- 11 May, 2007 40 commits
-
-
Dan Williams authored
Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Use standard IW_MODE_* constants instead. Signed-off-by:
-
Dan Williams authored
Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the WPAenabled and WPA2enabled members. Signed-off-by:
-
Dan Williams authored
Remove WLAN_802_11_AUTHENTICATION_MODE enum and use IW_AUTH_ALG_* instead. Signed-off-by:
-
Dan Williams authored
Obsoleted by SIOCSIWGENIE. Signed-off-by:
-
Dan Williams authored
Remove setencryptionmode private ioctl and Encryptionmode variable. Mostly unused, and its functionality is provided by other internal members like WEPstatus, WPAenabled, WPA2enabled, and SIOCSIWGENIE. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Obsoleted by SIOCSIWAUTH's IW_AUTH_80211_AUTH_ALG option introduced by WE-18. Signed-off-by:
-
Dan Williams authored
Useless; it set an internal variable that was unused anyway. A supplicant handles all 802.1x authentication, not the driver. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Start to normalize bss_descriptor with ieee80211_network so we can eventually replace bss_descriptor more easily. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: further UTF-8 fixes and name correction Fix wrong identifier name in Documentation/kref.txt
-
David Woodhouse authored
> -** Copyright 1994 by Bj<94>rn Brauel > +** Copyright 1994 by Bj”rn Brauel I think these were cp437, and it should read 'Björn'. (asm-m68k/atari*.h) Also note that Arnaldo just put more legacy noise into CREDITS... Signed-off-by:Adrian Bunk <bunk@stusta.de>
-
Satyam Sharma authored
There's a typo / wrong identifier name in Documentation/kref.txt. Fix it. Signed-off-by:
Satyam Sharma <ssatyam@cse.iitk.ac.in> Acked-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-ip22Linus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-ip22: Convert SGI IP22 and specific drivers to platform_device.
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Rework cobalt_board_id [MIPS] Use RTC_CMOS for Cobalt [MIPS] Use platform_device for Cobalt UART [MIPS] Separate Alchemy processor based boards config [MIPS] Fix build error in atomic64_cmpxchg [MIPS] Run checksyscalls for N32 and O32 ABI [MIPS] tlbex: use __maybe_unused [MIPS] excite: use __maybe_unused [MIPS] Add extern cobalt_board_id [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS [MIPS] Rename tb0229_defconfig to tb0219_defconfig [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219. [MIPS] Add minimum defconfig for RBHMA4200 [MIPS] SB1: Build fix. [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno() [MIPS] clocksource: use CLOCKSOURCE_MASK() macro [MIPS] Remove LIMITED_DMA support [MIPS] Remove Momenco Jaguar ATX support [MIPS] Remove Momenco Ocelot G support [MIPS] FPU hazard handling ...
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: Fix compile/link of init/do_mounts.c with !CONFIG_BLOCK When stacked block devices are in-use (e.g. md or dm), the recursive calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] Abnormal End of Processes [PATCH] match audit name data [PATCH] complete message queue auditing [PATCH] audit inode for all xattr syscalls [PATCH] initialize name osid [PATCH] audit signal recipients [PATCH] add SIGNAL syscall class (v3) [PATCH] auditing ptrace
-
Linus Torvalds authored
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release() HID: add hooks for getkeycode() and setkeycode() methods HID: switch to using input_dev->dev.parent USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk USB HID: usb_buffer_free() cleanup USB HID: report descriptor of Cypress USB barcode readers needs fixup Bluetooth HID: HIDP - don't initialize force feedback USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description HID: add input mappings for non-working keys on Logitech S510 remote
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) [NETFILTER]: xt_conntrack: add compat support [NETFILTER]: iptable_raw: ignore short packets sent by SOCK_RAW sockets [NETFILTER]: iptable_{filter,mangle}: more descriptive "happy cracking" message [NETFILTER]: nf_nat: Clears helper private area when NATing [NETFILTER]: ctnetlink: clear helper area and handle unchanged helper [NETFILTER]: nf_conntrack: Removes unused destroy operation of l3proto [NETFILTER]: nf_conntrack: Removes duplicated declarations [NETFILTER]: nf_nat: remove unused argument of function allocating binding [NETFILTER]: Clean up table initialization [NET_SCHED]: Avoid requeue warning on dev_deactivate [NET_SCHED]: Reread dev->qdisc for NETDEV_TX_OK [NET_SCHED]: Rationalise return value of qdisc_restart [NET]: Fix dev->qdisc race for NETDEV_TX_LOCKED case [UDP]: Fix AF-specific references in AF-agnostic code. [IrDA]: KingSun/DonShine USB IrDA dongle support. [IPV6] ROUTE: Assign rt6i_idev for ip6_{prohibit,blk_hole}_entry. [IPV6]: Do no rely on skb->dst before it is assigned. [IPV6]: Send ICMPv6 error on scope violations. [SCTP]: Do not include ABORT chunk header in the notification. [SCTP]: Correctly copy addresses in sctp_copy_laddrs ... -
Kenichi Nagai authored
When exporting input device bitmaps via compat_ioctl on BIG_ENDIAN platforms evdev calculates data size incorrectly. This causes buffer overflow if user specifies buffer smaller than maxlen. Signed-off-by:
Kenichi Nagai <kenichi3.nagai@toshiba.co.jp> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
NeilBrown authored
During a 'resync' or similar activity, md checks if the devices in the array are otherwise active and winds back resync activity when they are. This test in done in is_mddev_idle, and it is somewhat fragile - it sometimes thinks there is non-sync io when there isn't. The test compares the total sectors of io (disk_stat_read) with the sectors of resync io (disk->sync_io). This has problems because total sectors gets updated when a request completes, while resync io gets updated when the request is submitted. The time difference can cause large differenced between the two which do not actually imply non-resync activity. The test currently allows for some fuzz (+/- 4096) but there are some cases when it is not enough. The test currently looks for any (non-fuzz) difference, either positive or negative. This clearly is not needed. Any non-sync activity will cause the total sectors to grow faster than the sync_io count (never slower) so we only need to look for a positive differences. If we do this then the amount of in-flight sync io will never cause the appearance of non-sync IO. Once enough non-sync IO to worry about starts happening, resync will be slowed down and the measurements will thus be more precise (as there is less in-flight) and control of resync will still be suitably responsive. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Robert P. J. Day authored
Remove the obsolete "if [ ]" construct from the video console Kconfig file. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Convert internal wait_pm2() function to fb API fb_sync() method. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Jean Delvare authored
Let the user enable debugging messages in nvidiafb. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Fix rivafb's I2C getscl callback function, as was done in nvidiafb recently. Signed-off-by:
-
Nicolas Ferre authored
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by:
Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by:
-
Krzysztof Helt authored
This is a basic port from 2.4 kernel to 2.6. Acceleration is lost and big endian support probably too. The driver works in 8, 16 and 32 bit mode. [adaplas] - change VESA_* to FB_BLANK_* constants - removed unused function clear_memory - fix uninitialized variable compiler warning - some whitespace cleaning [akpm@linux-foundation.org: Nuke pestiferous CVS string] Signed-off-by:
-
Michal Piotrowski authored
ups... coding style. Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Davide Libenzi authored
Re-arrange epoll code to avoid static functions pre-declarations, and apply akpm-filter on it. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
-
Davide Libenzi authored
Epoll is either compiled it, or not (if EMBEDDED). Remove the module code and use fs_initcall(). Signed-off-by:
-
Davide Libenzi authored
Cut out lots of code from epoll, by reusing the anonymous inode source patch (fs/anon_inodes.c). Signed-off-by:
-
Davide Libenzi authored
This is an example about how to add eventfd support to the current KAIO code, in order to enable KAIO to post readiness events to a pollable fd (hence compatible with POSIX select/poll). The KAIO code simply signals the eventfd fd when events are ready, and this triggers a POLLIN in the fd. This patch uses a reserved for future use member of the struct iocb to pass an eventfd file descriptor, that KAIO will use to post events every time a request completes. At that point, an aio_getevents() will return the completed result to a struct io_event. I made a quick test program to verify the patch, and it runs fine here: http://www.xmailserver.org/eventfd-aio-test.c The test program uses poll(2), but it'd, of course, work with select and epoll too. This can allow to schedule both block I/O and other poll-able devices requests, and wait for results using select/poll/epoll. In a typical scenario, an application would submit KAIO request using aio_submit(), and will also use epoll_ctl() on the whole other class of devices (that with the addition of signals, timers and user events, now it's pretty much complete), and then would: epoll_wait(...); for_each_event { if (curr_event_is_kaiofd) { aio_getevents(); dispatch_aio_events(); } else { dispatch_epoll_event(); } } Signed-off-by:
-
Davide Libenzi authored
This patch wires the eventfd system call to the x86 architectures. Signed-off-by:
-
Davide Libenzi authored
This is a very simple and light file descriptor, that can be used as event wait/dispatch by userspace (both wait and dispatch) and by the kernel (dispatch only). It can be used instead of pipe(2) in all cases where those would simply be used to signal events. Their kernel overhead is much lower than pipes, and they do not consume two fds. When used in the kernel, it can offer an fd-bridge to enable, for example, functionalities like KAIO or syslets/threadlets to signal to an fd the completion of certain operations. But more in general, an eventfd can be used by the kernel to signal readiness, in a POSIX poll/select way, of interfaces that would otherwise be incompatible with it. The API is: int eventfd(unsigned int count); The eventfd API accepts an initial "count" parameter, and returns an eventfd fd. It supports poll(2) (POLLIN, POLLOUT, POLLERR), read(2) and write(2). The POLLIN flag is raised when the internal counter is greater than zero. The POLLOUT flag is raised when at least a value of "1" can be written to the internal counter. The POLLERR flag is raised when an overflow in the counter value is detected. The write(2) operation can never overflow the counter, since it blocks (unless O_NONBLOCK is set, in which case -EAGAIN is returned). But the eventfd_signal() function can do it, since it's supposed to not sleep during its operation. The read(2) function reads the __u64 counter value, and reset the internal value to zero. If the value read is equal to (__u64) -1, an overflow happened on the internal counter (due to 2^64 eventfd_signal() posts that has never been retired - unlickely, but possible). The write(2) call writes an __u64 count value, and adds it to the current counter. The eventfd fd supports O_NONBLOCK also. On the kernel side, we have: struct file *eventfd_fget(int fd); int eventfd_signal(struct file *file, unsigned int n); The eventfd_fget() should be called to get a struct file* from an eventfd fd (this is an fget() + check of f_op being an eventfd fops pointer). The kernel can then call eventfd_signal() every time it wants to post an event to userspace. The eventfd_signal() function can be called from any context. An eventfd() simple test and bench is available here: http://www.xmailserver.org/eventfd-bench.c This is the eventfd-based version of pipetest-4 (pipe(2) based): http://www.xmailserver.org/pipetest-4.c Not that performance matters much in the eventfd case, but eventfd-bench shows almost as double as performance than pipetest-4. [akpm@linux-foundation.org: fix i386 build] [akpm@linux-foundation.org: add sys_eventfd to sys_ni.c] Signed-off-by:
-
Davide Libenzi authored
This patch implements the necessary compat code for the timerfd system call. Signed-off-by:
-
Davide Libenzi authored
This patch wires the timerfd system call to the x86 architectures. Signed-off-by:
-
