dev. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
NeilBrown authored
When a raid1 array is reshaped (number of drives changed), the list of devices is compacted, so that slots for missing devices are filled with working devices from later slots. This requires the "rd%d" symlinks in sysfs to be updated. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
Commit 17571284 was slightly bad. If an array has a write-intent bitmap, and you remove a drive, then readd it, only the changed parts should be resynced. However after the above commit, this only works if the array has not been shut down and restarted. This is because it sets 'fullsync' at little more often than it should. This patch is more careful. Signed-off-by:
-
Evgeniy Polyakov authored
In case bus master driver provided bogus value as its private data, search can be incorrect. Problem found by Adrian Bunk. Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adam Litke authored
It seems a simple mistake was made when converting follow_hugetlb_page() over to the VM_FAULT flags bitmasks (in "mm: fault feedback #2", commit 83c54070). By using the wrong bitmask, hugetlb_fault() failures are not being recognized. This results in an infinite loop whenever follow_hugetlb_page is involved in a failed fault. Signed-off-by:
Adam Litke <agl@us.ibm.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Paul Fulghum authored
Get module reference on open() by generic HDLC to prevent module from unloading while interface is active. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Siddha, Suresh B authored
Skip calling cache_free_alien() when the platform is not numa capable. This will avoid cache misses that happen while accessing slabp (which is per page memory reference) to get nodeid. Instead use a global variable to skip the call, which is mostly likely to be present in the cache. This gives a 0.8% performance boost with the database oltp workload on a quad-core SMP platform and by any means the number is not small :) Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
-
Mijo Safradin authored
trivial change: fix warning Signed-off-by:
Mijo Safradin <safradin@de.ibm.com> Acked-by:
Christian Krafft <krafft@de.ibm.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Oleg Nesterov authored
With this patch any thread can dequeue its own private signals via signalfd, even if it was created by another sub-thread. To do so, we pass "current" to dequeue_signal() if the caller is from the same thread group. This also fixes the scheduling of posix timers broken by the previous patch. If the caller doesn't belong to this thread group, we can't handle __SI_TIMER case properly anyway. Perhaps we should forbid the cross-process signalfd usage and convert ctx->tsk to ctx->sighand. Signed-off-by:
-
Oleg Nesterov authored
dequeue_signal: if (__SI_TIMER) { spin_unlock(&tsk->sighand->siglock); do_schedule_next_timer(info); spin_lock(&tsk->sighand->siglock); } Unless tsk == curent, this is absolutely unsafe: nothing prevents tsk from exiting. If signalfd was passed to another process, do_schedule_next_timer() is just wrong. Add yet another "tsk == current" check into dequeue_signal(). This patch fixes an oopsable bug, but breaks the scheduling of posix timers if the shared __SI_TIMER signal was fetched via signalfd attached to another sub-thread. Mostly fixed by the next patch. Signed-off-by: -
Oleg Nesterov authored
sys_timer_create() sets ->it_process and unlocks ->siglock, then checks tmr->it_sigev_notify to define if get_task_struct() is needed. We already passed ->it_id to the caller, another thread can delete this timer and free its memory in between. As a minimal fix, move this code under ->siglock, sys_timer_delete() takes it too before calling release_posix_timer(). A proper serialization would be to take ->it_lock, we add a partly initialized timer on posix_timers_id, not good. Signed-off-by:
-
Thomas Gleixner authored
timer_delete does: lock_timer(); timer->it_process = NULL; unlock_timer(); release_posix_timer(); timer->it_process is checked in lock_timer() to prevent access to a timer, which is on the way to be deleted, but the check happens after idr_lock is dropped. This allows release_posix_timer() to delete the timer before the lock code can check the timer: CPU 0 CPU 1 lock_timer(); timer->it_process = NULL; unlock_timer(); lock_timer() spin_lock(idr_lock); timer = idr_find(); spin_lock(timer->lock); spin_unlock(idr_lock); release_posix_timer(); spin_lock(idr_lock); idr_remove(timer); spin_unlock(idr_lock); free_timer(timer); if (timer->......) Change the locking to prevent this. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature() and avoid problems on platforms that don't have readb(). Let the few legacy (ISA || PCI || X86) drivers that need check_signature() select CONFIG_CHECK_SIGNATURE. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Geert Uytterhoeven authored
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible drivers/char/keyboard.c: In function 'kbd_keycode': drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons' The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on m68k because it's hidden in the middle of a big #ifdef block. Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and include <linux/kbd_kern.h> where needed. Signed-off-by:
-
Geert Uytterhoeven authored
zorro: Make the sysfs `config' attribute read-only, as you cannot write to it (there's no .write function neither). Signed-off-by:
-
Geert Uytterhoeven authored
m68k: Fix a few hickups in drivers/scsi/Kconfig Signed-off-by:
-
Roman Zippel authored
Don't include RODATA into text segment as it includes the kallsyms data and can cause spurious link failures (layout differences can change the number of symbols in kallsyms, i.e. when a symbol is equal to _etext it's not included). Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Alan Cox authored
Add the needed constants and defines to activate the existing code. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Geert Uytterhoeven authored
m68k: Use _AC() instead of #ifdef __ASSEMBLY__ hackery when needed, remove hackery when unused. Signed-off-by:
-
Johannes Berg authored
When suspend is ever implemented for pmu68k it really should follow the generic pm_ops concept and not mirror the platform-specific /dev/pmu device with ioctls on it. Hence, this patch removes the unused code there; should the implementers need it they can look at via-pmu.c and/or the history of the file. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Roman Zippel authored
Remove an unnecessary m68k_memoffset export and initialization Signed-off-by:
-
Geert Uytterhoeven authored
Kill a superfluous extern declaration Signed-off-by:
-
Geert Uytterhoeven authored
m68k: <asm/page.h> needs <linux/compiler.h> because of __attribute_const__ Signed-off-by:
-
Alan Cox authored
The new exec code inserts an accounted vma into an mm struct which is not current->mm. The existing memory check code has a hard coded assumption that this does not happen as does the security code. As the correct mm is known we pass the mm to the security method and the helper function. A new security test is added for the case where we need to pass the mm and the existing one is modified to pass current->mm to avoid the need to change large amounts of code. (Thanks to Tobias for fixing rejects and testing) Signed-off-by:
-
David Brownell authored
The new rtc-m41t80 driver name doesn't match its module name, which prevents it from properly hotplugging. Since it's new, no platforms yet depend on that name ... so this patch fixes the driver name to match its module name, rather than going the other way around with a MODULE_ALIAS(). NOTE: This sort of bug is a new thing to watch out for with new-style I2C drivers; previously I2C couldn't hotplug. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Andy Whitcroft authored
Lumpy reclaim works by selecting a lead page from the LRU list and then selecting pages for reclaim from the order-aligned area of pages. In the situation were all pages in that region are inactive and not referenced by any process over time, it works well. In the situation where there is even light load on the system, the pages may not free quickly. Out of a area of 1024 pages, maybe only 950 of them are freed when the allocation attempt occurs because lumpy reclaim returned early. This patch alters the behaviour of direct reclaim for large contiguous blocks. The first attempt to call shrink_page_list() is asynchronous but if it fails, the pages are submitted a second time and the calling process waits for the IO to complete. This may stall allocators waiting for contiguous memory but that should be expected behaviour for high-order users. It is preferable behaviour to potentially queueing unnecessary areas for IO. Note that kswapd will not stall in this fashion. [apw@shadowen.org: update to version 2] [apw@shadowen.org: update to version 3] Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Andy Whitcroft authored
As pointed out by Mel when reclaim is applied at higher orders a significant amount of IO may be started. As this takes finite time to drain reclaim will consider more areas than ultimatly needed to satisfy the request. This leads to more reclaim than strictly required and reduced success rates. I was able to confirm Mel's test results on systems locally. These show that even under light load the success rates drop off far more than expected. Testing with a modified version of his patch (which follows) I was able to allocate almost all of ZONE_MOVABLE with a near idle system. I ran 5 test passes sequentially following system boot (the system has 29 hugepages in ZONE_MOVABLE): 2.6.23-rc1 11 8 6 7 7 sync_lumpy 28 28 29 29 26 These show that although hugely better than the near 0% success normally expected we can only allocate about a 1/4 of the zone. Using synchronous reclaim for these allocations we get close to 100% as expected. I have also run our standard high order tests and these show no regressions in allocation success rates at rest, and some significant improvements under load. This patch: We are transitioning pages from active to inactive in clear_active_flags, those need counting as PGDEACTIVATE vm events. Signed-off-by:
-
Yoshinori Sato authored
Build error fix. Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Michael Neuling authored
Commit b663a79c ("taskstats: add context-switch counters") incorrectly removed a comma from a printf statement. This causes corruption in the output printing or a seg fault. Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
